My New Skateboard Set Up ( Curb Board )
Вставка
- Опубліковано 5 жов 2024
- I've been digging the curbs lately so I decided to throw together a setup that would work great for slapping these red curbs out here
CURB BOARD SET UP :
8.6 Hockey deck
Independent standard 159s
56mm Spitfire Full Conicals 99a
Modus Black bearings
Independent 1-inch Phillips head hardware
Powell Peralta Rib Bone deck rails
Mob Grip grip tape
FOLLOW ME ON INSTAGRAM :
/ enukism
JOIN THE MOB TODAY :
www.eveningmob...
I stick my rails on where the concave starts to flatten out, then you can use them to pivot into hurricanes and feebles etc 🤙🏼
I wish i knew this before making this video lol
You skate with the rail Jesus who skates with another rail Jesus that had his own brand of rails. I know I'll be rewatching Dan's stuff for rail placement on my new board.
Looks like heaps of fun. Enjoying the channel heaps, good to hear an Aussie in amongst the yanks too 👍
I should have asked them first where to put the rails lol oh well theyre on now and starting to get broken in
Cheers mate! Im glad you dig the channel!
A couple of things about rails (that may or may not have been said in the comments already)
The further you put your rails into the middle of your boards concave depends really on how you decide to use them (for hurricanes, feebles, bennet, barley, sugarcane, etc) and also, if you've seen how some folks bend their rails and bevel them in toward the middle, is also helpful for the geometry to locking into smith grinds, etc. I bevel mine in.
Hope this helped.
Hack for rails, when you go to install them put some double sided tape on the bottom of em. This will prevent them from getting ripped off while skating. You can get the tape at any local hardware store. Cheers
Never give up on your dreams and aspirations and remember to be kind and uplifting to each other and open minded and genuine.
Much love and respect to you and your channel Sean. I hope that all is well for you and your family and friends.
Boards setup is a good idea to using these tricks and obstacles of making the pressures of every single basic tricks to a huge improvement.
Thanks dude! It was a lot of fun
@@SeanEnuks No Problem Bro!
wider rails makes the board slides more stable. if you wanted to be able to be able to boardslide to hurricane and tricks like that youd want them about inline wih the inside of the wheels.
Modus are a Perth brand local to me, I love the black and blue they got! Big up Seany got me keen on a skate in this bipolar weather
Oh word! I forgot they were aussie! thats even better! Get out there and hit it mate!
You might want smaller wheels for curbs. I’ve been rocking the snot lil boogers and they work a treat
I like my deck rails in about 3.2 cm from the edge. Nice vid
I should have done some research before i did mine like this lol
The rails, I usually put them more in. That's a sweet setup though.
That would work a lot better I think lol, thank you, ive really been enjoying it more and more
Yeah you set your rails up for grabs
I gone done put it all on wrong lol
I like the Modus 7s I have them on all my boards
First set ive had and i dont mind em aye
Can you do a review on Mildura skate park
I just put on rails for the first time since 1987 and I swear I notice a difference in weight!! Did you notice the rails on your deck besides on rail slides?
oh for sure man, its heavier and makes more noise now lol
I prefer a board size 9,indy 169’s,58-60mm wheels and lil jawns rails for a curb setup.
That sounds like a tasty set up dude
I hope that all is well for everyone reading this comment.
Try some small wheels like Spencer nuzzi 🤙🤙😁
I’ve been thinking about a second set up lately might have to do this myself
I got a about 4 set ups now lol its getting wild lol ill do a video one day with them
remmeber how they used to say if you were shit on by a bird on the shoulder it was good luck? One day I realised the whole reason it's good luck is because it didnt shit on your head! I'm not even sure if thats why they say it's good luck or not but it blew my mind. I don't think that is even where the bird shit on the shoulder thing comes from.... but me personally if bird shit landed on my shoulder I would feel like i had good luck because it didnt land on my head.... food for thought
Sick set up, small for me. I'm on a 9.75 polar haha
Damn son!
That's an unusual grip job Sean, why did you leave a bare strip down the side? 🧐🛹
so I only have to cut one side down lol
@@SeanEnuks haha fair enough 👍
No shame in waxing rails, curbs and/or the edge of your deck . IMO, the Powell Rib Bones are a little soft and the NHS rails (Santa Cruz, Creature, etc) slide faster and farther. LilJawns rails are even better.
Wax on everything, I was looking at the santa cruz ones but i really wanted white rails to go with everything
just need to break the rails in.
Suprised you didn’t get the trucks dans riding
I really dig Indys, even over Ace lol
@@SeanEnuks I feel that
What type of camera were you using for the skate clips part?! It looked dope we need more!
Thanks mate! It’s an RCA Autoshot 200x Zoom
ACKA DACKA MATE
How well do the spits glow in the dark?!
Woof woof
😂 😂 😂
This is random but what camera do you use for the old school looking clips?
It’s an RCA Autoshot 200x Zoom
Yo Sean, where’d you get the socket for your drill? What size is the little socket? Been looking for one just like that but I swear they’re hard to find
Its a 3/8ths Imperial socket, by Hitachi, Its my housemates I borrowed lol
@@SeanEnuks dude thank you. I have a driver drill but it’s impossible to find a socket like that without some crazy long adapter reducer contraption 🤣🤦🏽♂️
I'm Rocking the Thunder Titanium Light's 147's with Bones Hard Bushing's they last the longest and Riptide Pivot Cups and with all custom Titanium Hardware straight from Japan I'm talking all the way down to the bushing cups to the 7/8th's hardware to the 4 Axle nuts even the tiny little 4 nuts are titanium that screw on the 7/8th's hardware and it's even got a custom titanium hollow Kingpin from Japan custom made yeah were talking 1 of a kind trucks here Rust free and Extra Extra Strong no more snapping hardware here! on some Bones Swiss Ceramics $160 bearings and some spitfire formula 4's sorry guys didn't mean to shine on ya to hard lol but my setup is next Lvl. not even pro skaters got this type of setup my shit is Crazy wild Banana's lol my board is a Creature 8.25 Vx and MoB Griptape! oh shit not to mention i got sk8kings Steel Bearing spacers its helps put less stress on the bearings don't buy aluminum bearing spacers they will shred inside your bearings and destroy them! also i dont hear about a lot of people rocking the bearing spacers it will save your bearing's and they will last a lot longer.
Kinda small for a curb setup
I think its a nice in between size
8.6? Bros skating a door😂
the widest ive ridden was 8.75!
Noooo! another youtuber with rails. It’s killing me lately. Lol I’m just kidding. If I had the skill to skate curbs I’d probably do it. Just seems like you need to already have extensive years of skating to have developed the balance and feel required for slippery rails.