I seen THE HAMMER HEAD on Cycle Fantastic is putting some on his motorcycle I am going to Watch and see How they look And made in the USA is awesome ❤️🇺🇸💙 Love from Mississippi USA 🇺🇸
what is the pullback and width on these bars compared to the stock handlebars to a 2019 road glide special? I love the look of these bars and that they stand out more in the sea of ape hangers, but concerned about comfort. I have broad shoulders.. would these style bars be a mistake if I'm comfortable with the width of stock bars? Thanks in advance!
So I really want these bars. Love the look and everyone has apes so want to be a little different. I was thinking 14 inch for my 22 cvo roadglide. My roadking has 14 inch yaffee monkey bars and is really comfortable. Can I get the comfort of all day riding with these like my yaffee’s?
@@l.a.choppers6834 Thanks for the reply. 1 more question. What size would you suggest? Stick with 14's? I'm 5'11 and the 14 inch yaffee are comfortable and even thought i should have went 16. I've been told that 14 might not feel the same for these hammerheads and might want to to consider 12 and put a riser if they're 2 low. Thoughts or suggestions?
What are the extra clamps for??? is this if you have a smaller original bar than 2015?? The 2 extra clamps almost look like they belong on the controls/??? I didnt use them and everything worked ok on my 2021...I would also add that 14 inch and up will need new clutch and brake cables....and the control cables needed to be extended even on the 12's for a 2021
@@l.a.choppers6834 They are AWESOME bars!! Love them so far! yeah, I kind of assumed that you guys hadnt tried them on a 2021 yet...they fit great but only 12s wont need cables...any taller and they should probably get new clutch and brake cables...at least I couldnt find a way to add anymore length... :D
@@likebikes302 Mine were installed on a 2021....I used extensions...but you may be able to do it without them...it will be tight though....on Hammerhead 12's
@@Dude_wheres_my_bike I dont think they meant 2021...as I jsut installed the 12's and they barely fit....no way I would do 14's on a 2021 unless you can extend all the cables...
@@redrider0151 spoke to a harley tech on reddit and was able to figure it out ..got 14" to fit with no cable change. Just have to cut the zipties and re organize the area under the speedo cluster. If you care to see my ig is under @big_blue_dyna..the vars look great
@@Dude_wheres_my_bike Ill have to dig in again....I tried finding any zip ties under mine and couldnt find a way to get anymore slack. I even took the mount with all the control wire connections out of its holder to move it around too....I mean mine are on there but if I can get anymore slack it would be great! Love your color on your RG...2 tone red and black is awesome!
@@Dude_wheres_my_bike Was the cable tie up underneath the clamp where the brake line is routed up under there???? I ripped mine all apart again to see if I could add just a tiny bit more slack...I cant see underneath but I am thinking thats where its at....
I seen THE HAMMER HEAD on
Cycle
Fantastic is putting some on his motorcycle
I am going to Watch and see How they look
And made in the USA is awesome ❤️🇺🇸💙
Love from Mississippi USA 🇺🇸
Dumb question...will they work on a 2015 Breakout?
F*ck yeah!! I love mine! Went with the 16s just installed less than a week ago and they’re bada**
I have a 2022 Road Glide ST, I ordered the 12” HammerHead bars. Will there be any binding issues with using the stock clutch cable?
what is the pullback and width on these bars compared to the stock handlebars to a 2019 road glide special? I love the look of these bars and that they stand out more in the sea of ape hangers, but concerned about comfort. I have broad shoulders.. would these style bars be a mistake if I'm comfortable with the width of stock bars? Thanks in advance!
Are you guys shipping to Australia?
Do you need to extend the wires and cables with the 12" bars on a 2020 road glide?
Will these fit on a 22 cvo fltrxse
Do you have them in stock . 12”
Deg. Angle of the grips please?
So I really want these bars. Love the look and everyone has apes so want to be a little different. I was thinking 14 inch for my 22 cvo roadglide. My roadking has 14 inch yaffee monkey bars and is really comfortable. Can I get the comfort of all day riding with these like my yaffee’s?
@@l.a.choppers6834 Thanks for the reply. 1 more question. What size would you suggest? Stick with 14's? I'm 5'11 and the 14 inch yaffee are comfortable and even thought i should have went 16. I've been told that 14 might not feel the same for these hammerheads and might want to to consider 12 and put a riser if they're 2 low. Thoughts or suggestions?
Why wont these fit a street glide?
What are the extra clamps for??? is this if you have a smaller original bar than 2015?? The 2 extra clamps almost look like they belong on the controls/??? I didnt use them and everything worked ok on my 2021...I would also add that 14 inch and up will need new clutch and brake cables....and the control cables needed to be extended even on the 12's for a 2021
@@l.a.choppers6834 They are AWESOME bars!! Love them so far! yeah, I kind of assumed that you guys hadnt tried them on a 2021 yet...they fit great but only 12s wont need cables...any taller and they should probably get new clutch and brake cables...at least I couldnt find a way to add anymore length... :D
Have you guys had a chance to install on a 21-22 roadglide to confirm install without extensions?
@@likebikes302 Mine were installed on a 2021....I used extensions...but you may be able to do it without them...it will be tight though....on Hammerhead 12's
Do you need to extend the cables with the 14”
I just tried on my 2021 road glide and the clutch perch and brake perch are too short for 14" is there something I'm missing?
@@Dude_wheres_my_bike I dont think they meant 2021...as I jsut installed the 12's and they barely fit....no way I would do 14's on a 2021 unless you can extend all the cables...
@@redrider0151 spoke to a harley tech on reddit and was able to figure it out ..got 14" to fit with no cable change. Just have to cut the zipties and re organize the area under the speedo cluster. If you care to see my ig is under @big_blue_dyna..the vars look great
@@Dude_wheres_my_bike Ill have to dig in again....I tried finding any zip ties under mine and couldnt find a way to get anymore slack. I even took the mount with all the control wire connections out of its holder to move it around too....I mean mine are on there but if I can get anymore slack it would be great! Love your color on your RG...2 tone red and black is awesome!
@@Dude_wheres_my_bike Was the cable tie up underneath the clamp where the brake line is routed up under there???? I ripped mine all apart again to see if I could add just a tiny bit more slack...I cant see underneath but I am thinking thats where its at....