Tamiya Mini 4WD - DCR01 (MA) Bmax Build + Test Run
Вставка
- Опубліковано 15 вер 2024
- Parts with Item number for reference
FRP Mount Plate Set (15150)
Double Aluminum Rollers (13-12mm) 15398
HI-MOUNT Tube Stabilizer Set (Black) 15528
Aluminum Spacer Set (12/6.7/6/3/1.5mm) (15473)
2mm Lock Nut - 10pcs (94690)
Stainless Steel Countersunk Screw Set (10/12/20/25/30mm) 15510
Stainless Steel Countersunk crew Set (6/8/15mm) 15527
FRP Multi Reinforcing Plate 15193
Cylinder Damper Pair
Side Mass Damper Set - AR Chassis (15459)
FRP REAR BRAKE STAY SET 15518
FRP Plate for Super X Chassis 15242
FRP Rear Roller Stay for Super X Chassis 15243
Mini 4WD 13mm Dia. Roller Ball Bearings (2pcs.) II 15475
Mini 4WD PRO Gear Bearing Set (for MS Chassis) 15347
Mini 4WD PRO High Speed EX Gear Set (for MS Chassis/Gear Ratio 3.7:1) 15429
Mini Round Hold Ball Bearing Set
Super Hard Low-Profile Tire (Black) 95119
Connect with me!
- Facebook: DEE Mini 4WD PH
- Instagram: deemini4wdph
- UA-cam: DEE Mini 4WD PH
loving your thorough explanation . done subscribe . love from Malaysia
@@armedeuz981 thank you :) appreciate it
Nice! 👍
@@roscoechannel thank you roscoe
I like your Bmax setup.. thanks for sharing 🙏
Thank you :) happy racing
solid build sir!
Thank you sir. Wait for my new video on my new build for MA chassis :)
Cool set up ma chassis 🎉🎉🎉🎉🎉
Thank you :) I changed my setup now, it’s now wide. I’ll make a video soon
Sabi ng the brickyard pwese daw yung Large tire?
Thank you sir 😊👏🏁
You’re welcome. Have fun racing
@@DEEMini4WDPH yeah, likewise 😊🏁👏
New subscriber here
Thank you
Good day boss. Few years ago. I had an AR chassis Aero Avante starter kit, I only race prostock nonfm. May I ask, can I use some of the parts like plates and screws in an MA chassis? Because I had a growing interest to build one. Thank you
@@craggyboyhammertime3700 yes sir you can :)
You can message me in facebook DEE Mini 4WD ph so we can talk about your build
Can you please upload some how you break in dash motor and tune motors? That hyper dash looks fast
Hi subie, I need to learn on how to breakin motor first :) actually it’s my friend who process that
short, narrow, heavy, and very rigid build, it runs and sounds like a train
Agree :)
I can’t understand why do you use 13mm roller on the back, in the same hole that recive the 19mm roller…. 🤔
Hi. Because that’s the only hole you can mount the rollers when using super x frp for narrow setup :)
Ok. Clear. The back is narrower than the standard size, it is narrower than the front which takes advantage of the dedicated holes. Am I wrong?
Have you already tried sliding damper for the rear?
Not yet sir, but i heard sliding is good when there’s a digicurve.
For this set up how much is the sum of the parts kit not included
Also what can i buy if my budget is only 1k₱
Hi. Roughly around 2,000-3000 pesos.
You can build this kind of setup for 1000 pesos but mostly the parts will be copy, not original tamiya items. My suggestion is to just save up and buy orig tamiya items one at the time. That’s how I did until i completed my setup. At least you have a peace of mind that you are using orig parts and will last long :)
Hello. Can i ask something again. What rechargeable batteries and what battery capacity do you use
Hi. I’m using eneloop (white) 1900mah battery. You can also try the following below
Fujitsu white (almost the same with eneloop white)
Fujitsu pink (950mah, it’s lighter than eneloop white but wont last that long)
Eneloop pro [black] - 2250mah (heavy and can damage you chassis as it is thicker than eneloop white
Neo champ (950mah) - good battery but expensive
@@DEEMini4WDPH thank you again bro.
@@louiebanal6421 you’re welcome
Is it true ba na MA, CFM at FMA dominates podiums?
Most of the time CFM and FMA dominates podiums.
@@DEEMini4WDPH planning to build MA Chassis for bmax or tmac kasi wala na syang propeller shaft so diretso sa gulong yung power ng motor. Any tips?
@@ixncxrl6627 actually ang nagustuhan ko sa MA chassis is yung low cost maintenance nya since no prop shaft and ung pag ka tibay ng chassis. You can browse my videos meron ako 2 video about bmax budget build and 1 video na tmac setup (hexagonite)
@@ixncxrl6627 for tmac category naman usually ang ngddominate ay fma and s2
@@DEEMini4WDPH I have FMA na yung mach frame same build with yours, since ginaya ko talaga yung sayo 😂. So far so good sobrang stable sya sa track ng brickyard for June (Glorietta & Ayala Malls). Can you reccomend a kit for S2 chassis, thanks!
Sir wla bang sponge brake sa rear?
It depends sir sa layout ng race track. If wala nmn bank na mataas ska mga slope or jump na critical no need na ng sponge sa rear brake plate
👍👍👍
Thank you sir
Bakit po naka labas yong bakal ng gulong para san po yon? Kuha lng po ng idea gusto ko kasi mag balik sa pag tatamiya
Hi sir. Pierced po tawag dun. nagpalit ako ng mas mahabang wheel shaft (72mm) at need patagusin sa rims. Madalas ginagawa to kapag maluwag na ung butas nung kung san nilalagay ung wheel shaft. kapag naka pierced ka super higpit na uit nung rims mo. :)
ilan po speed nya sa speed checker ang hyppro sa 3.7 gear ratio nyo? ty!
Hi sir, naku wala po ako idea since wala ako speedchecker.
Planning to build mach frame bmax set up.
Ano po ma rerecommend mo mag full copy parts or full tamiya orig parts or mixed copy and orig tamiya parts for bmax ?
For me i would go for all orig tamiya parts kahit hindi HG ung plates kasi mabibilis na ung motor ng bmax in a long run mas mabilis masisira ung copy parts. And also para pwde ka sumali sa PH cup ni Brickyard
@@DEEMini4WDPH salamat po. This February 14 po kasi may mag oopen ng tamiya shop and racing center dito sa bicol province.
@@louiebanal6421 nice nice :) good luck sa mga races mo sir :)
Meron ako uli uupload na video soon. Isa pang klase ng build ng bmax ng MA chassis
@@DEEMini4WDPH sige po. Panoodin ko.
Magkano boss magagastos ng bmax build kahit copy parts? Balak ko kasi sana iupgrade yung prostock kit ko.
Hi sir, if regular frp plates lang yung gagamitin mo like ung setup ko nsa 2-3k yung maggastos mo. If hahaluan mo ng copy siguro nsa 1500-2000 lng abutin
What's the best chassis for bmax. MA or FMA??
That’s the same question I asked when I started to build my bmax.
MA - fast but needs fine tuning to make it stable. Less maintenance
Fma - fast and stable but you will need a lot of extra propeller shaft and gears. Easily worn out
@@DEEMini4WDPH thank you for the reply
@@louiebanal6421 you’re welcome. Have fun racing!
FMA , but if you can find the best set up for Ma chassis, It could be fast.