Your though process in regards to sharing your knowledge is what will separate you from many other professionals. I've been in business for over 20 years and I love teaching those who care to learn. Regardless of how long we have been building, there will always be other techniques that we can employ within our builds. Thank you for being selfless and just know THAT is what will cause you to be rewarded!!!
Absolutely agree with the appreciation from other folks on here, both seasoned pros & amateurs alike. I’ve recently changed careers completely & after years of DIY, wanted to start my carpentry journey & business. So insightful advice from yourself is invaluable to me & others in the same position to build up experience & confidence. Thank you Alastair.
And old boy once said to me .. after i gloriously chuffed up.."Ed the person who makes no mistakes makes nothing" he was was being very generous but totally human... First rate generous content.. thanks
You seem like a genuinely nice and honest guy. I'm a builder with a carpentry background and regularly get asked to install these alcove units and it goes without saying that there is so so so much more involved than people realise. Your pricing seems very good value for money for the workmanship and I charge a fair amount more for the same. I'm not running them out like you so maybe my efficiency is lower and thus the cost is higher but I rarely get the cost rejected. I've seen your vid on how you cost your work but I think you might be surprised at what people pay for the correct attention to detail that you clearly offer. Keep up the good work and I've Subbed
dominic smart that’s interesting, where are you based? I have recently slightly upped my pricing but I regularly get the feedback that I am way more than other quotes customers receive. Maybe I’m just not in the right market a lot of the time. I’m guessing maybe you’re in London?
Thanks Alastair. I started this type of work about 18 months ago after a career in something totally different. Its been a steep learning curve but very satisfying when an install is finished - and mistakes rectified! Your work is outstanding and your willingness to help others highly commendable. Thanks...
Hi Alastair you probably don't fully realise how incredibly useful this is to people like me. I'm a carpenter joiner who has already done some stuff like this but recently gone self employed. I want to build a workshop in my garden and slowly do more and more of this sort of thing. Your videos will help me to move my work life in a much more satisfying direction that I have hankered after for some time so many thanks to you good man
Hi Giles thanks for this. I do realise it because I know how hard I found it learning all this from scratch. And also because good people like yourself take the time to give me this feedback. Take a look at the extra content available at www.buymeacoffee,com/Freebird and see if it will help you, I think it will.
I can echo entirely your thoughts on scaling up. I just wasn’t able to find anyone with the same work ethic and attention to detail as me. Pride in your work we used to call it. I’m semi retired and enjoy the interaction with the client as much as the financial reward and don’t miss all the pressure.
Well, I have now scaled up and the pressure has only mounted, and like many in this position I have some difficult decisions ahead of me. I don't want to be the guy running an even bigger business. I am looking at how I might delegate management. None of it's easy to do, and I think you are a wise man to stay small.
Alister, I want to thank you and other helpful youtubers that share their secrets with us other makers. It’s professionals like you, Peter Millard, and Joey Chalk to name a few that are the worlds teachers. Your work is second to none and I would doubt your knowledge and expertise sharing will cut into your business. Thanks from the USA. Packers... what a wonderful word for shims. Cheers
john gibson thanks John I’m always interested when Americans find this content useful as there are so many American woodworking UA-camrs and I often think the methods and materials we use over here might be less relevant in America. I know Peter well but not Joey Chalk so I will look him up now!
old joiner told me " if youve never done nowt wrong youve never done nowt right " its overcoming it that sets you apart . fair play for admiting it great video .
Absolute brilliant and honest video. I’ve been a 1st and 2nd fix carpenter for many years and want to do more workshop stuff. I specialise in kitchens, Howdens and Magnets type as opposed to hand made. I’ve got a couple of loyal customers asking for alcove work so spent hrs on UA-cam to get tips and ensure I provide a top quality product. Wish I’d found this site months ago. I’m now going to spend many hrs watching all Freebird videos. Thanks
I’m glad you like it Andy, let me give you a shortcut and suggest you just go look at the content at the member site which includes my blueprints for how I build alcoves, I’m sure you will find it very good value: www.buymeacoffee.com/freebird
Thank for you willingness to help not only other professionals but some of us DYIer's that just want make a few improvements to our personal homes that don't have much of an idea what to go by you are greatly opening up my thought process so a 1000 thanks and much gratitude from man in Taxes just trying to make his wife happy. Darren in Dallas
I'm not in the trade but love to watch someone else's skills, I tend to do my own projects but make loads of cockups along the way, but really appreciate channel's like yours where I have learnt to scribe and other bit and pieces keep up the good content.Thanks
This happens to me all of the time. I look at an install, even if I measured and made everything like you, and it always seems to take longer. I always say, “I’m a great craftsman but a horrible businessman.” I’m getting better from learning from my mistakes and relying on the grace from people like you sharing knowledge. Thank you so much and you can look forward to at least one coffee a month from me!!
Hey Michael, thank you for the coffee pledge! Did you know there is actually a monthly pledge option that you can set up? www.buymeacoffee.com/freebird Have a look at my latest video first though, I’m sharing some thoughts about the way forward and looking for feedback. ua-cam.com/video/O3ASei7y-Z8/v-deo.html
Freebird Interiors I have, pledged a monthly coffee. Money well spent, and I enjoy your content and I am learning much from you. I have just passed 1 year in business full time and I have hit a plateau. No new work in my immediate future, so a bit nervous now. I am watching your “Can I be honest with you?” video now. I’ll give as much feedback as you can stand and will continue to support you as much as I can. I love your honesty in your approach. I would love to see more SketchUp videos and would happily pay a separate fee for just those.
Alistair, what can I say! Superb, I'm planning on making an alcove cabinet and adding floating shelves. This video and many more of yours have inspired me. Thanks!
Great! Mark I am certain you will find the member site content good value: www.buymeacoffee.com/freebird as it includes the blueprints and formulas for this type of work.
Thank you for sharing your knowledge. i am no expert- just a DIY hopeful and i've found your videos very helpful- you have a good communiction style and voice so i can pay attention :)
Absolutely fascinating Alistair, thanks for sharing. Your ability to systemise the build, whether on not that comes from your architectural training, is really enlightening and something I try and do (and sometimes succeed!). In my experience this is rarely seen in all but a few fitters and this is what sets your business apart. I believe like you that customers will pay more where they feel they can rely on an excellent service.
Thanks Darren. It took a surprisingly long time to systemise things to this extent. I think there are quite a few others out there doing it in a similar way, at least based on their work images i see online that seem to use similar principles.
Useful video thanks , it's not just your trade that encounters problem when trying to upscale , I restore classic cars and had the dream of expanding with bigger premises and more staff , it just created a huge problem , more customers to deal with and more errors from staff who don't seem to have the quality awareness you need , I've scaled back down and it's much less hassle !
Up until I found your channel I didn't know about dynamic components or chunky shelves. I have worked your chunky shelves into my current project and have been doing research on the sketchup dynamic components. Thank you mate for being so free with your knowledge! I will send you some pictures of the shelves. 🙏👍
Exactly what I needed to see and hear. I’m just starting out on this journey and seem to be making the mistake of offering to much choice. Being inexperienced I’m under quoting my time for jobs, running into things I haven’t accounted for and spending to much time on site. I’ve felt like throwing the towel in recently but somethings you’ve mentioned have hit home and given me a glimmer hope for turning things around. So thanks for taking the time to make this video. It’s much appreciated.
Thanks for commenting Paul, I have been there, I know how it feels, and I haven't got all those sorts of issues fully sorted yet myself but have come a long way and managed to stick with it without quitting yet! The things you are experiencing are normal 'paying your dues' in this line of work, you just need to keep re-assessing, learning and improving (regarding the business side of things , not just your craftsmanship etc). Let me tell you this: You are NOT doing it all wrong. it is NOT unusual to make mistakes. It's what we all have to go through and we all have to learn to price for the realities of bespoke work, and stop beating ourselves up with the idea that we should be able to produce every job with perfect efficiency. It's not really possible for human beings to do this when every job is unique, at least not until they are fantastically skilled in a way that can only come from experience and years of mistakes. And the people who have reached this level will be charging much more than you anyway! So you simply DO need to charge for all the contingencies and risks that come with bespoke work. And/or simplify what you offer,. You are the expert on what is really involved, not your customers, don't be swayed by THEIR ideas of a fair price, when experience is teaching you that it is not enough. If you haven't already seen it I think you would benefit from this video: ua-cam.com/video/78-94ZsAyIE/v-deo.html
I've been doing it a number of years and fo not let the customer dictate the price on the job. You have to factor in everything into the price. I'd the customer says you're too much but you have priced accordingly, move on, they can't afford the work. My quotes are free but if I'm asked for a highly detailed quote, it gets charged at an hourly rate. Have paperwork for everything and get signatures on your T&C's, stage completion sheets and final invoice. Make sure you have a sign off sheet that the customer is satisfied with the work completed. Too many cowboy customers out there now.
Really helpful, thanks. I've tried various methods to fit the return on to the chimney breast, with varying results. You seem to have refined this very nicely.
Hi and thanks for showing how the professionals do it, in detail..! Just looking to create the same, classic style units, in my own home, which makes this a really useful video. Thanks for taking the time & effort, good luck with your plans, Dave
What a fantastic video for an avid DIYer!! I can't add to the vast array of compliments below but to say thank you so much for sharing! I'll be watching over and over again as I embark on building/fitting similar alcove cabinets and shelving over the next month or so - imagine it'll take that long as a one-man band, along with other decorating of the lounge! You have given plenty of useful advice (appreciate your honesty and openness throughout). Cheers!
Great idea about options for the client! (modern or classic) and your right about what most people want. I haven't fitted lots lately but the last ones I made were floating. Great video. Thanks
Thanks for sharing. Amongst the very excellent makers' channels that there now are, I think yours stands out through coverage of the extra dimension of the challenges of running a small business and all of the dozens of things that must be considered outside of design and construction.
Steve Hitchen this sort of comment is very helpful as it clarifies what I already thought might be one of the distinctives of my channel. Knowing it’s appreciated gives me confidence to do more of the same. Thanks for commenting.
You and I are on the same page when it comes to the business idea and plans. Am an Architect but I love wood work so I do this full time. Learning different methods on how to do thing helps me to be more efficient and professional in my work. Thanks for your info.
I started out in architecture too! How long did you work as an architect, and how long have you now been woodworking? I didn’t get as far as fully qualifying (completed a degree and year in practice) but long story short decided I would never be satisfied only designing without also making.
Brilliant video and a very thoroughly thought through method. When I was an apprentice my mentor always said to create a system in any application you do, whether that be hanging a door, fitting out skirting or cutting in a roof. It makes the job flow and makes life soo much easier. Thank you for sharing your hard earned knowledge, I'm really enjoying your channel and looking forward to getting my business underway 👍
Great! I love how varied the responses to this video are, some people think I just waffle on far too long. Check out this recent announcement that might interest you: www.buymeacoffee.com/Freebird/don-miss-out-new-fitted-furniture-content
just discovered your Channel. some really great advice. with regards the gap at the top of the shelves, and easy way to fix this is to install the architrave to the ceiling, but not the shelves, this will allow the shelves to flex. The deflexion will be hidden behind the architrave.
Great information and an all round very good channel. I've been making alot of theses for years. Fully built and painted on site. Will get a workshop one day I hope. Top work, thanks for sharing.
Thanks again for sharing Alistair. I'm always learning some really useful hints whenever I watch your videos. I couldn't agree more about scalability. I've spoken to a few joiners who used to run big companies and now work by themselves or in a small team. They have all said that they are much happier now and earning nearly just as much. Strive to be happy rather than rich👍🏻
David Gill yeah I’ve also heard the same story again and again and I know I wouldn’t be happy running something too big. Still working on the happiness thing but I’ve found a lot more happiness since YouTubing, I like to share and interact in this way. It gives some validation to the years of struggling to make the woodworking business work!
@@Alastair_Freebird as I've mentioned to you before, I'm fairly new to fitted furniture and I really appreciate everything you share. Perhaps you should get a patrion account. It's only fair that you get paid for the knowledge you provide. Noow get to bed! It's nearly midnight 🤣
David Gill yes I’ve been thinking Patreon as a next step. I rang Peter Millard to pick his brains on this recently. I’ve been holding back a bit because life is busy and I thought I’d need to provide extra content, and I didn’t want to start something I couldn’t sustain. I’ve never promised a certain number of videos per week (although I have managed to keep putting 1 to 2 out per week lately). So I was interested to discover Peter doesn’t necessarily offer extra content, and people contribute anyway in recognition of the help he gives them. What do you think, would you expect more as a Patreon subscriber? What about just early access to the same videos? Down the line I’m wanting to offer more including the sketchup training I have mentioned, and I’m thinking this may even be a specially set up membership site, but it’s going to take some planning.
@@Alastair_Freebird I think you should. I'm a patron to both Peter and Andy and I'm certainly not made of money. But the way I see it is like this. I really don't care about the extra content I get from being a patron, nor do I expect constant content every week. I would much rather quality over quantity. It's the fact that they have been there and helped me with advice and product knowledge when I've needed it. That has made me better at my job which in turn will make me more money. That's why I'm happy to be a patron. I'm guessing that alot of your viewers are keen to learn like me and we really appreciate the help. No one in any other industry offers advice for free, I just hope your other viewers feel the same.
@@davidgill1716 i I 100% agree! No need for extra content if you don't promise that from the start . The only thing you might find different is getting more questions from supporters that felt guilty of meithering you beforehand! Thanks for a great video
Thanks for your videos, I have watched several. I am working on my own home not going into business, but these are helpful nevertheless. I have a modest budget and the information you have given will help to get the best possible fit & finish within that budget.
hi mate i am new to your chanel, i love your work and the way you explain what methods you use etc. its great for all the DIYers out there to have a go at home. with your guidance and tips our homes should look a lot better than they do already. keep up the good work mate i look forward to your next project, regards kevin
Hi, you will find the most detailed insights into our construction methods from workshop through to installation in our 'fitted furniture apprenticeship' course available here: ua-cam.com/video/WaDJSBjrNjI/v-deo.htmlsi=YQhW21DXVdYPLdnM. the price is reduced if you become a member (then you can cancel at any time). Membership gives you access to a large library of training content.
Thanks Alistair I've just watched this one. I've just made a pair of alcove units with floating shelves above. Will do them a little differently next time, my scribing could stand improving and the inset hinge idea is one I haven't tried and will try out. I'm thinking it must simplify the way the end panels and scribes go on. Again, thanks for creating these videos and sharing your knowledge. I'm not sure I'd even be in business without help from other guys like yourself.
Thanks very much for posting this, really helpful. Can I ask what it is you do to create the stepped effect on the cabinet top please? really great overall effect and look. thanks
Hi! It’s a bearing guided router cutter I think we’ve been using the 6mm T139 here www.wealdentool.com/acatalog/Online_Catalogue_Small_Ovolo_Round_186.html
Enjoying the content on your channel Alastair, binge watched Peter Millard, London Craftsman and working my way through your channel. Started my career as a cabinetmaker in 1994, my father was a Forman Cabinet Maker for 45 years so have the highest appreciation and respect for what you do 👍 One day I would love to start a small domestic fitted furniture business, keep up the great work 👍
Thanks for going through it and sharing your hard won wisdom. Long enough day working and the extra time spent on videoing is appreciated. Happy New Year 2021 from Steven and Matthew.
Love watching your builds and process, would really like to see an actual workshop cabinet build and how your process works. Good luck with your plans for growth and thanks, I find the videos very interesting.
Great video and thanks for sharing some great info. Im based in northwest and have only recently started out on my own and I know very little in business etc compared to you but I think your underselling yourself for quality of product your producing
@@Alastair_Freebird yes I think so mate.maybe use your prices as a rough guide only? every job different and even now im starting to realise those jobs that going to be issues somewhere and the sometimes awkward customers haha
You may also be interested in www.buymeacoffee.com/Freebird where I am more active now than UA-cam. Also my Instagram page @freebirdinteriors is where I am still posting free content of this sort (in the stories)
Great video great content aimed at people like myself a small business owner. It’s really helpful seeing how others tackle similar work but man you can ramble on!!!
Great video mate. I once heard that a hoarder of information and techniques shows insecurity in their own ability. So the fact that you share so much says a lot about you and your business. Quality looks great on these units. Sorry I didn’t get back to you on instagram about the sliding door gear. Been crazy busy renovating my house and hadn’t caught up on your videos lately and wanted to see your UA-cam video before replying.
NenzelMUSIC good to hear from you again! That’s ok. Good thought, thanks, I suppose I’ve instinctively always thought that to be true, and always thought more highly of the experts who were willing to share their knowledge.
Thanks, you explain things really well. I am a maker and get asked to build in units quite a bit but I don’t want to get into the spraying/painting side so don’t usually accept the jobs. Peter Millard from 10 min workshop is very good at built ins also. I will watch your channel with interest.
Craig Peel a lot of makers leave the painting to someone else. For years we hand painted - mini foam rollers and Leyland acrylic eggshell . Paint the boards prior to assembly.
Love the idea of having a couple of options. I can design a piece in my head start to finish and even go through the build process but getting that on to a piece of paper as a drawing I fall short on, I have tried Sketchup etc but can't get the hang of it, unfortunately. Luckily I have high standards and customers put trust in me and I dont get any complaints. Am 43 now and really want to start pushing on and getting out of my comfort zone and become more organized and efficient.
sicpac66 there are benefits to going straight from brain to cutting list if it works for you. As long as you are working on your own it’s actually better and more profitable in many ways if you’re skilled at it.
If you do want to learn sketchup I’ve had a lot of feedback that my first 2 tutorial videos are easy to follow. ua-cam.com/video/beA6VuchBkU/v-deo.html
If you want to go for the really high end of the market you are into full solid wood construction where people want to see traditional joinery and very fine finishes on natural woods. You can charge significantly more for that but it also requires a much greater level of craftsmanship and time to produce and is a much smaller market. I was talking to a guy that does super high end kitchens a couple years back and he was showing me pictures of kitchens be built that cost in the £100K and £150K range, beautiful work but they take weeks to construct.
How have I not come across your videos before! Amazing work Alastair. I’m always willing to learn more from the techniques that I use. Brilliant video subscribed and liked 👍🏼
Thanks for going the extra mile and making these videos. I do like your idea on the master class and training, I think that these video are very useful. I am guessing that you do hook up with other Makers, such as Peter Millard, Skillbuilder, Gosforth Handyman and Gid Joiner. It would be interesting to see a collaboration. Lastly on some of your videos you refer to brackets. fixings, common tools etc.. that you use, could you publish some of these links on your channel?
I know Peter, less so the other guys! Ok I will keep in mind to mention where I get some brackets etc in future. Any particular bit of hardware you wanted to know about?
Freebird Interiors, these are the brackets I use www.amazon.co.uk/Shape-Metal-Corner-Brace-Bracket/dp/B00E0FVKBE however the one on your videos have a shorter length on one side say 25mm and 65mm on the other.
thanks for posting this, very interesting, will check out your other posts. Don't know if anyone else could smell tube adhesive every time you showed it on the video?? i'm weird (and have used too much of it!) so maybe just me. All the best.
Lee Barber I think it’s just you 🤣 but have you tried the one that smells like pineapples? One of the many everbuild variants... multistick I think it was called!
Thanks again for sharing Alistair great work again stop worrying about your video being too long they are Incredibly useful, I'm always learning from your work
As a tradesman who has always been happy to share information - though not a chippy :) - I am very grateful you are sharing this stuff to enable people like me who want to do this stuff for themselves and who enjoy working with wood. Keep up the great work. Dave
Hi Alastair, love the channel, just wondered what you use for the "worktop" on the base units? is it still 18mm MDF that's been routed? also what router bit would you recommend? many thanks in advance, Jack.
Great video thanks. Interesting to see how you do things. It looked from the video like you fix your bookcase in temporarily, do the scribes, then pull it out again and pocket screw the scribes on. Is that right? Avoids screws to the inside I guess. Can't believe you absorbed the cost of birch ply over mdf. It's beautiful stuff but so much more expensive. Do the cabinet edges remain unfinished birch ply when the doors are opened? Great insight thanks, and compliments on your guitar playing too... 👌🙂
Black Tea One Sugar ah, no that shot shows how the back is fixed to the sides with pocket holes. We actually just glue and pin the scribes on! White wax fill and overpaint the pin holes
Great video! Thanks so much for sharing. I'm going to need to watch it again to understand how the sides of the cupboards go in, as I do mine differently and yours look way nicer! I'm guessing you were pretty knackered at the end of that. Looks fantastic though.
Great video bud.. you make it look very easy, would love to see a tutorial on how you actually scribe your trims to make them so neat , that would be a big help. 🤙🏻
Thanks. I show scribing on Instagram quite a lot. Here for example: instagram.com/s/aGlnaGxpZ2h0OjE3ODQ3MTk2Nzc1MzgxNTM5?igshid=1oh43duh10ai1&story_media_id=2425488996903670983
Loving your videos, you explain things very clearly 👍 I am a maker but almost exclusively for my own home, built in wardrobes and an alcove like this in my near future so these are helping my ideas on how to achieve them. Thanks for making and posting the content and I hope you are well during this time 😊
Hi Alastair, I'm about to try building my own alcove units based on info gleaned through your subscription site and UA-cam videos - thanks again for sharing your wisdom! One quick question - do you seal the birch ply for the base units when leaving unpainted? I'm reading mixed advice about whether this is necessary.
I just want to say I have been watching many of your videos which has inspired me to push my business this way. I have dabbled in custom built units and still do and find it enjoyable. From the design to the build and watching your videos about sketchup and stuff has made me think to push more into this. So keep up the good work and content Kind regards Gavin GLPBuilders
Hi Alastair - thanks for taking the time for putting this together. I am attempting a similar project this weekend and have found your videos super helpful and insightful. If I was in Sheffield I'd have probably given you a call for you to do them! Cheers
Hey you’re welcome and since this comment came in while I was posting a members video here is a direct link since I’m sure you’ll find it interesting! ua-cam.com/video/GmJqVz-C2LI/v-deo.html
Thanks. you will like these other videos: ua-cam.com/video/Oy7dH-Z9MqI/v-deo.html (a much less waffly demonstration of alcove techniques!) ua-cam.com/video/QAm2wvSjSgU/v-deo.html (Probably my most well received video on the subject, detailing the full process of installation as it happens)
Hello to you, I’ve subscribed...... It’s a pleasure to hear you talk very honestly about the trials and tribulations of your work.I’ve been a kitchen/bathroom/bedroom fitter for over 20 years,self employed for 15 of them.Whenever you chat about a certain situation or scenario I get taken back to a point in time where I’ve had that exact experience! It’s a very difficult way to earn a crust sometimes,as we have to factor in so many different eventualities,from tools,vehicle running costs and a host of other things right the way up to actually doing the job.It hurts at this very moment in time being self employed doesn’t it?....especially with no help until June...but we chose our own path! I’ve seen an awful lot of tradesmen over the years-some of whom talk a great talk,but when you look at the finish of their work...well.... Rest assured,your work is of an extremely high standard.In the 10 years I’ve lived in my house I’ve never had another tradesman to do anything-I’m pleased and proud to say I’ve done the lot.....other than just after storm Clara this year when the flat roofing felt got ripped off. It turned out he wasn’t a roofer at all...he can only do fibreglass-he did a sensible job,but the mess.....😆😆.The first tool out of my van is my vacuum (Festool CT 22) it’s 15 years old and still spot on-there’s just no need for mess. You are one individual who’d be welcome to work in my place,you’re honest,capable,conscientious,your work speaks for itself-you’re a first class tradesmen.You also do a pretty nifty job of presenting your videos👍 Don’t let the bastards get you down mate. All the best.
jonnygunner65 well, if you’re ever looking to hire someone please give me a call!! I really don’t know if we’re going to get through this coronavirus period now. In one months time it looks like we’ll have needed to raid the savings set aside for the workshop move just to stay afloat. If we furlough staff it’s a guarantee of business collapse because other overheads won’t stop. But it’s a real dilemma whether we can/should return to installing in peoples houses right now. Anyway, thank you for the solidarity it’s nice to read a message like this. And thank you for subscribing . Are you aware of the extra member only content at www.buymeacoffee.com/Freebird ? I’m getting a lot of good feedback on it 👍
Why not apply a moulding at the top to cover the gap at the ceiling? Most of my customers seem to prefer that method. Nice job and thank you for sharing.
jerr oukt I have done ones like that. How do you secure it the ceiling? It’s just that a few times I’ve had issues with cracking caulk line at the top. Either the settlement of the weight of books when loaded. Or on one project (not alcove actually but built to the ceiling) the structure of the building seemed to expand and contract seasonally so a gap of 6mm or so would open and close again periodically!
Great videos, Would you be able to do separate videos focusing on individual skills such as an A-Z on 'scribing' & 'caulking' that would be really beneficial before an amateur like me starts a project. Many thanks.
I’d love to. Very difficult to find time these days alongside building a business, my overheads are getting so high. I do post a lot on Instagram stories so have a look there. I know it doesn’t suit everyone however it’s much quicker to upload so I can keep getting the content out there.
I understand, just a thought, maybe as you create more content you could cut those individual skills from existing videos at a later date to make them? Looks like i will have to start using Instagram. :)
@@equin9309 I’ve had exactly the same thought. I now have a huge back catalogue of footage and it would be possible to screen record the archived stories from instagram and create detailed tutorials showing a complete installation process but grabbing details from various jobs over the years. I would love to do this. It just all all takes time:
Here is an example of a ‘story’ on instagram (recorded and uploaded on the fly as I work) which I have saved as a ‘highlight’ (which means it stays as a link at the top of my profile rather than disappearing from view after 24 Hours). I’m not quite sure whether this is viewable without an instagram account, would you mind letting me know? instagram.com/s/aGlnaGxpZ2h0OjE4MDU2NDM5MjkyMjQ4NTI1?igshid=r6or9jmr55zh&story_media_id=2425559325004824422
Wow looks amazing😍 I am currently embarking on this journey. Wanting to build an alcove, and I really want to tear my hair out. I currently have a gas meter and boxinin which makes it all so complicated. Any suggestions🤷🏾♀️
Hi Alastair , I have been racking my brains on something you had shown on a video which I cannot find. It was the hafele insert sleves for adjustable shelves 7.5mm - anyway what i was looking for is or ask you, what jig did you use since all seem to be for 5mm holes. many thanks .
Hi I think I showed them way back in a dark oak library job but also in a more recent Instagram story. We used the 7.5mm drill and punch from hafele. I think in the pat we have used a standard jig but only to punch the point of the 5mm drill as a centre mark for each hole, then following along with the 7.5mm drill manually. More recently we tried it on the CNC with a dedicated 7.5mm drill but had problems with tolerance after painting (I had though the sleeve word work in the hole even after painting but it all got too tight)
@@Alastair_Freebird not sure if you got my reply my computer went awol on me. Any way I had a feeling there maybe some issues, so i am looking at the altro flat bookcase strip , since its mdf not solid wood so i got thinking these maybe better than 5mm holes , here is a link if you are interested. I am sure you have come across the concept .www.ironmongerydirect.co.uk/product/altro-flat-bookcase-strip-1829x19mm-electro-brass-plated-153629
Hi yes those Tonk strips do get round some of the advantages but have a dominating appearance. Sugatsune do a more discrete one call the AP-DM I think which we use sometimes
@@Alastair_Freebird thank you for that bit of info, those ones you mentioned are definitely more discrete, I guess they must be OK for books, I can't see you using them if they were crap.:). These are also narrower at 12mm, the ones I have seen are at 19mm. Seems a good idea, all you need to do is make a channel with a router and screw in, look more professional I think also compared to the 5mm hole way, although depending on the job and person it's for.
Another great video. Interesting that the skirting needed to be smaller in height to accommodate the units. Did the customer say anything about this? Due to this fact it looked as if you butted them up to the other skirting as a scribe would not be possible. How do you find this method?
Hi Adrian, see this video from 30 seconds in for a quick cha about why I moved away from always matching up tall skirtings to standardising on a shorter self-made profile: ua-cam.com/video/GmJqVz-C2LI/v-deo.htmlsi=so9cTWcro1Q1soX-
In summary, I didn't like how tall skirtings raised the overall cabinet height to higher than was often desirable for TV viewing height (or forced me to make silly squashed-looking doors). Tall skirtings also reduced accessible storage space in the cupboard, and often in old houses they were not level from one side to the other. So a shorter moulded skirting that usually butts up to the flat face of the room skirting seemed the most elegant solution, while adding to our production efficiencies (it can be a hassle sourcing short lengths of traditional tall skirting)
Finally, you may find this video interesting where the customer decided to have the cabinets refitted with a taller matching skirting: ua-cam.com/video/iwtkfPP8baY/v-deo.htmlsi=GWqQT-YHMyldip1C
Hi my name is Sean Matthews and I would just like to say I have watched 2 of your videos now and have subscribed to your channel I love your honest approach and the skill set you possess. I am also a carpenter/joiner and run a small but growing bespoke carpentry and joinery business in Wales. I have recently been awarded the title of Screwfix Tradesperson 2020 and have posts that regularly exceed 40k views on Facebook. I will definitely be following your channel as we seem to have a lot in common especially with making unplanned mistakes and correcting them lol. A pleasure to watch! Would love a chat in the future. Keep up the high standards and hopefully chat soon. Stay safe Sean S.M.Carpentry
Giovanni Fiori hi, Thankyou. I think at this time we were making them as 5 piece doors. Medite MR MDF. 6mm panel. We routed a 6mm groove full length of stile sides, and lengths and ends of rails, and used loose tenons of the same material as the panel
Really enjoy watching all of your videos because of your honesty and detail coverage. Can I ask what do you make the tops from? They seem quite thick for mdf but maybe I'm wrong. Thank you
Great video as always 👍🏼 thanks again for sharing your knowledge. Really helps noob learners like me. I wish I had a boss like you, I'd learn so much more. My boss (who won't see this) putting it politely, is hard work!! lol Look forward to seeing your next video.
MrBishbashbosh2012 I was amazed and pleased at the airtime Peter gave to talking about me, and as he said we’ve been in intermittent contact for some time. I’m glad if you’ve appreciated what I’m doing. Are you at makers central meeting Peter and Andy this weekend?
Unfortunately I couldn’t make it, really gutted, especially as I don’t live too far away (near Stratford-upon-Avon), did you go and meet them? I am in a point in my life where I need a change in direction. I would love to do what you do but it’s a bit hard when you don’t have the qualifications or experience, so I’m doing as much as I can at the weekends to train myself, using videos like yours. Plus I’m on a tight budget. Any tips?
MrBishbashbosh2012 no I didn’t make it either! Tips? Don’t do what I do 😆 It has been years of stress and uncertainty and low income!!! I am starting to turn a corner now I think, and on the positive side there are aspects I really enjoy, including YouTubing about it all, but I still fluctuate between being fired up for the challenge and (very often) just longing for the stability of a normal job and not always living on the edge of another underpriced job or costly mistake!!
I would have loved to work for a decent amount of time in someone else’s business, in a well equipped workshop. I would recommend that to anybody (but not easy to get into) before launching too soon into your own business.
Freebird Interiors hmmm well that’s what I worry about under pricing a job, I really need to know how long everything will take me to do. At the moment I am working on our new dining table, add me Add me as a friend on UA-cam! youtu.be/addme/azIsLXkjfJu0vstVrezqIB4gZs6HvQ and I will send you a photo. I am just trying to master inlaying bow ties but having issues some of which I am unsure how to get through, have you done them?
Subscribed about 1 month ago. I'm a joiner by trade, but now purely install sash Windows daily. Love your content. Nice to see how other trades install there work 👍🏽 lets grow your channel
Jez D thanks. Interesting to hear from different people who appreciate the content. Yes please help get the word out! Did you decided that specialising only in sash windows was a good business move?
Thanks for sharing if I could find decent traids on UA-cam in my area I would use them if I could watch a few videos on there methods it gives confidance espeshaly if there willing to show the world and take comments. You are churning out a quality product.
Your though process in regards to sharing your knowledge is what will separate you from many other professionals. I've been in business for over 20 years and I love teaching those who care to learn. Regardless of how long we have been building, there will always be other techniques that we can employ within our builds. Thank you for being selfless and just know THAT is what will cause you to be rewarded!!!
People like you are needed to lead the next generation of cabinet makers.
Absolutely agree with the appreciation from other folks on here, both seasoned pros & amateurs alike.
I’ve recently changed careers completely & after years of DIY, wanted to start my carpentry journey & business. So insightful advice from yourself is invaluable to me & others in the same position to build up experience & confidence.
Thank you Alastair.
Thanks so much, I appreciate this comment!
And old boy once said to me .. after i gloriously chuffed up.."Ed the person who makes no mistakes makes nothing" he was was being very generous but totally human... First rate generous content.. thanks
chevy imp thanks and I sometimes think that saying could be the slogan for my channel 👍
You seem like a genuinely nice and honest guy. I'm a builder with a carpentry background and regularly get asked to install these alcove units and it goes without saying that there is so so so much more involved than people realise. Your pricing seems very good value for money for the workmanship and I charge a fair amount more for the same. I'm not running them out like you so maybe my efficiency is lower and thus the cost is higher but I rarely get the cost rejected. I've seen your vid on how you cost your work but I think you might be surprised at what people pay for the correct attention to detail that you clearly offer. Keep up the good work and I've Subbed
dominic smart that’s interesting, where are you based? I have recently slightly upped my pricing but I regularly get the feedback that I am way more than other quotes customers receive. Maybe I’m just not in the right market a lot of the time. I’m guessing maybe you’re in London?
Thanks Alastair. I started this type of work about 18 months ago after a career in something totally different. Its been a steep learning curve but very satisfying when an install is finished - and mistakes rectified! Your work is outstanding and your willingness to help others highly commendable. Thanks...
Terry Lindop thanks for the comment Terry and best wishes with your endeavours.
Hi Alastair you probably don't fully realise how incredibly useful this is to people like me. I'm a carpenter joiner who has already done some stuff like this but recently gone self employed. I want to build a workshop in my garden and slowly do more and more of this sort of thing. Your videos will help me to move my work life in a much more satisfying direction that I have hankered after for some time so many thanks to you good man
Hi Giles thanks for this. I do realise it because I know how hard I found it learning all this from scratch. And also because good people like yourself take the time to give me this feedback. Take a look at the extra content available at www.buymeacoffee,com/Freebird and see if it will help you, I think it will.
I can echo entirely your thoughts on scaling up. I just wasn’t able to find anyone with the same work ethic and attention to detail as me. Pride in your work we used to call it. I’m semi retired and enjoy the interaction with the client as much as the financial reward and don’t miss all the pressure.
Well, I have now scaled up and the pressure has only mounted, and like many in this position I have some difficult decisions ahead of me. I don't want to be the guy running an even bigger business. I am looking at how I might delegate management. None of it's easy to do, and I think you are a wise man to stay small.
As a carpenter with over 30 years experience I find your opinions very true , enjoy you’re way of working , keep up the good work
Daren Skerratt I appreciate this comment very much, thank you!
Older houses, floors out of level, and the walls! a real test of your skills scribing to them. Nice job.
Thanks
Alister, I want to thank you and other helpful youtubers that share their secrets with us other makers. It’s professionals like you, Peter Millard, and Joey Chalk to name a few that are the worlds teachers. Your work is second to none and I would doubt your knowledge and expertise sharing will cut into your business. Thanks from the USA. Packers... what a wonderful word for shims. Cheers
john gibson thanks John I’m always interested when Americans find this content useful as there are so many American woodworking UA-camrs and I often think the methods and materials we use over here might be less relevant in America. I know Peter well but not Joey Chalk so I will look him up now!
old joiner told me " if youve never done nowt wrong youve never done nowt right " its overcoming it that sets you apart . fair play for admiting it great video .
chris taylor it’s a true saying!
Absolute brilliant and honest video. I’ve been a 1st and 2nd fix carpenter for many years and want to do more workshop stuff. I specialise in kitchens, Howdens and Magnets type as opposed to hand made. I’ve got a couple of loyal customers asking for alcove work so spent hrs on UA-cam to get tips and ensure I provide a top quality product. Wish I’d found this site months ago. I’m now going to spend many hrs watching all Freebird videos. Thanks
I’m glad you like it Andy, let me give you a shortcut and suggest you just go look at the content at the member site which includes my blueprints for how I build alcoves, I’m sure you will find it very good value: www.buymeacoffee.com/freebird
Thank for you willingness to help not only other professionals but some of us DYIer's that just want make a few improvements to our personal homes that don't have much of an
idea what to go by you are greatly opening up my thought process so a 1000 thanks and much gratitude from man in Taxes just trying to make his wife happy.
Darren in Dallas
I'm not in the trade but love to watch someone else's skills, I tend to do my own projects but make loads of cockups along the way, but really appreciate channel's like yours where I have learnt to scribe and other bit and pieces keep up the good content.Thanks
Thanks for the comment, glad it’s helped!
This happens to me all of the time. I look at an install, even if I measured and made everything like you, and it always seems to take longer. I always say, “I’m a great craftsman but a horrible businessman.” I’m getting better from learning from my mistakes and relying on the grace from people like you sharing knowledge. Thank you so much and you can look forward to at least one coffee a month from me!!
Hey Michael, thank you for the coffee pledge! Did you know there is actually a monthly pledge option that you can set up? www.buymeacoffee.com/freebird Have a look at my latest video first though, I’m sharing some thoughts about the way forward and looking for feedback. ua-cam.com/video/O3ASei7y-Z8/v-deo.html
Freebird Interiors I have, pledged a monthly coffee. Money well spent, and I enjoy your content and I am learning much from you. I have just passed 1 year in business full time and I have hit a plateau. No new work in my immediate future, so a bit nervous now.
I am watching your “Can I be honest with you?” video now. I’ll give as much feedback as you can stand and will continue to support you as much as I can. I love your honesty in your approach. I would love to see more SketchUp videos and would happily pay a separate fee for just those.
You’ve made something very complex look doable. Thanks a lot.
Thanks, let me know how you get on if you try it! Full plans and lots more tips available at www.buymeacoffee.com/freebird
Alistair, what can I say! Superb, I'm planning on making an alcove cabinet and adding floating shelves. This video and many more of yours have inspired me. Thanks!
Great! Mark I am certain you will find the member site content good value: www.buymeacoffee.com/freebird as it includes the blueprints and formulas for this type of work.
Thank you for sharing your knowledge. i am no expert- just a DIY hopeful and i've found your videos very helpful- you have a good communiction style and voice so i can pay attention :)
That’s really encouraging to hear thanks so much! Do you have any specific questions? There’s a good chance I could point you to a relevant video
Wow Thank you so much Alistair I will be trying to recreate this in my home and hopefully it is as beautiful as the ones you have made
Absolutely fascinating Alistair, thanks for sharing. Your ability to systemise the build, whether on not that comes from your architectural training, is really enlightening and something I try and do (and sometimes succeed!). In my experience this is rarely seen in all but a few fitters and this is what sets your business apart. I believe like you that customers will pay more where they feel they can rely on an excellent service.
Thanks Darren. It took a surprisingly long time to systemise things to this extent. I think there are quite a few others out there doing it in a similar way, at least based on their work images i see online that seem to use similar principles.
Useful video thanks , it's not just your trade that encounters problem when trying to upscale , I restore classic cars and had the dream of expanding with bigger premises and more staff , it just created a huge problem , more customers to deal with and more errors from staff who don't seem to have the quality awareness you need , I've scaled back down and it's much less hassle !
Craig Watton interesting to hear.
Up until I found your channel I didn't know about dynamic components or chunky shelves. I have worked your chunky shelves into my current project and have been doing research on the sketchup dynamic components. Thank you mate for being so free with your knowledge! I will send you some pictures of the shelves. 🙏👍
Great video Alistair …….. thanks again for your sharing of experience 👍
Thanks, glad it’s been helpful!
Exactly what I needed to see and hear. I’m just starting out on this journey and seem to be making the mistake of offering to much choice.
Being inexperienced I’m under quoting my time for jobs, running into things I haven’t accounted for and spending to much time on site.
I’ve felt like throwing the towel in recently but somethings you’ve mentioned have hit home and given me a glimmer hope for turning things around.
So thanks for taking the time to make this video. It’s much appreciated.
Thanks for commenting Paul, I have been there, I know how it feels, and I haven't got all those sorts of issues fully sorted yet myself but have come a long way and managed to stick with it without quitting yet! The things you are experiencing are normal 'paying your dues' in this line of work, you just need to keep re-assessing, learning and improving (regarding the business side of things , not just your craftsmanship etc). Let me tell you this: You are NOT doing it all wrong. it is NOT unusual to make mistakes. It's what we all have to go through and we all have to learn to price for the realities of bespoke work, and stop beating ourselves up with the idea that we should be able to produce every job with perfect efficiency. It's not really possible for human beings to do this when every job is unique, at least not until they are fantastically skilled in a way that can only come from experience and years of mistakes. And the people who have reached this level will be charging much more than you anyway! So you simply DO need to charge for all the contingencies and risks that come with bespoke work. And/or simplify what you offer,. You are the expert on what is really involved, not your customers, don't be swayed by THEIR ideas of a fair price, when experience is teaching you that it is not enough. If you haven't already seen it I think you would benefit from this video: ua-cam.com/video/78-94ZsAyIE/v-deo.html
I've been doing it a number of years and fo not let the customer dictate the price on the job. You have to factor in everything into the price. I'd the customer says you're too much but you have priced accordingly, move on, they can't afford the work.
My quotes are free but if I'm asked for a highly detailed quote, it gets charged at an hourly rate.
Have paperwork for everything and get signatures on your T&C's, stage completion sheets and final invoice. Make sure you have a sign off sheet that the customer is satisfied with the work completed. Too many cowboy customers out there now.
Really helpful, thanks. I've tried various methods to fit the return on to the chimney breast, with varying results. You seem to have refined this very nicely.
I'm glad you think so, yes it works for us.
Hi and thanks for showing how the professionals do it, in detail..!
Just looking to create the same, classic style units, in my own home, which makes this a really useful video.
Thanks for taking the time & effort, good luck with your plans, Dave
dave green glad to help 👍
What a fantastic video for an avid DIYer!! I can't add to the vast array of compliments below but to say thank you so much for sharing! I'll be watching over and over again as I embark on building/fitting similar alcove cabinets and shelving over the next month or so - imagine it'll take that long as a one-man band, along with other decorating of the lounge! You have given plenty of useful advice (appreciate your honesty and openness throughout). Cheers!
Alex Hutton thanks for that. Plenty of other advice you might find helpful in other videos on the channel!
Just completed my Alcove cupboard, thanks for inspiration and all the tips! Thanks Alistair!
You’re welcome!
Thanks
You're welcome - wow I think you might have given me a tip there? That would be my first on the UA-cam platform, thank you!
Incredibly useful video. Thanks for sharing your methods. Richard
Richard Mountford thanks for the thanks! 🙏
Great idea about options for the client! (modern or classic) and your right about what most people want. I haven't fitted lots lately but the last ones I made were floating. Great video. Thanks
Thanks for commenting!
Thanks for sharing. Amongst the very excellent makers' channels that there now are, I think yours stands out through coverage of the extra dimension of the challenges of running a small business and all of the dozens of things that must be considered outside of design and construction.
Steve Hitchen this sort of comment is very helpful as it clarifies what I already thought might be one of the distinctives of my channel. Knowing it’s appreciated gives me confidence to do more of the same. Thanks for commenting.
You and I are on the same page when it comes to the business idea and plans. Am an Architect but I love wood work so I do this full time. Learning different methods on how to do thing helps me to be more efficient and professional in my work. Thanks for your info.
I started out in architecture too! How long did you work as an architect, and how long have you now been woodworking? I didn’t get as far as fully qualifying (completed a degree and year in practice) but long story short decided I would never be satisfied only designing without also making.
Brilliant video and a very thoroughly thought through method. When I was an apprentice my mentor always said to create a system in any application you do, whether that be hanging a door, fitting out skirting or cutting in a roof. It makes the job flow and makes life soo much easier. Thank you for sharing your hard earned knowledge, I'm really enjoying your channel and looking forward to getting my business underway 👍
Great! I love how varied the responses to this video are, some people think I just waffle on far too long. Check out this recent announcement that might interest you: www.buymeacoffee.com/Freebird/don-miss-out-new-fitted-furniture-content
just discovered your Channel. some really great advice. with regards the gap at the top of the shelves, and easy way to fix this is to install the architrave to the ceiling, but not the shelves, this will allow the shelves to flex. The deflexion will be hidden behind the architrave.
That makes a lot of sense, thanks
Many thanks. I'm about to build a cupboard to hide the gas/electric meters and this was just the sort of thing I was looking for.
Great information and an all round very good channel. I've been making alot of theses for years. Fully built and painted on site. Will get a workshop one day I hope. Top work, thanks for sharing.
Thanks for the comment!
Thanks again for sharing Alistair. I'm always learning some really useful hints whenever I watch your videos. I couldn't agree more about scalability. I've spoken to a few joiners who used to run big companies and now work by themselves or in a small team. They have all said that they are much happier now and earning nearly just as much. Strive to be happy rather than rich👍🏻
David Gill yeah I’ve also heard the same story again and again and I know I wouldn’t be happy running something too big. Still working on the happiness thing but I’ve found a lot more happiness since YouTubing, I like to share and interact in this way. It gives some validation to the years of struggling to make the woodworking business work!
@@Alastair_Freebird as I've mentioned to you before, I'm fairly new to fitted furniture and I really appreciate everything you share. Perhaps you should get a patrion account. It's only fair that you get paid for the knowledge you provide. Noow get to bed! It's nearly midnight 🤣
David Gill yes I’ve been thinking Patreon as a next step. I rang Peter Millard to pick his brains on this recently. I’ve been holding back a bit because life is busy and I thought I’d need to provide extra content, and I didn’t want to start something I couldn’t sustain. I’ve never promised a certain number of videos per week (although I have managed to keep putting 1 to 2 out per week lately). So I was interested to discover Peter doesn’t necessarily offer extra content, and people contribute anyway in recognition of the help he gives them. What do you think, would you expect more as a Patreon subscriber? What about just early access to the same videos? Down the line I’m wanting to offer more including the sketchup training I have mentioned, and I’m thinking this may even be a specially set up membership site, but it’s going to take some planning.
@@Alastair_Freebird I think you should. I'm a patron to both Peter and Andy and I'm certainly not made of money. But the way I see it is like this. I really don't care about the extra content I get from being a patron, nor do I expect constant content every week. I would much rather quality over quantity. It's the fact that they have been there and helped me with advice and product knowledge when I've needed it. That has made me better at my job which in turn will make me more money. That's why I'm happy to be a patron. I'm guessing that alot of your viewers are keen to learn like me and we really appreciate the help. No one in any other industry offers advice for free, I just hope your other viewers feel the same.
@@davidgill1716 i
I 100% agree! No need for extra content if you don't promise that from the start . The only thing you might find different is getting more questions from supporters that felt guilty of meithering you beforehand! Thanks for a great video
Congratulations. You are an excelent professional. You solved a lot of problems. Salute from Sao Paulo, Brazil.💚💛🇧🇷
Thank you!
Thanks for your videos, I have watched several. I am working on my own home not going into business, but these are helpful nevertheless. I have a modest budget and the information you have given will help to get the best possible fit & finish within that budget.
Thank you for sharing. It says a lot about a person when they share hard earned knowledge.
manofausagain thanks!
Looks brilliant, mistakes are part of the job. Everybody makes them .
Wish that I could subscribe more than once. Thanks for your generosity.
You’re welcome! What is most helpful to you about my content?
hi mate i am new to your chanel, i love your work and the way you explain what methods you use etc. its great for all the DIYers out there to have a go at home. with your guidance and tips our homes should look a lot better than they do already. keep up the good work mate
i look forward to your next project, regards kevin
kevin benstock thanks very much for the encouraging comment 🙏
Thank you for your honest and detailed video it is very much appreciated 👍
Very nice finish ! Lovely ! Any video to show how you have build the cabinets and the bookshelf ? how long that was taken ? Thank you !
Hi, you will find the most detailed insights into our construction methods from workshop through to installation in our 'fitted furniture apprenticeship' course available here: ua-cam.com/video/WaDJSBjrNjI/v-deo.htmlsi=YQhW21DXVdYPLdnM. the price is reduced if you become a member (then you can cancel at any time). Membership gives you access to a large library of training content.
Thanks Alistair I've just watched this one. I've just made a pair of alcove units with floating shelves above.
Will do them a little differently next time, my scribing could stand improving and the inset hinge idea is one I haven't tried and will try out. I'm thinking it must simplify the way the end panels and scribes go on.
Again, thanks for creating these videos and sharing your knowledge.
I'm not sure I'd even be in business without help from other guys like yourself.
Thanks very much for posting this, really helpful. Can I ask what it is you do to create the stepped effect on the cabinet top please? really great overall effect and look. thanks
Hi! It’s a bearing guided router cutter I think we’ve been using the 6mm T139 here www.wealdentool.com/acatalog/Online_Catalogue_Small_Ovolo_Round_186.html
Enjoying the content on your channel Alastair, binge watched Peter Millard, London Craftsman and working my way through your channel. Started my career as a cabinetmaker in 1994, my father was a Forman Cabinet Maker for 45 years so have the highest appreciation and respect for what you do 👍 One day I would love to start a small domestic fitted furniture business, keep up the great work 👍
Hi! So sorry I didn’t reply sooner. Thanks for watching and best wishes with your own plans
Your videos are really helping me out. Really nice work 👏 👌
Thanks for going through it and sharing your hard won wisdom. Long enough day working and the extra time spent on videoing is appreciated. Happy New Year 2021 from Steven and Matthew.
Thanks for commenting, I always appreciate it! Happy new year to you too
Love watching your builds and process, would really like to see an actual workshop cabinet build and how your process works. Good luck with your plans for growth and thanks, I find the videos very interesting.
Des Brown thanks for commenting! I will try to show more workshop stuff in future
Hi Alistair. Just dropped on your video completely by chance. Loved it, and have subscribed 👍
That’s nice to hear! Thanks
Great video and thanks for sharing some great info. Im based in northwest and have only recently started out on my own and I know very little in business etc compared to you but I think your underselling yourself for quality of product your producing
TotalPrecision Carpenter you mean after looking at my prices you think they could be higher?
@@Alastair_Freebird yes I think so mate.maybe use your prices as a rough guide only? every job different and even now im starting to realise those jobs that going to be issues somewhere and the sometimes awkward customers haha
Excellent authentic thoughtful content. Thanks a lot
Glad you think so thanks!
You may also be interested in www.buymeacoffee.com/Freebird where I am more active now than UA-cam. Also my Instagram page @freebirdinteriors is where I am still posting free content of this sort (in the stories)
Great video great content aimed at people like myself a small business owner. It’s really helpful seeing how others tackle similar work but man you can ramble on!!!
John lennox 😂 to be honest with you, looking back, I’m been surprised how few people have made that complaint! I can’t deny it 😄
Freebird Interiors ps what hinges are you using you brushed past them in the video I like how your filler covers the edge of the unit
Great video mate. I once heard that a hoarder of information and techniques shows insecurity in their own ability. So the fact that you share so much says a lot about you and your business. Quality looks great on these units. Sorry I didn’t get back to you on instagram about the sliding door gear. Been crazy busy renovating my house and hadn’t caught up on your videos lately and wanted to see your UA-cam video before replying.
NenzelMUSIC good to hear from you again! That’s ok. Good thought, thanks, I suppose I’ve instinctively always thought that to be true, and always thought more highly of the experts who were willing to share their knowledge.
Thanks, you explain things really well. I am a maker and get asked to build in units quite a bit but I don’t want to get into the spraying/painting side so don’t usually accept the jobs. Peter Millard from 10 min workshop is very good at built ins also. I will watch your channel with interest.
Craig Peel a lot of makers leave the painting to someone else. For years we hand painted - mini foam rollers and Leyland acrylic eggshell . Paint the boards prior to assembly.
Nice, honest video, thanks for sharing - I'm just a casual DIYer but found it v interesting. Subscribed
Love the idea of having a couple of options. I can design a piece in my head start to finish and even go through the build process but getting that on to a piece of paper as a drawing I fall short on, I have tried Sketchup etc but can't get the hang of it, unfortunately. Luckily I have high standards and customers put trust in me and I dont get any complaints. Am 43 now and really want to start pushing on and getting out of my comfort zone and become more organized and efficient.
sicpac66 there are benefits to going straight from brain to cutting list if it works for you. As long as you are working on your own it’s actually better and more profitable in many ways if you’re skilled at it.
If you do want to learn sketchup I’ve had a lot of feedback that my first 2 tutorial videos are easy to follow. ua-cam.com/video/beA6VuchBkU/v-deo.html
If you want to go for the really high end of the market you are into full solid wood construction where people want to see traditional joinery and very fine finishes on natural woods. You can charge significantly more for that but it also requires a much greater level of craftsmanship and time to produce and is a much smaller market. I was talking to a guy that does super high end kitchens a couple years back and he was showing me pictures of kitchens be built that cost in the £100K and £150K range, beautiful work but they take weeks to construct.
Really appreciate you sharing this stuff. Thank you.
You’re welcome, thanks for commenting
Thank you for your thoughts and insights and the nice work.
Stuart Cairnie you’re welcome 👍
How have I not come across your videos before! Amazing work Alastair. I’m always willing to learn more from the techniques that I use. Brilliant video subscribed and liked 👍🏼
Thanks for going the extra mile and making these videos. I do like your idea on the master class and training, I think that these video are very useful. I am guessing that you do hook up with other Makers, such as Peter Millard, Skillbuilder, Gosforth Handyman and Gid Joiner. It would be interesting to see a collaboration. Lastly on some of your videos you refer to brackets. fixings, common tools etc.. that you use, could you publish some of these links on your channel?
I know Peter, less so the other guys! Ok I will keep in mind to mention where I get some brackets etc in future. Any particular bit of hardware you wanted to know about?
Freebird Interiors, these are the brackets I use www.amazon.co.uk/Shape-Metal-Corner-Brace-Bracket/dp/B00E0FVKBE however the one on your videos have a shorter length on one side say 25mm and 65mm on the other.
More like 10 miles..
thanks for posting this, very interesting, will check out your other posts. Don't know if anyone else could smell tube adhesive every time you showed it on the video?? i'm weird (and have used too much of it!) so maybe just me. All the best.
Lee Barber I think it’s just you 🤣 but have you tried the one that smells like pineapples? One of the many everbuild variants... multistick I think it was called!
Great Vlogs. Great info. Can I ask which Blum hinges you use on your cabinets in this video.Many thanks. Jonathon
I Build thanks and they are the full inset cliptoo ones; ones with integrated blumotion at bottom of door and one without at top, 71B3750 / 71T3750
@@Alastair_Freebird Many Thanks
Thanks again for sharing Alistair great work again stop worrying about your video being too long they are Incredibly useful, I'm always learning from your work
ask234b thanks! I will try to keep what you said in mind and trust my viewers’ attention spans!
As a tradesman who has always been happy to share information - though not a chippy :) - I am very grateful you are sharing this stuff to enable people like me who want to do this stuff for themselves and who enjoy working with wood. Keep up the great work. Dave
I’m glad you find it helpful, thanks!
Hi Alastair, love the channel, just wondered what you use for the "worktop" on the base units? is it still 18mm MDF that's been routed? also what router bit would you recommend? many thanks in advance, Jack.
Thank you Jack! Yes still MR MDF, 22mm these days but at the time of this video I may have been using 25mm
Great video thanks. Interesting to see how you do things.
It looked from the video like you fix your bookcase in temporarily, do the scribes, then pull it out again and pocket screw the scribes on. Is that right? Avoids screws to the inside I guess.
Can't believe you absorbed the cost of birch ply over mdf. It's beautiful stuff but so much more expensive. Do the cabinet edges remain unfinished birch ply when the doors are opened?
Great insight thanks, and compliments on your guitar playing too... 👌🙂
Black Tea One Sugar ah, no that shot shows how the back is fixed to the sides with pocket holes. We actually just glue and pin the scribes on! White wax fill and overpaint the pin holes
Black Tea One Sugar yes unfinished ply edge
Great video! Thanks so much for sharing. I'm going to need to watch it again to understand how the sides of the cupboards go in, as I do mine differently and yours look way nicer! I'm guessing you were pretty knackered at the end of that. Looks fantastic though.
Excellent work . What finish do you put on the birch ply interior ?
Great video bud.. you make it look very easy, would love to see a tutorial on how you actually scribe your trims to make them so neat , that would be a big help. 🤙🏻
Thanks. I show scribing on Instagram quite a lot. Here for example: instagram.com/s/aGlnaGxpZ2h0OjE3ODQ3MTk2Nzc1MzgxNTM5?igshid=1oh43duh10ai1&story_media_id=2425488996903670983
Loving your videos, you explain things very clearly 👍 I am a maker but almost exclusively for my own home, built in wardrobes and an alcove like this in my near future so these are helping my ideas on how to achieve them. Thanks for making and posting the content and I hope you are well during this time 😊
Gerry M thanks for the great feedback and best wishes with your projects!
Great vid - thanks for the insights which as usual are invaluable to me.
Stephen Jeffreys glad to hear it 👍
Hi Alastair, I'm about to try building my own alcove units based on info gleaned through your subscription site and UA-cam videos - thanks again for sharing your wisdom! One quick question - do you seal the birch ply for the base units when leaving unpainted? I'm reading mixed advice about whether this is necessary.
This is definitely advisable and I use to take a lot of flak for not doing so!! (Now we use prefinished melamine)
I just want to say I have been watching many of your videos which has inspired me to push my business this way. I have dabbled in custom built units and still do and find it enjoyable. From the design to the build and watching your videos about sketchup and stuff has made me think to push more into this. So keep up the good work and content
Kind regards Gavin
GLPBuilders
Hi Alastair - thanks for taking the time for putting this together. I am attempting a similar project this weekend and have found your videos super helpful and insightful. If I was in Sheffield I'd have probably given you a call for you to do them! Cheers
Hey you’re welcome and since this comment came in while I was posting a members video here is a direct link since I’m sure you’ll find it interesting! ua-cam.com/video/GmJqVz-C2LI/v-deo.html
Really nice video thank you wish you were based in London.
Great video. I am a carpenter myself and looking to get into making bespoke furniture such as this. Very helpful video and great tips and tricks 👍🏻
Thanks. you will like these other videos:
ua-cam.com/video/Oy7dH-Z9MqI/v-deo.html
(a much less waffly demonstration of alcove techniques!)
ua-cam.com/video/QAm2wvSjSgU/v-deo.html
(Probably my most well received video on the subject, detailing the full process of installation as it happens)
Hello to you,
I’ve subscribed......
It’s a pleasure to hear you talk very honestly about the trials and tribulations of your work.I’ve been a kitchen/bathroom/bedroom fitter for over 20 years,self employed for 15 of them.Whenever you chat about a certain situation or scenario I get taken back to a point in time where I’ve had that exact experience!
It’s a very difficult way to earn a crust sometimes,as we have to factor in so many different eventualities,from tools,vehicle running costs and a host of other things right the way up to actually doing the job.It hurts at this very moment in time being self employed doesn’t it?....especially with no help until June...but we chose our own path!
I’ve seen an awful lot of tradesmen over the years-some of whom talk a great talk,but when you look at the finish of their work...well....
Rest assured,your work is of an extremely high standard.In the 10 years I’ve lived in my house I’ve never had another tradesman to do anything-I’m pleased and proud to say I’ve done the lot.....other than just after storm Clara this year when the flat roofing felt got ripped off.
It turned out he wasn’t a roofer at all...he can only do fibreglass-he did a sensible job,but the mess.....😆😆.The first tool out of my van is my vacuum (Festool CT 22) it’s 15 years old and still spot on-there’s just no need for mess.
You are one individual who’d be welcome to work in my place,you’re honest,capable,conscientious,your work speaks for itself-you’re a first class tradesmen.You also do a pretty nifty job of presenting your videos👍
Don’t let the bastards get you down mate.
All the best.
jonnygunner65 well, if you’re ever looking to hire someone please give me a call!! I really don’t know if we’re going to get through this coronavirus period now. In one months time it looks like we’ll have needed to raid the savings set aside for the workshop move just to stay afloat. If we furlough staff it’s a guarantee of business collapse because other overheads won’t stop. But it’s a real dilemma whether we can/should return to installing in peoples houses right now. Anyway, thank you for the solidarity it’s nice to read a message like this. And thank you for subscribing . Are you aware of the extra member only content at www.buymeacoffee.com/Freebird ? I’m getting a lot of good feedback on it 👍
Why not apply a moulding at the top to cover the gap at the ceiling? Most of my customers seem to prefer that method. Nice job and thank you for sharing.
jerr oukt I have done ones like that. How do you secure it the ceiling? It’s just that a few times I’ve had issues with cracking caulk line at the top. Either the settlement of the weight of books when loaded. Or on one project (not alcove actually but built to the ceiling) the structure of the building seemed to expand and contract seasonally so a gap of 6mm or so would open and close again periodically!
Great vid. How wide do you do your filler piece on the side ?
Hi Jake about 56mm. Full plans available at www.buymeacoffee.com/freebird - it's a steal at the moment and I'll probably raise the price next year
Great videos, Would you be able to do separate videos focusing on individual skills such as an A-Z on 'scribing' & 'caulking' that would be really beneficial before an amateur like me starts a project. Many thanks.
I’d love to. Very difficult to find time these days alongside building a business, my overheads are getting so high. I do post a lot on Instagram stories so have a look there. I know it doesn’t suit everyone however it’s much quicker to upload so I can keep getting the content out there.
I understand, just a thought, maybe as you create more content you could cut those individual skills from existing videos at a later date to make them? Looks like i will have to start using Instagram. :)
@@equin9309 I’ve had exactly the same thought. I now have a huge back catalogue of footage and it would be possible to screen record the archived stories from instagram and create detailed tutorials showing a complete installation process but grabbing details from various jobs over the years. I would love to do this. It just all all takes time:
Here is an example of a ‘story’ on instagram (recorded and uploaded on the fly as I work) which I have saved as a ‘highlight’ (which means it stays as a link at the top of my profile rather than disappearing from view after 24 Hours). I’m not quite sure whether this is viewable without an instagram account, would you mind letting me know? instagram.com/s/aGlnaGxpZ2h0OjE4MDU2NDM5MjkyMjQ4NTI1?igshid=r6or9jmr55zh&story_media_id=2425559325004824422
Wow looks amazing😍 I am currently embarking on this journey. Wanting to build an alcove, and I really want to tear my hair out. I currently have a gas meter and boxinin which makes it all so complicated. Any suggestions🤷🏾♀️
Hi Alastair , I have been racking my brains on something you had shown on a video which I cannot find. It was the hafele insert sleves for adjustable shelves 7.5mm - anyway what i was looking for is or ask you, what jig did you use since all seem to be for 5mm holes. many thanks .
Hi I think I showed them way back in a dark oak library job but also in a more recent Instagram story. We used the 7.5mm drill and punch from hafele. I think in the pat we have used a standard jig but only to punch the point of the 5mm drill as a centre mark for each hole, then following along with the 7.5mm drill manually. More recently we tried it on the CNC with a dedicated 7.5mm drill but had problems with tolerance after painting (I had though the sleeve word work in the hole even after painting but it all got too tight)
@@Alastair_Freebird not sure if you got my reply my computer went awol on me. Any way I had a feeling there maybe some issues, so i am looking at the altro flat bookcase strip , since its mdf not solid wood so i got thinking these maybe better than 5mm holes , here is a link if you are interested. I am sure you have come across the concept .www.ironmongerydirect.co.uk/product/altro-flat-bookcase-strip-1829x19mm-electro-brass-plated-153629
Hi yes those Tonk strips do get round some of the advantages but have a dominating appearance. Sugatsune do a more discrete one call the AP-DM I think which we use sometimes
@@Alastair_Freebird thank you for that bit of info, those ones you mentioned are definitely more discrete, I guess they must be OK for books, I can't see you using them if they were crap.:). These are also narrower at 12mm, the ones I have seen are at 19mm. Seems a good idea, all you need to do is make a channel with a router and screw in, look more professional I think also compared to the 5mm hole way, although depending on the job and person it's for.
Another great video. Interesting that the skirting needed to be smaller in height to accommodate the units. Did the customer say anything about this? Due to this fact it looked as if you butted them up to the other skirting as a scribe would not be possible. How do you find this method?
Hi Adrian, see this video from 30 seconds in for a quick cha about why I moved away from always matching up tall skirtings to standardising on a shorter self-made profile: ua-cam.com/video/GmJqVz-C2LI/v-deo.htmlsi=so9cTWcro1Q1soX-
In summary, I didn't like how tall skirtings raised the overall cabinet height to higher than was often desirable for TV viewing height (or forced me to make silly squashed-looking doors). Tall skirtings also reduced accessible storage space in the cupboard, and often in old houses they were not level from one side to the other. So a shorter moulded skirting that usually butts up to the flat face of the room skirting seemed the most elegant solution, while adding to our production efficiencies (it can be a hassle sourcing short lengths of traditional tall skirting)
Finally, you may find this video interesting where the customer decided to have the cabinets refitted with a taller matching skirting: ua-cam.com/video/iwtkfPP8baY/v-deo.htmlsi=GWqQT-YHMyldip1C
Hi my name is Sean Matthews and I would just like to say I have watched 2 of your videos now and have subscribed to your channel
I love your honest approach and the skill set you possess.
I am also a carpenter/joiner and run a small but growing bespoke carpentry and joinery business in Wales.
I have recently been awarded the title of Screwfix Tradesperson 2020 and have posts that regularly exceed 40k views on Facebook.
I will definitely be following your channel as we seem to have a lot in common especially with making unplanned mistakes and correcting them lol.
A pleasure to watch!
Would love a chat in the future.
Keep up the high standards and hopefully chat soon.
Stay safe
Sean
S.M.Carpentry
Hi,
Lovely job and clear descriptions.
Just a question, how did you build this shaker style alcove’s doors?
Giovanni Fiori hi, Thankyou. I think at this time we were making them as 5 piece doors. Medite MR MDF. 6mm panel. We routed a 6mm groove full length of stile sides, and lengths and ends of rails, and used loose tenons of the same material as the panel
Really enjoy watching all of your videos because of your honesty and detail coverage. Can I ask what do you make the tops from? They seem quite thick for mdf but maybe I'm wrong. Thank you
Kris Ruchomski thanks! 25mm or 22mm MR MDF. I always thought 18mm was too thin, both for rigidity and appearance.
Great video as always 👍🏼 thanks again for sharing your knowledge. Really helps noob learners like me. I wish I had a boss like you, I'd learn so much more. My boss (who won't see this) putting it politely, is hard work!! lol Look forward to seeing your next video.
Chris Moxon thanks. I’m not sure I’m always a good boss, I just communicate best when I’m on camera I think!
Hi, the guys from the “measuring up podcast” recommended you and glad they did. I really found your video useful. Thanks, Michael
MrBishbashbosh2012 I was amazed and pleased at the airtime Peter gave to talking about me, and as he said we’ve been in intermittent contact for some time. I’m glad if you’ve appreciated what I’m doing. Are you at makers central meeting Peter and Andy this weekend?
Unfortunately I couldn’t make it, really gutted, especially as I don’t live too far away (near Stratford-upon-Avon), did you go and meet them?
I am in a point in my life where I need a change in direction. I would love to do what you do but it’s a bit hard when you don’t have the qualifications or experience, so I’m doing as much as I can at the weekends to train myself, using videos like yours. Plus I’m on a tight budget.
Any tips?
MrBishbashbosh2012 no I didn’t make it either! Tips? Don’t do what I do 😆 It has been years of stress and uncertainty and low income!!! I am starting to turn a corner now I think, and on the positive side there are aspects I really enjoy, including YouTubing about it all, but I still fluctuate between being fired up for the challenge and (very often) just longing for the stability of a normal job and not always living on the edge of another underpriced job or costly mistake!!
I would have loved to work for a decent amount of time in someone else’s business, in a well equipped workshop. I would recommend that to anybody (but not easy to get into) before launching too soon into your own business.
Freebird Interiors hmmm well that’s what I worry about under pricing a job, I really need to know how long everything will take me to do. At the moment I am working on our new dining table, add me Add me as a friend on UA-cam! youtu.be/addme/azIsLXkjfJu0vstVrezqIB4gZs6HvQ and I will send you a photo. I am just trying to master inlaying bow ties but having issues some of which I am unsure how to get through, have you done them?
Subscribed about 1 month ago. I'm a joiner by trade, but now purely install sash Windows daily. Love your content. Nice to see how other trades install there work
👍🏽 lets grow your channel
Jez D thanks. Interesting to hear from different people who appreciate the content. Yes please help get the word out! Did you decided that specialising only in sash windows was a good business move?
Freebird Interiors Just wanted to simplify my day to day jobs. Work for sash company at mo, maybe one day own my own
Please let me know when you do secret doors. Many thanks
astrokier I’ll be honest, it’s very unlikely I remember to let you know, if I ever do them! What sort of secret door are you thinking?
Great vid - just a DIY enthusiast but really helpful
Great to see people sharing their experience. Very helpful to younger tradesman
OfficalRossMcintyre glad you appreciate it, thanks for commenting 👍
Thanks for sharing if I could find decent traids on UA-cam in my area I would use them if I could watch a few videos on there methods it gives confidance espeshaly if there willing to show the world and take comments. You are churning out a quality product.
What a great videos, thanks for sharing these tips, they are very helpful. 👍🏼
MrGizbod glad it helped!