As usual, Ben is just out here saving the world. Well atleast the DPS6 world. Thanks Ben!
Very helpful. I smooshed the input sensor B wires and exposed the conductors trying to get the trans back in place. I found a replacement pigtail right away once you mentioned the ABS pigtail is the same.
Thank you so much for your help Ben. just to make doubly sure all three sensors have a spacer on them or only the top two.? Thank you!
@@BigBensCarsAndCycles bro that is the best news anyone has given me in my whole life almost.
Love it, it's already been out for the clutch update in the past and what do you know, she's out again 😃
Excellent videos. Thank you😊
Hey Ben, big fan of your videos I actually recently did the clutch/fork replacement on my ford focus 2013 thanks to your tutorials I put everything back but the car won’t start I put the scanner in to it to do the adaptive learning and I get a range sensor code do you think thats the reason for the car not starting I also noticed that on the scanner I can see that it says it’s on drive when it’s really on park I’m thinking of replacing the range sensor but I thought I’d run it by you thanks again
@@LuisGarcia-pr3rv hi, glad the the videos helped. I would make sure you reattached the shifter cable to the transmission
@@BigBensCarsAndCycles that is the first thing I checked when i noticed it was not working I get a lot of different range sensor codes like P0707,P2801,P2802,P2803 I just hope it’s not tcm related
I just read online that if you have an automatic transmission dual clutch and your replacing the actuators that the tcm needs to be re-learned or reprogrammed with an high end scan tool or thru the ford dealer is this true? That's probably why the actuators were not were not working correctly?
@@michaelbarela2733 hi, replacing the 2 actuators does not require anything after
Great job ben! Just wondering if i have a error code P1934 Engine Control Unit - Vehicle Speed Signal, can i solve the error just by replacing the input speed sensor A (the grey one). I have other codes about ABS U3000(48), but i just want to leave it by when i have the funds to replace/fix the ABS. Thankyou!
@risuchannel8115 hi, glad the videos helped. I would look for a damaged OSS or OSS wiring. If that looks OK, I'd monitor signals for OSS, rf wheel speed and left front wheel speed while driving
Hey Ben, you have been really helpful with the problems I have been having with my ford focus. I am in the middle of replacing my neutral safety switch and I am having trouble getting the connector off and I don’t want to break it. Could you please explain how it’s supposed to come off? It would be greatly appreciated
I'm glad the videos helped. There's a lock you have to slide up. Then the connector has a release button and comes up
Is normal when the car is reversing, there is a clicking sound. I don't know if its the tcm. Thank you
Thanks has help on my sho
Recently I found your video and very instructive.
I have ford focus 2014 but it's giving me hard time with the ABS light, traction control and speedometer doesn't work.
I changed all the wheels sensor already.
Front right wheel sensor is not reading, besides that ANY advice.
Thank you 👍 👍👍👍 Good day
@@ismaelalvarado706 hi! Check for damaged wires by the abs module behind the battery tray
I broke sensor a removing transmission luckily I was able to find the problem as it was letting me program it in forscan fixed it and running great still!
Hi BigBen thanks for sharing this video. My 2010 ford fiesta 1.6 T giving me lot of issues with the transmission malfunction message. I went to a dealer service and after diagnose they informed TCM module need replace. The next day when i went to replace the part they informed the ABS also need replace. I feel something wrong and i didnt replace anything after seeing the cost of both module arround 1500$ Still the car is running and speedo Audo meter not working. Some time the car show the message transmission malfunction service now!!! Can you advise me any other reason for this issue or I need to replace the TCM and ABS?
@@BigBensCarsAndCycles There are a bunch of codes as below
P0507: 27-24
U2005: 86-EC
1934: 86-EC
U0001: 88-2E
U0121: 87-2F
U0101: 00 - AE
P060A: 47-AF
P0072: 94-AE
I did a 150k service in another dealer center last week and after diagnose they repeated the same to change the ABS module. Now after service the engine malfunction also showing and dealer saying it all because of ABS module. They said I can use the car but ABS will not work.
Good evening sir, I have a question which signal use de instrumental cluster for vehícle speed ? The oss sensor or the wheel speed sensor ?
Big Ben I replaced both oem actuators and it made my shifting worse and the performance worse my speedometer wasn't working and my dash started acting up, I had to take them back out and put the old ones back In, when I took it for a test drive I decided to just step on the gas pedal and see what happens with the old actuators the rpms still hit 2500 almost 3000 in 1st and 2nd and 3rd gear, this is an automatic transmission, I ordered an output shaft speed sensor I'll see if that fixes the problem, next step would probably be to replace the TCM, any suggestions?
@michaelbarela2733 hi, what fault codes are present? And yeah since your speed wasn't showing that may be the problem
@@BigBensCarsAndCycles no codes are showing, my speedometer works just fine now with the old actuators put back in, I'll wait until I get the output shaft speed sensor installed and see what happens probably nothing lol, I don't think it's normal for a car to hit 2500 or 3000 rpms In 1st 2nd, 3rd gear is it? Can a bad tcm cause that to happen? Will PID read the tcm ?
@michaelbarela2733 I'd drive it until it sets a code. If you full throttle it while it's acting strange that can help set a code faster
Can I reline the stud in the flywheel after the transmission is in ?
No, it needs to be pulled back. But I haven't found indexing to be a problem
Hi Ben, somehow I lost the third speed sensor spacer. Where do I get a new one?
hey love the great work you'r doing, im kinda suck right now but have you ever deal with a 2014 focus with a code p2837?
Hi, glad to help. If that's your only code (and you dont have P287B) then its probably a bad tcm
@@BigBensCarsAndCycles yes i do see a p287B , the car can drive in forward but the reverse isn't taking along with the second gear. the clutch was updated because i saw a sticker on the transmission stated. any advice on how i can check to fix this please . thank you so much in advance watching your videos give me a sense of relief
Excellent mate !
Do you have a link or a part code for the input speed sensors A/B?
If I'm not showing any codes can a faulty output shaft speed sensor cause poor acceleration with high rpms?
@@michaelbarela2733 maybe. Check the pids on the scan tool for signal drops or spikes
I have a cheap cable obd2 I don't believe I have options for PID, would you happen to know if cheap obd2 scanners have options for pid, I might have to invest in a better obd2 or a wireless wifi obd2
@michaelbarela2733 forscan is a good option, you need a laptop interface for 30 bucks
hey ben: i recently rebuilt my 6f35 and got it working great, for a few hundred miles. i have a bearing that goes between the 3-5-reverse and the case. the one at the bottom that surrounds the ring tower. do you know the name of this bearing? i found a kit, but i really just want the one bearing and dont know what its called so i cant find it anywhere. anything helps. thanks
Direct/od to case thrust bearing. It'll be obvious it's the only one with black on one side
Is it normal for the transmission to shudder and vibrate hard?
@@BigBensCarsAndCycles but it only does it when is in idle also I get that code that says transmission fault service now
@andresquinonezramirez9373 OK that's not normal. Gotta diagnose the code
@@BigBensCarsAndCycles ok let me tell you the car drives fine and also I have no check engine light on like if something is wrong with the transmission like you would usually get from a faulty A or B Fork or actuator
Hi
All your videos are extremely helpful and very well done . Much appreciate all you do for us ford owners .