Fantastic video and it worked perfectly following the clear and concise step by step instructions (5/29/16). Only think I would add is that there are clips to hold the ribbon cables in place (they can pull out but the cables will not push back in without undoing the clips). On the wider of the two ribbon cables, there is an off white clip that needs to be flipped up and then insert the cable and then flip it down. For the smaller ribbon cable there is a black clip that needs to be pulled out and then the cable inserted and the black clip pushed back. Otherwise everything went great. Thanks so much.
Thanks for the video. I've got a Nikon D3200. Some days ago I dropped it and the down navigation button stopped working so yesterday I finally had time to follow this tutorial to take apart the camera and fix the button problem :D Greetings from Mexico!
Hi, thanks for the tutorial. Followed every steps, screen is turning on but I do not see anything on it. Any idea what it could be. I plugged and unplugged both wires twice. They are holding tight and the clips are in place. Maybe I got a bad screen ? Is there a reset on the camera for the screen ? Thanks for your help
so i replaced the screen. before i put everything together i tested it. it worked! great i thought. so i reassembled the camera switched it on and...it doesn't work at all. i can only screen backlight but nothing on the screen. i tried redoing everything, and changing to old screen which kinda worked a little bit and nothing. any advice?
Hey Thanks for the video what's the second screw driver you're using? where can I buy it? Lastl, mine is Nikon D3200, I guess the replacement process is almost the same, right?
So if the LCD is perfectly fine, but you wanted to replace the transparent back cover... does anyone know if that can just be pried off, or would the entire back cover need to be replaced...?
Hi, is it true that nikons require re-programming once a new LCD has been installed? I've heard that the lenses, focus and other inner workings of the camera won't be properly programmed if you do a DIY replacement. Do you know anything about this? What steps did you take right after replacing the LCD to ensure the camera was able to function properly in every way?
Thanks for this Steve - really helpful. The only bit I can't get my head around is reattaching that smaller ribbon wire. It's not really clear from your video how to do that, and as much as I try to push it into the clip, that's just not working. Any additional suggestions? Cheers...
Thanks for the reply. If the images on the internet are to be believed, those displays are from a Taiwanese company called AU Optics, who actually make fantastic displays and also make them for some quite large companies like Samsung. Hopefully, I won't run into any issues either.
The screen arrived and I examined and installed it. It does have the AUO logo on it, however so does the original Nikon screen, but the finishing touches are not the same, which makes me think that AUO does produce displays for Nikon, and is in fact a premium quality Taiwanese brand, but also that the eBay model is a Chinese knock-off that only bears the same logo because of well, obvious attempts at forgery. Disappointing, but hey, it works. :)
is there way to fix the LCD? camera works perfectly but the screen wont show any image all other functions are working but the LCD only shows only for 0.1 sec then turns black help please
I'm not too familiar with LCD screens. It could be the screen is bad, or it could be whatever controls the screen. If you can find the screen for cheap, it may be worth swapping to see if it solves the issue. You could always try and find a camera repair shop to have them diagnose it as well.
Hi Steve, Some weeks ago after a trip the screen of my D5300 just don't turn on more. I didn't hit it and dind't crash or something like that. Tbh I've no idea what happened =/. Could you give some tips what can I do for fix it? Thx in advanced... Btw nice video.
I ordered the screen from a random Chinese website when I did this. Looking now, it seems like a few different websites still carry them. The blew screwdriver I used was just a small one from a hardware store. The smaller metal one is from an eye-glass repair kit that you can buy at most pharmacies in the US. Any electronics, or small size screwdriver should do the trick.
Hi Steve, I have cracked my rear glass screen (not the LCD) on my D3200 but can't seem to locate where I can purchase the replacement glass, I live in the UK. Are you able to advise of anywhere and do they ship to the UK? Do you have a link? Thanks in advance. Andy (ps: great tutorial)
Thanks Steve, I've searched on eBay UK but they all seem to say LCD replacement, it's just the glass I am after. Nikon have them at a ridiculous price. I'll keep looking. Thanks again
Steve, I think I found it at m.ebay.co.uk/itm/Nikon-DSLR-D3200-LCD-Display-Screen-External-Glass-Cover-Replacement-Part-NEW-/271889461226?epid=524220411&hash=item3f4ddfefea%3Ag%3ALxgAAOSwpdpVbr5U&_trkparms=pageci%253Ad715a9ff-a5c9-11e7-a6dd-74dbd180e8ec%257Cparentrq%253Ad252d48a15e0ab4549f2397dffff8e44%257Ciid%253A6
hi? i also have this kind of incident on my Nikon D3100 cam. my grandson took pictures of the group but then he slipped on the ground sending the cam banged at the edge of the cement floor. so that's it for almost a year this happened. it's hard to get contact with an authorized Nikon repairman since I am far from Makati City while our province is in Bohol, Philippines. I've watched your video on how to fix and it inspires me to do it later. my question is what is the name of that replacement parts of the monitor and you bought it at Amazon. I don't know if we have Amazon in our country. and also may i know the price of that replacement part? hope to hear from you more soon..thanks
Thanks for the respoonse Steve..now may i know the price for this screen replacer thing? and we do have EBay in our country but try to look for it there..Salamuch (thanks)..
OMG! Steve ..am desperately back to talk about that Screen Replacement thing that gives me hard time where to buy this since it's not in our country Philippines & how much is the price. i don't know now what to do. Some parts of the camera are already worn out before my cam can be fixed...the 300mm lens hood no longer used, the viewfinder's covered surroundings detached..hahaha...whatta mess!
It probably won't be exactly the same, but similar since they're both Nikon DSLR cameras. I don't have any experience with the D300 to tell you exact differences.
Excellent video, here in 2023 it seems almost impossible to find a store with such d3100 LCDs...not even in China´s shops, any hint will be welcome! mine is broken.I have found second-hand ones but too costly. Help needed!!!
Thank you! I was actually searching last week so I could put a link in the description. I didn't find anything on Amazon or any other well known site. Maybe eBay or local sale pages (fb, craigslist, etc) for a used screen or parts camera is the best option?
@@StevesGarage me either unfortunately. I have found spare parts in some service shops but sellers are aware these LCDs disappeared from market and cast prices over them.. Even being a second hand part.
@@edsonfcordeaca4958 That figures that they're charging a premium for them. It's been a bit since I've searched, but it seems like they disappeared overnight.
Not exactly sure what could be wrong to cause the buttons to not function. Did you drop it, expose it to water, or dirt? Taking it apart to see if something is lodged in there, or if there's a wiring problem wouldn't be a bad idea. Let me know how else I can help.
@@StevesGarage no I didn't drop it or expose it to water however I live in Pakistan and it's very dusty here. I bought it in 2015 and it was a used cam, play button used to misbehave but others were fine. Now others wouldn't work too.
I don't have enough experience with it to know if it's sensitive to dust or not. If it were my camera I'd take it apart to inspect it and see if the issue is visible like a problem with the button itself, or something deeper like a failed electrical connection.
+Erik Olivares I bought it from Amazon if I remember correctly, but they were offered from a lot of places. I just replaced it with the cheapest one I was able to find. I do remember that it took forever to arrive because it came from China. Unfortunately I no longer own the camera, so I can't get the name of the screen I bought. Let me know if you have any other questions!
+Erik Olivares Yes it's easy to replace the screen. Once you remove all the screws around the body so the trim comes off, the screen is right there. The video is pretty detailed and can help you locate all the screws. Let me know if you have any more questions!
can anyone help me get this Nikon D3100 LCD Screen Replacement? i want to have this but i don't know where to buy since I don't know if this is available in our country Philippines. Am willing to pay thru Western Union but on our own currency valued as US$...You can reach thru this channel of mine..hopelessly for 2 yrs now, dreaming of buying this.
how about buying it for me? hehehe..and i will send to you directly my money? if youhave TRUST in me..i'm 24/7 on my Facebook just in case you've being fooled by me..ok?
i've found but this is what i've read: lcd4laptop LCD Screen Display Monitor Repair Part Replacement for Nikon DSLR D3100 5.0 out of 5 stars 1 customer review Price: $39.99 + $4.99 shipping Only 2 left in stock - order soon. This item does not ship to Philippines. Please check other sellers who may ship internationally. Ships from and sold by Halcon.
You didn't hit the manual focus button or something silly like that right? Replacing the screen is nowhere near the autofocus items, so I'm not sure what could have went wrong. It could also be a lens problem. I haven'y had any autofocus issues, and you don't provide much detail so I'm not sure how to help you.
I'm sure I didn't do nothing wrong. It was working right before I replaced the LCD, everything worked great. Then the autofocus doesn't work, the motor doesn't work but the infrared light turns on. I googled and found out that a firmware update will fix it. I'll give it a try.
I just updated the latest firmware and it didn't help. The autofocus motor doesn't start, no matter what setting I'm in. I did the basics, cleaning the mirror, the autofocus sensors, bla bla and what not. It was working right before I replaced the LCD, I might've messed something up. I've no idea how to fix it.
+Fazal Fariz I'm not sure how the LCD screen is related to the autofocus, so it's tough for me to help diagnose what could have happened during the screen replacement. It might be worth bringing to a professional to have them check it out. Good luck and let me know if there is anything else I can do.
Brilliant - thanks Steve... straightforward, clear and concise instructions
Thanks Nick, that's my goal!
Fantastic video and it worked perfectly following the clear and concise step by step instructions (5/29/16). Only think I would add is that there are clips to hold the ribbon cables in place (they can pull out but the cables will not push back in without undoing the clips). On the wider of the two ribbon cables, there is an off white clip that needs to be flipped up and then insert the cable and then flip it down. For the smaller ribbon cable there is a black clip that needs to be pulled out and then the cable inserted and the black clip pushed back. Otherwise everything went great. Thanks so much.
Thank you so much, this helped me from ripping everything off.
Needed to change the memory card access door as I broke it in two. Your video helped me locate those pesky hidden screws, many thanks
Used this for the D3200- very similar, great help- thankyou.
Hi Steve, thanks for the tutorial. I'm able to fix the broken LCD screen issue for my D3100.Thanks for sharing this video.
This helped me to get to the viewfinder to replace it. Now I know how to replace the lcd if it ever breaks. Thank you.
You got it! Happy I could help solve another issue too!
Awesome Guide! Worked fine - just one remark: the case screws are different from each other - so note down which one goes where
You're right, great note! Glad it helped you fix your camera.
Thanks for the video. I've got a Nikon D3200. Some days ago I dropped it and the down navigation button stopped working so yesterday I finally had time to follow this tutorial to take apart the camera and fix the button problem :D Greetings from Mexico!
Thanks a lot man! Just replaced the broken display of my D3200. Its almost the same as yours 3100...
Thanks for this video! I replaced the screen without a problem! I was very careful about the tiny screws and which step they went with.
THANKS!! This made changing the screen a breeze!!
i have the same problem and this sure is gonna help me out alot thanks 😄
Hey Steve! What website online did you buy the LCD screen from?
Thank you. So helpful
You're welcome, glad it helped!
Hi, thanks for the tutorial. Followed every steps, screen is turning on but I do not see anything on it. Any idea what it could be. I plugged and unplugged both wires twice. They are holding tight and the clips are in place.
Maybe I got a bad screen ? Is there a reset on the camera for the screen ?
Thanks for your help
Thank you so much for the video dude! Big help!
so i replaced the screen. before i put everything together i tested it. it worked! great i thought. so i reassembled the camera switched it on and...it doesn't work at all. i can only screen backlight but nothing on the screen. i tried redoing everything, and changing to old screen which kinda worked a little bit and nothing. any advice?
Hey Thanks for the video what's the second screw driver you're using? where can I buy it?
Lastl, mine is Nikon D3200, I guess the replacement process is almost the same, right?
So if the LCD is perfectly fine, but you wanted to replace the transparent back cover... does anyone know if that can just be pried off, or would the entire back cover need to be replaced...?
can you post the link to the replacement screen?
If you have any link pls send me also thanks
Would've been nice if you'd explained that the cover for the SD card needs to be inserted BEFORE re-attaching the back of the camera.
Sorry for missing that detail.
Hi, is it true that nikons require re-programming once a new LCD has been installed? I've heard that the lenses, focus and other inner workings of the camera won't be properly programmed if you do a DIY replacement. Do you know anything about this? What steps did you take right after replacing the LCD to ensure the camera was able to function properly in every way?
Thanks for this Steve - really helpful. The only bit I can't get my head around is reattaching that smaller ribbon wire. It's not really clear from your video how to do that, and as much as I try to push it into the clip, that's just not working. Any additional suggestions? Cheers...
Thanks Steve - that did it. Cheers, Jeremy
Is this replacement screen more HD than the original? I'm looking to buy a higher quality LCD screen.
any advise on how to unscrew worn out screws?
what type of screw did u use to remove the big screw behind the sticker
haven't you found a place to buy the LCD screen online?
At the time I had purchased it from a random Chinese website. I recently looked and couldn't find the link or a link on Amazon.
How was the quality of the replacement screen.
Did it ever break, and for how long did you end up using it?
Cheers! :)
Thanks for the reply.
If the images on the internet are to be believed, those displays are from a Taiwanese company called AU Optics, who actually make fantastic displays and also make them for some quite large companies like Samsung.
Hopefully, I won't run into any issues either.
Sure thing.
I think the display should be here in 2-3 weeks, I'll post what I find out when it gets here.
The screen arrived and I examined and installed it.
It does have the AUO logo on it, however so does the original Nikon screen, but the finishing touches are not the same, which makes me think that AUO does produce displays for Nikon, and is in fact a premium quality Taiwanese brand, but also that the eBay model is a Chinese knock-off that only bears the same logo because of well, obvious attempts at forgery.
Disappointing, but hey, it works. :)
is there way to fix the LCD? camera works perfectly but the screen wont show any image all other functions are working but the LCD only shows only for 0.1 sec then turns black help please
I'm not too familiar with LCD screens. It could be the screen is bad, or it could be whatever controls the screen. If you can find the screen for cheap, it may be worth swapping to see if it solves the issue. You could always try and find a camera repair shop to have them diagnose it as well.
Hi Steve,
Some weeks ago after a trip the screen of my D5300 just don't turn on more. I didn't hit it and dind't crash or something like that. Tbh I've no idea what happened =/. Could you give some tips what can I do for fix it?
Thx in advanced... Btw nice video.
Thx for ur reply... I'll try to fix it according your orientations!
If there is, how much is the price and what specific screw driver used to open the camera?
I didn't purchase it, it was actually a gift. But a small screwdriver like that isn't expensive.
Is this replacement part available here in Abu Dhabi?
I ordered the screen from a random Chinese website when I did this. Looking now, it seems like a few different websites still carry them. The blew screwdriver I used was just a small one from a hardware store. The smaller metal one is from an eye-glass repair kit that you can buy at most pharmacies in the US. Any electronics, or small size screwdriver should do the trick.
Was the screen specificly for the D3100? All I can find are screens for the 32 and 3300 from Halcon on Amazon. Thank you.
Hey Carla, did you have any luck with replacing your screen? I can only find a D3200 screen replacement, wondering if it would fit my D3100. Thanks :)
Is this camera set up similar to the d810?
Where did you purchase your replacement screen?
Hi Steve, I have cracked my rear glass screen (not the LCD) on my D3200 but can't seem to locate where I can purchase the replacement glass, I live in the UK. Are you able to advise of anywhere and do they ship to the UK? Do you have a link? Thanks in advance. Andy (ps: great tutorial)
Thanks Steve, I've searched on eBay UK but they all seem to say LCD replacement, it's just the glass I am after. Nikon have them at a ridiculous price. I'll keep looking. Thanks again
Steve, I think I found it at
m.ebay.co.uk/itm/Nikon-DSLR-D3200-LCD-Display-Screen-External-Glass-Cover-Replacement-Part-NEW-/271889461226?epid=524220411&hash=item3f4ddfefea%3Ag%3ALxgAAOSwpdpVbr5U&_trkparms=pageci%253Ad715a9ff-a5c9-11e7-a6dd-74dbd180e8ec%257Cparentrq%253Ad252d48a15e0ab4549f2397dffff8e44%257Ciid%253A6
Hopefully it's the right one. Many thanks :)
hi? i also have this kind of incident on my Nikon D3100 cam. my grandson took pictures of the group but then he slipped on the ground sending the cam banged at the edge of the cement floor. so that's it for almost a year this happened. it's hard to get contact with an authorized Nikon repairman since I am far from Makati City while our province is in Bohol, Philippines. I've watched your video on how to fix and it inspires me to do it later. my question is what is the name of that replacement parts of the monitor and you bought it at Amazon. I don't know if we have Amazon in our country. and also may i know the price of that replacement part? hope to hear from you more soon..thanks
Thanks for the respoonse Steve..now may i know the price for this screen replacer thing? and we do have EBay in our country but try to look for it there..Salamuch (thanks)..
thanks for replying..happy new year 2017 to you there friend!
OMG! Steve ..am desperately back to talk about that Screen Replacement thing that gives me hard time where to buy this since it's not in our country Philippines & how much is the price. i don't know now what to do. Some parts of the camera are already worn out before my cam can be fixed...the 300mm lens hood no longer used, the viewfinder's covered surroundings detached..hahaha...whatta mess!
You're my only HOPE Steve to have this replacement..I wish you can help me find the exact info on how, where & how much is this thing.
How much does a replacement lcd screen cost?
Hi steve. Is the process same for nikon D300?
It probably won't be exactly the same, but similar since they're both Nikon DSLR cameras. I don't have any experience with the D300 to tell you exact differences.
Ok. Thanks for your reply.
Como faço pra comprar uma tela dessa?
]
eBay might be a good place to check! I can't find the website I bought mine from.
Excellent video, here in 2023 it seems almost impossible to find a store with such d3100 LCDs...not even in China´s shops, any hint will be welcome! mine is broken.I have found second-hand ones but too costly. Help needed!!!
Thank you! I was actually searching last week so I could put a link in the description. I didn't find anything on Amazon or any other well known site. Maybe eBay or local sale pages (fb, craigslist, etc) for a used screen or parts camera is the best option?
@@StevesGarage me either unfortunately.
I have found spare parts in some service shops but sellers are aware these LCDs disappeared from market and cast prices over them.. Even being a second hand part.
@@edsonfcordeaca4958 That figures that they're charging a premium for them. It's been a bit since I've searched, but it seems like they disappeared overnight.
where i can buy a lcd?
and how much it cost?
I bought it from a random overseas website years ago. I don't remember where I got it from and how much it cost, I'm sorry.
I did this and now my live view mode. Button won't work.
Now my camera won't even turn on
How much was the screen?
Bro my buttons won't work what do I do to make it alright? Asking for the same model.
Not exactly sure what could be wrong to cause the buttons to not function. Did you drop it, expose it to water, or dirt? Taking it apart to see if something is lodged in there, or if there's a wiring problem wouldn't be a bad idea. Let me know how else I can help.
@@StevesGarage no I didn't drop it or expose it to water however I live in Pakistan and it's very dusty here. I bought it in 2015 and it was a used cam, play button used to misbehave but others were fine. Now others wouldn't work too.
I don't have enough experience with it to know if it's sensitive to dust or not. If it were my camera I'd take it apart to inspect it and see if the issue is visible like a problem with the button itself, or something deeper like a failed electrical connection.
@@StevesGarage thank you so much. I'll get it checked by a professional.
Alright, let me know how you make out!
nikon d3100 disply price?
I got mine real cheap off Amazon. I want to say it was $13, but that was a few years ago now, so I'm not sure the current cost.
where can i buy the screen?
+Erik Olivares I bought it from Amazon if I remember correctly, but they were offered from a lot of places. I just replaced it with the cheapest one I was able to find. I do remember that it took forever to arrive because it came from China. Unfortunately I no longer own the camera, so I can't get the name of the screen I bought. Let me know if you have any other questions!
Steve's Garage today I just bought the screen for 25€, it was so cheap. I bought it in Aliexpress. Is easy to replace the screen?
+Erik Olivares Yes it's easy to replace the screen. Once you remove all the screws around the body so the trim comes off, the screen is right there. The video is pretty detailed and can help you locate all the screws. Let me know if you have any more questions!
can anyone help me get this Nikon D3100 LCD Screen Replacement? i want to have this but i don't know where to buy since I don't know if this is available in our country Philippines. Am willing to pay thru Western Union but on our own currency valued as US$...You can reach thru this channel of mine..hopelessly for 2 yrs now, dreaming of buying this.
how about buying it for me? hehehe..and i will send to you directly my money? if youhave TRUST in me..i'm 24/7 on my Facebook just in case you've being fooled by me..ok?
i've found but this is what i've read: lcd4laptop
LCD Screen Display Monitor Repair Part Replacement for Nikon DSLR D3100
5.0 out of 5 stars 1 customer review
Price: $39.99 + $4.99 shipping
Only 2 left in stock - order soon.
This item does not ship to Philippines. Please check other sellers who may ship internationally.
Ships from and sold by Halcon.
Now my D3100 wont autofocus.
You didn't hit the manual focus button or something silly like that right? Replacing the screen is nowhere near the autofocus items, so I'm not sure what could have went wrong. It could also be a lens problem. I haven'y had any autofocus issues, and you don't provide much detail so I'm not sure how to help you.
I'm sure I didn't do nothing wrong. It was working right before I replaced the LCD, everything worked great. Then the autofocus doesn't work, the motor doesn't work but the infrared light turns on. I googled and found out that a firmware update will fix it. I'll give it a try.
+Fazal Fariz hopefully that worked out? I don't have a 3100 anymore, so I can't do any testing myself.
I just updated the latest firmware and it didn't help. The autofocus motor doesn't start, no matter what setting I'm in. I did the basics, cleaning the mirror, the autofocus sensors, bla bla and what not. It was working right before I replaced the LCD, I might've messed something up. I've no idea how to fix it.
+Fazal Fariz I'm not sure how the LCD screen is related to the autofocus, so it's tough for me to help diagnose what could have happened during the screen replacement. It might be worth bringing to a professional to have them check it out. Good luck and let me know if there is anything else I can do.