I Mastered Shed Expansion in Just 1 Hour and You Can Too

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ •

  • @riverfrontww
    @riverfrontww Місяць тому +27

    Probably could make some awnings of those cutouts to minimize the sun/heat coming in the widows but not obstruct the view much at all

    • @DoinStuff
      @DoinStuff  Місяць тому +3

      Great idea, thanks for that 👍

    • @justinanderson1727
      @justinanderson1727 Місяць тому

      Absolutely best use

    • @marlysjcollins8775
      @marlysjcollins8775 24 дні тому +1

      Came here to suggest the same!

    • @kieranp4617
      @kieranp4617 23 дні тому

      Came to suggest the same too haha. If you make them L shaped then they has a vertical support and can shade from one side too.

    • @shawnk7084
      @shawnk7084 22 дні тому

      Window awnings for sure...but the bridge idea sounds pretty cool too.

  • @pjdambra
    @pjdambra Місяць тому +5

    Picking that floor out with your mini-excavator was some very impressive operating skills. Great Welding skills also. Love watching your work habits. Keep on Doin Stuff.

    • @DoinStuff
      @DoinStuff  Місяць тому

      Thanks mate, glad you're enjoying it! 😎

  • @explrn_dwnundr5007
    @explrn_dwnundr5007 19 днів тому +2

    Love ya work that door turned out sick so did the windows 👌🏾😍, you should just paint that black ply around the door green.

    • @DoinStuff
      @DoinStuff  19 днів тому

      Thanks for the ideas 👍

  • @jonsingleton4247
    @jonsingleton4247 Місяць тому +5

    The cutoff metal can be used over your windows as an awning or if you put in a man door, an awning over it. Also if you need to reinforce any areas, you have the perfect patch! Enjoying from California's Gold Country, U.S.A.!

    • @DoinStuff
      @DoinStuff  Місяць тому +1

      Yes, very good idea, thanks! I'm liking the awning over the man door. 😎

  • @kymmarshall1116
    @kymmarshall1116 Місяць тому +2

    Liking this type of content. No stuffing around and in to it .👍🏾🇦🇺

    • @DoinStuff
      @DoinStuff  Місяць тому

      Thanks for that 👍

  • @MrBLUEDEVILUK
    @MrBLUEDEVILUK 17 днів тому +1

    I’ve just found your channel. Your building technique is much like my late grandfather’s. Use what ya got. Mend and reuse. I love it!

    • @DoinStuff
      @DoinStuff  17 днів тому

      Aww, thank you. I'm glad that you liked it 👌

  • @davejack8973
    @davejack8973 10 днів тому +1

    the concrete is used as a counter balance to make them more steady on railways . love the vid M8
    here from Canada ! woot! some beautiful country there

  • @Yutani_Crayven
    @Yutani_Crayven Місяць тому +4

    That window fit is so satisfying…

  • @letspodcast756
    @letspodcast756 23 дні тому +1

    greetings from siberia! thants for the intresting video , it's nice to watch a man who does what he likes👍

    • @letspodcast756
      @letspodcast756 23 дні тому

      these containers would make a great mini house with a rood terrace on another container

    • @DoinStuff
      @DoinStuff  23 дні тому

      Thanks! I'm glad you enjoyed it. 👍

  • @allister87
    @allister87 27 днів тому +2

    Great video, looking forward to the next one. Personally, I think a Perspex/engineered glass floor insert would have been cool on cantilever container!

    • @DoinStuff
      @DoinStuff  27 днів тому

      I'm not sure I'd want a glass floor but thanks for the idea! 😉

  • @Huzzahgamers_inc
    @Huzzahgamers_inc 23 дні тому +2

    In reference to @ 41:10 Use the shipping container scrap to make window shades/awnings. The kind that over hang and block the direct sunlight and rain. maybe a 25 degree angle? they are the right size and would need very little extra support. Also You gained a Subscriber. I really enjoy these type of videos, They kinda remind me of Farmcraft101 and his videos. Well done. Little bit of criticism Your music is a bit louder than it should be to be honest. It comes in rather loud from a relatively lower volume when you're talking. I hope you don't mind me saying that, and other than the volume of the music vs the speech I found the video nicely rounded. Maybe use a bit more time lapses and you will have a real banger of a format!

  • @RobertCbrfsprintsti
    @RobertCbrfsprintsti 28 днів тому +2

    I’d use the off cuts on top of container creating a seating area for an evening beer enjoying the views you have 👍

  • @mechanicalman4531
    @mechanicalman4531 Місяць тому +7

    nice, i wish you were my dad and showed me how to do stuff

    • @DoinStuff
      @DoinStuff  Місяць тому +8

      Thanks mate, my dad didn't show me how to do this. I just tried it for myself and never gave up 😎

  • @jamiemarsden2557
    @jamiemarsden2557 Місяць тому +2

    Great video so far, with those cut outs. You could make some raised garden beds would be nice simple use.

    • @DoinStuff
      @DoinStuff  Місяць тому +1

      Hmmm not really a gardener, but I appreciate the idea. 😉

  • @patricknorthey3748
    @patricknorthey3748 Місяць тому +3

    I love the setup! Use of terrain is awesome!
    The off cut metals, you could make a door insert from it?
    Potentially a little awning over the back windows set in a tube frame...

    • @DoinStuff
      @DoinStuff  Місяць тому

      I love that idea, great thinking 👍

  • @RickTizzy
    @RickTizzy 20 днів тому

    Just a comment to show appreciation and support for the hard work!

    • @DoinStuff
      @DoinStuff  20 днів тому

      Thanks mate for that 👍 appreciate it 😎

  • @tanyiabailey4792
    @tanyiabailey4792 Місяць тому +3

    the left over bits are good for patches if you need to repair the containers for rust or anything else look forward to seeing it finished

    • @DoinStuff
      @DoinStuff  Місяць тому

      Yeah I was thinking the same thing.👍

  • @debbymullies8381
    @debbymullies8381 23 дні тому +1

    What a fun video to watch!! They turned out great and I like the shade of green you selected!! I am enjoying watching all the different ways people are being creative with these shipping containers. Also I am jealous because I would love to have a spray gun that works as well as yours did!! I have tried and tried and they just never work!!! 🥺

    • @DoinStuff
      @DoinStuff  23 дні тому

      Thanks for watching, I think green is the perfect color for the shed too!

  • @jeffjones4006
    @jeffjones4006 23 дні тому +1

    Great execution of your idea. Very well planned out great work.

    • @DoinStuff
      @DoinStuff  23 дні тому

      Thanks! Glad you liked it! 👍

  • @bobbruin44
    @bobbruin44 Місяць тому +1

    Good luck with your channel. Good work. Watching for the first time.

    • @DoinStuff
      @DoinStuff  Місяць тому

      Thanks, glad you're here!

  • @jackdumas9563
    @jackdumas9563 27 днів тому +1

    Just joined, take the piece you cut out and make an Awning for that window. Yes it’s only 1/2 the size of that cutout- but on the end cut another piece about a foot and angle it just slightly- make the frame from old bed frames. Everyone just throws them away. That Metal is some Strong Metal. Anyway you asked what to do with those pieces- and that’s what I would do - my wife would be happier- and Me, well - eww lala - haha-

    • @DoinStuff
      @DoinStuff  27 днів тому

      Thanks for that, good thinking 🤔

  • @kiwicameraman
    @kiwicameraman Місяць тому +2

    Getting good views on this 1 Jim. We'll done mate awesome vid 👌

    • @DoinStuff
      @DoinStuff  Місяць тому

      Oh Yeah, loving it. 😎

  • @TheOldaz1
    @TheOldaz1 Місяць тому +1

    Good and servicable, well done.

    • @DoinStuff
      @DoinStuff  Місяць тому

      Thanks for that.👍

  • @jayson0987
    @jayson0987 19 днів тому +1

    use of cuts for window awnings or external door entries as mini awnings? just a thought,
    or rain deflectors for the point where you are attaching the containers to the existing building.

    • @DoinStuff
      @DoinStuff  19 днів тому +1

      I like that, good thinking! 🤔

  • @TheRuralProject
    @TheRuralProject 9 днів тому +1

    Another great video mate. Really enjoying this build. Chris TRP

  • @edwardseth1230
    @edwardseth1230 26 днів тому +1

    use the steel container sheets.. look out the window.. there is a small gap between the I-Beam legs n the other container... plus you can make a awning above the windows.. n rain not falling on top of the windows. you can also fill the hole with the same material...add some electrical outlets inside... for a fan or lights or just use them as extension when working inside.

    • @DoinStuff
      @DoinStuff  26 днів тому

      Good ideas! Thanks for the input.

  • @BrandonNapier
    @BrandonNapier 17 днів тому +1

    use them to make a retaining wall. Your property has a lot of elevation change, im sure there is an area where you could create a small retaining wall to get more space and it would look good.

    • @DoinStuff
      @DoinStuff  16 днів тому

      Thanks for the idea, I'm not sure if I'll have enough left over but it's worth considering 🤔

  • @Hacksaw37
    @Hacksaw37 Місяць тому +1

    Always handy to have a gate lying around those window cut outs will come in handy for that. Horses run along way so maybe Phar lap would be a good name. 🤔🤔

  • @VanDeanCustoms
    @VanDeanCustoms 10 днів тому +1

    With a couple of posts, you could use the leftover cutouts as a quick retaining wall.

    • @DoinStuff
      @DoinStuff  9 днів тому +1

      I like your thinking 👍

  • @magy1777
    @magy1777 Місяць тому +2

    Use your steel cut outs to make awnings for your window. Stops sun shining in, still heaps of light and keeps rain out when I forget to close the window.

    • @DoinStuff
      @DoinStuff  Місяць тому

      I like that thinking 👍

  • @RustysMetalCutSignsDesigns
    @RustysMetalCutSignsDesigns Місяць тому +1

    Another great video, Jim. If only it did take 1 hour....my recent shed extension took 1 hour + about 10 days of hard slog. You look like you have so much storage now, you will never fill it....BUT, I reckon you will fill those containers, then go looking for more!!

    • @DoinStuff
      @DoinStuff  Місяць тому

      Thanks, I think you might be right about that. 👍

  • @raytalbot5890
    @raytalbot5890 Місяць тому +2

    Put an edge on the end of the sea can so the rain won’t go thru between? Make a cap to go along the sea can where they but up to stop rain ?? Make a porch along the edges where you dug out to get under to direct rain ? Or make a small wall under the sea can to make a small storage?? Maybe you could have put the door up side down??? 👍👍🇬🇧🇬🇧

    • @DoinStuff
      @DoinStuff  Місяць тому

      Thanks for all those ideas, much appreciated. 😀

  • @jenniferwhite6089
    @jenniferwhite6089 29 днів тому +1

    was a company here that put silt for the parking lots in the cans for the winter they did that to there cans when the break throw the floors concrete them

  • @Samboslice1
    @Samboslice1 18 днів тому +1

    Nice job! Loved the vid

    • @DoinStuff
      @DoinStuff  17 днів тому

      Thanks, glad you enjoyed it! 👍

  • @deanedeane4318
    @deanedeane4318 29 днів тому +1

    Great job Dude ! .... just a thought with the left over container wall bits , might be enough left for a retainer wall under the two 40 footers from ground height ?♥️😉🙃😎 NZ

    • @DoinStuff
      @DoinStuff  28 днів тому

      Good tip!, thanks 👍

  • @brodierip
    @brodierip 29 днів тому +1

    That’s a handy way todo it

  • @jimd421
    @jimd421 6 годин тому

    What a excellent vi really appreciate seeing it. I just hate snakes and mice like everybody else.

  • @DFaulkner0
    @DFaulkner0 Місяць тому +1

    You could use cut out pieces to make a awning for the windows! Putting a roof on the containers will stop standing water from rusting the roof out and help keep them cooler.

    • @DoinStuff
      @DoinStuff  29 днів тому

      Good Ideas, thanks 👍

  • @surftrekkers
    @surftrekkers Місяць тому +1

    Scraps I've seen welded into raised garden beds using rubber hose along the top edge as a safety bump.

  • @jackcoats4146
    @jackcoats4146 Місяць тому +1

    Use the steel as awnings over the windows. Keep some heat out while light/breeze can come in.

    • @DoinStuff
      @DoinStuff  Місяць тому

      Thanks for that, great idea! 😎

  • @BrentJones-x4c
    @BrentJones-x4c 25 днів тому +2

    Sun shades for the windows

    • @DoinStuff
      @DoinStuff  25 днів тому +1

      Nice, thanks for that 👍

    • @BrentJones-x4c
      @BrentJones-x4c 22 дні тому

      @ your welcome if you rebate the profile and hinge the top profile it can also be used as a bad weather shutters

  • @kristenwill57
    @kristenwill57 Місяць тому +2

    You could use the metal walls leftover as a roof between the shed

  • @jaycrank8163
    @jaycrank8163 18 днів тому +1

    You can put them over the windows to give shade and reduce the amount of water hitting your windows.

    • @DoinStuff
      @DoinStuff  17 днів тому

      Great idea, thanks for that 👍

  • @ronniebryant1152
    @ronniebryant1152 Місяць тому +1

    U can use thoes extra pieces as skirting for your little container or as patches for the holes and you should put a porch on top of that other container with a door and lil bridge

  • @Melicoy
    @Melicoy Місяць тому +1

    Do you need side to side gussets?
    Actually if they drove a machine in they would stop at the first dmg. They dragged something out
    Looking really good. Please come to Canada and give me a hand lol
    Can you put the door in backwards and swing out? Much easier

    • @DoinStuff
      @DoinStuff  Місяць тому

      I currently don't have a passport 🙃 thanks for the offer though 😏

  • @jamiesullivan8900
    @jamiesullivan8900 23 дні тому +1

    Extremely interesting
    Do you think you should have purchased A grade instead of stuffing around?
    I'm going to do the same thing at my block but don't want the stuffing around

    • @DoinStuff
      @DoinStuff  23 дні тому

      I have the materials, skills and time to do this at a lower cost for me, It's not for the faint hearted. Good luck with your build 👍

  • @Yutani_Crayven
    @Yutani_Crayven Місяць тому +1

    28:09 Path of Destruction is such a metal band name type of phrase

  • @gacattack1234
    @gacattack1234 27 днів тому +2

    Are you sure it wont collapse. You are supposed to bang it and say that ain't going anywhere for confirmation. Nice solution for your property. Pipe is measured on inside, tube is measured on outside. Leftover steel could used for a Raised garden bed, with some rust proofing.

    • @DoinStuff
      @DoinStuff  27 днів тому

      Thanks for that info and ideas 👍 appreciate it.

  • @Ana-xz2mm
    @Ana-xz2mm Місяць тому +1

    Hi Jim, Im from WA. Can the door go in upside down

    • @DoinStuff
      @DoinStuff  Місяць тому

      I had thought of that but the way the door frame is made the way it is. If it was just a door without a frame it would wrk . Thanks for the idea 👍

  • @australiaandphilippineslif8739
    @australiaandphilippineslif8739 28 днів тому +1

    Easy way to remove the floor is to use a hole saw over the bolts....work well and is quick...then just hit the bolts off with your hammer..👍

    • @DoinStuff
      @DoinStuff  28 днів тому

      Thanks for that, I'll give that a go on the next one! 👍

  • @jemmons6654
    @jemmons6654 Місяць тому +1

    you should see if the cut off metal fits between the end where the windows are and that other container dawn below

    • @DoinStuff
      @DoinStuff  Місяць тому +1

      Sort of like a bridge between the 2?
      I like that idea.

  • @peterbrain-y1s
    @peterbrain-y1s Місяць тому +1

    Use the left over sheets and make window ornings

    • @DoinStuff
      @DoinStuff  Місяць тому +1

      That's brilliant, I like that idea.

  • @MaxMustermann-qd6fs
    @MaxMustermann-qd6fs 29 днів тому +1

    Super

  • @r.ccustomtruckingsydneyaus4632
    @r.ccustomtruckingsydneyaus4632 20 днів тому +1

    Id chuck some stairs up side the container keep that view ahy.

    • @DoinStuff
      @DoinStuff  20 днів тому

      I like your thinking, stay tuned... 😎

  • @soaringeaglesavage887
    @soaringeaglesavage887 Місяць тому +1

    Use left over metal for shade block

  • @hafizuddinbinhanafi3780
    @hafizuddinbinhanafi3780 20 днів тому +1

    Maybe rotate the door so it become left swing? Might need new lock for that.

    • @DoinStuff
      @DoinStuff  20 днів тому

      Thanks for your thoughts 👍

  • @SteveG001
    @SteveG001 Місяць тому

    great vid looking forwrd to seeing more

    • @DoinStuff
      @DoinStuff  Місяць тому

      Thanks for that 👍

  • @leec2106
    @leec2106 17 днів тому +1

    How about an Awning out over the windows to keep the sun down a bit.

    • @DoinStuff
      @DoinStuff  17 днів тому

      Thanks for that, good idea 👍

  • @bubbanater1984
    @bubbanater1984 Місяць тому +1

    I used my cut outs for over hangs over the windows

  • @randogame4438
    @randogame4438 28 днів тому +1

    Cut the left over peaces and make above ground planters.

    • @DoinStuff
      @DoinStuff  28 днів тому

      I'm not much of a gardener but thanks for the thought 👍

  • @donaldmendes184
    @donaldmendes184 27 днів тому +1

    Being your on hill side, use leftover metal from container to build wall for plants , concrete work for sidewalks, 😅

    • @DoinStuff
      @DoinStuff  27 днів тому

      Thanks for that, I'm not much of a gardener. 😉 I like the other idea though 👍

  • @r.ccustomtruckingsydneyaus4632
    @r.ccustomtruckingsydneyaus4632 20 днів тому +1

    Make garden beds outa the left over bits of steel. Make 2 boxes compost bins mulch. Your on land. Veggie patch ahy.

    • @DoinStuff
      @DoinStuff  20 днів тому

      Thanks! I'm not much of a gardener though 😅

  • @MrXboatx
    @MrXboatx Місяць тому +1

    retaining wall from the offcuts

  • @jamesruan913
    @jamesruan913 25 днів тому +1

    The Used the shipping container metal if you’ve more than four ,raised veg or flower beds

    • @DoinStuff
      @DoinStuff  25 днів тому

      Nice, but I'm not much of a gardener 🤣 thanks anyway 👍

    • @jamesruan913
      @jamesruan913 25 днів тому

      Then a canopy over the smoking shelter lol 😝

  • @noah786
    @noah786 24 дні тому +1

    Raised planter bed

  • @garyhaines6632
    @garyhaines6632 20 днів тому +1

    Take your circular saw and set the depth so you can only cut 4.mm hold fennce up and just cut back and forth to make a little ramp (problem solved )

  • @cynzhero62
    @cynzhero62 17 днів тому

    Is it a " saw " or a " sore " or a " soar " ?.

  • @andrewhopkins2529
    @andrewhopkins2529 21 день тому +1

    Raised garden beds

  • @Z1MWOODS
    @Z1MWOODS 24 дні тому +1

    Make pool or small spa.

    • @DoinStuff
      @DoinStuff  24 дні тому

      I like that idea 😏👍

  • @Kingofthecountry7484
    @Kingofthecountry7484 24 дні тому +1

    Could have taken a grinder and knocked the edges off of it to where you could have rolled wrote it smooth and stuff for the road smooth right over top of it

  • @icepick1945
    @icepick1945 26 днів тому +1

    If you place work benches over the taller ply floor, or fixed shelving your laughing, oops guess not Now all you need to do is take some of the wall out between the 2 containers??

  • @bennym1956
    @bennym1956 Місяць тому

    I Mastered Shed Expansion in Just 1 Hour. 😅🤣🤣🤣😂😂😂🤨🤨🤔🙄😱 I think you spent over a hour on the footings part alone. I love titles like this, so unbelieveable.....😋🤬

    • @DoinStuff
      @DoinStuff  Місяць тому

      The video went for an hour....
      But you watched it right....😆

  • @kingtut5923
    @kingtut5923 21 день тому +1

    It took longer to move all the stuff in.

  • @MrJFoster1984
    @MrJFoster1984 5 годин тому

    Security window shutters

  • @johnainsworth6944
    @johnainsworth6944 Місяць тому +1

    Garden beds

    • @DoinStuff
      @DoinStuff  Місяць тому

      Mmmmm I'm not much of a gardener 🤣 thanks for that though.

  • @orjiiseh-ntah7697
    @orjiiseh-ntah7697 Місяць тому

    I mastered "Domain Expansion"

  • @Admirablevirus
    @Admirablevirus 5 днів тому

    Spray gun and no mask god damn

    • @DoinStuff
      @DoinStuff  5 днів тому

      Thanks for your input 👍

  • @jamiesullivan8900
    @jamiesullivan8900 23 дні тому

    50x50 shs "square hollow section '"
    Not rhs!

    • @DoinStuff
      @DoinStuff  23 дні тому

      "Rolled Hollow section" is what I've been told by the supplier. Anyone can call it different if they want to.