Hi Ben definitely the knowledge that you share is awesome. I have driven my Himalayan which was bought in Jan 2020 to 65000 kms and changed my clutch assembly just now. Kick start Garage, Basil and team has been servicing my bike and also his knowledge is amazing. Keep up your good work 👍👍👍
Thanks Ben, I'm about to open the clutch cover on my wife's bike. Very stiff clutch operation - I've checked the obvious items - so it is time to open the cover to have a good look around. I suspect grooves or 'notches' in the basket where the plates are sticking. Time to file the basket smooth.
Yes that could be a reason , but an improper routing or kinked wire can contribute to a lot of stiffness to . Try different routing other than factory and see if it makes a difference.
good evening, I dismantled my clutch and reassembled it like in many videos with the last disc shifted (see photo) and surprise impossible to disengage, I searched for a while, I dismantled 5 times maybe more :demon: (a headache) and checked the order of the parts with the manual (it's not complicated lol) and I saw an Indian video where the last disk is in alignment with the others and miraculously it works what is the right method?
@@boardonroad1325 depends on the damage . A GOOD / honest MECHANIC will tell you the right thing to do . The service stations will always go with the easy options.
I am Using prospec easy clutch after 15000 km my gear shift is really tight , RE suggesting changing the clutch plate, is prospect clutch causing it ! can u help!
Hi Ben, I'm facing a problem with the Himalayan clutch. When the motor is cold, usually in the morning, the first time I start the bike the clutch makes a huge noise when I release it. Then everything goes normally .
Hi Ben, I bought a Himalayan in Dec 2021 and bike has run 3300kms so far. I had issues with acceleration for which the service center guys say the clutch assembly has worn out and needs to be changed and they are not ready to cover it under warranty. I am really surprised the clutch has worn out. What could be the issue here? I went for a ride to Kerala from Chennai and did a bit of off roading.
Bro_need help here regarding clutch push rod where can i get one through online??? And aslo wanted the windscreen washer and nuts where do i get one with perfect fit??
This has become the "go to channel" when it comes to RE Himalayan. Good work.
Hi Ben definitely the knowledge that you share is awesome. I have driven my Himalayan which was bought in Jan 2020 to 65000 kms and changed my clutch assembly just now. Kick start Garage, Basil and team has been servicing my bike and also his knowledge is amazing.
Keep up your good work 👍👍👍
Great content, well presented - thank you!
I have now 15.000 km on my BS4 Himalayan from 2020, no issues so far but great fun!
Great to hear!
Thanks Ben, I'm about to open the clutch cover on my wife's bike. Very stiff clutch operation - I've checked the obvious items - so it is time to open the cover to have a good look around. I suspect grooves or 'notches' in the basket where the plates are sticking. Time to file the basket smooth.
Yes that could be a reason , but an improper routing or kinked wire can contribute to a lot of stiffness to . Try different routing other than factory and see if it makes a difference.
Great video again, Ben, again.
Awesome brother ❤️.keep doing more interesting content. waiting for offroading videos 🏍️💨💨
Sure , very soon
Those washers are called external Star washers. Locally also known as flower washers
Thank you 🙏
@@ONTWOWHEELSBEN hi Sir, just booked my Himalayan a week ago, can you tell me if bs6 one has any problem which might consider me to cancel my order.?
good evening, I dismantled my clutch and reassembled it like in many videos with the last disc shifted (see photo) and surprise impossible to disengage, I searched for a while, I dismantled 5 times maybe more :demon: (a headache) and checked the order of the parts with the manual (it's not complicated lol) and I saw an Indian video where the last disk is in alignment with the others and miraculously it works
what is the right method?
I need to know what the disc measures, I need to find a compatible part from another brand here in Brazil
Pls check for specs of the bike online
Should I change clutch plate or whole assembly
Service center say I Should change whole clutch assembly
@@boardonroad1325 depends on the damage . A GOOD / honest MECHANIC will tell you the right thing to do . The service stations will always go with the easy options.
My 411 has done 64kms, do you think it's time to change the clutch plates ?
@@upward_onward yes
@@ONTWOWHEELSBEN Thank you.
Great Job Bro!!!
I am Using prospec easy clutch after 15000 km my gear shift is really tight , RE suggesting changing the clutch plate, is prospect clutch causing it ! can u help!
Great information BEN.
Hi Ben, I'm facing a problem with the Himalayan clutch. When the motor is cold, usually in the morning, the first time I start the bike the clutch makes a huge noise when I release it. Then everything goes normally .
Same here
Warm up the engine before the ride
@@x-hacker-2648 Sometimes doesn't work for me. I'm afraid of reducing lifetime.
WATCH MY FIX HARD GEAR SHIFTS VIDEO . And perform the last exercise 2 times a week till the problem goes away
Hi ben sir mine bike is 2022 model himalayan but its really having a high tappet noise is there any solution fo that
Same issue with my bike service centre guys say that every bike will be like that and they don't know what is wrong with the bike
Finally, Amsoil video next 😃
Yup
perfect work 👍👍👍👍👍
Good job ben, very useful video, by the way where ithe kick start garage? please share the contact details.
Tyre tubeless akan plan ondo??
Hi Ben, I bought a Himalayan in Dec 2021 and bike has run 3300kms so far. I had issues with acceleration for which the service center guys say the clutch assembly has worn out and needs to be changed and they are not ready to cover it under warranty. I am really surprised the clutch has worn out. What could be the issue here? I went for a ride to Kerala from Chennai and did a bit of off roading.
IF it is the case ( clutch worn out ) . The. It clearly means you have burnt the clutch plates ( wrong clutching habits ) .
Does changing clutch plates reduce hard clutch
No unless there is something wrong with your clucth plates . Watch my FIX HARD GEAR SHIFTS VIDEO
Bro_need help here regarding clutch push rod where can i get one through online??? And aslo wanted the windscreen washer and nuts where do i get one with perfect fit??
Wr r u from
@@ONTWOWHEELSBEN from the North east try few Enfield store but couldn't find the one's i mentioned
@@highhope4456 pls contact KICKSTART GARAGE ( google for ph no )
prize ??
Thanks for sharing OTWB . atb
😊Jakob😅