just amazing...started at 8pm and is now 1am...I've just done it...I've get a new backlight on my Korg 01w...Thank you a million times!!!! I've sandwiched my new backlight as there is room enough to do it...just cut the previous leads from the wasted backlight and it was all good...once again thatnk you so much for doing all this amazing vídeo and brings us all 01w users 'back into the light'...
"A few lines are missing" That happens if you disassembled the display. It isn't necessary to open the display. After unsoldering the two pins of the old foil just take a cardboard or a stripe of harder plastic (a better idea is to take an old backlight foil). Put it under the old foil until you can pull out the old foil. Take the new foil and slide it carefully under the screen. Justify and solder it and make a test if it lights in the right place. It askews very often and needs to be fitted once or twice.
just fixed it! what a relief... I simply disconnected the disk drive which had shorted and voila! everything back to normal, i will just use midi to manage the sounds
Yep my backlight is out. also be good to replace the two power supply filter caps because they go bad and leak. also, on mine the transformer whines. Indra says something about put glue or epoxy inside the transformer to fix the loose windings due to dried out core. Otherwise, my 01w/proX is in good shape and works.
Hi, i commend you for taking the trouble to make and upload this video. I have 2 01/W's. I've serviced my keyboards many times thru the years, so i've developed my own techniques and routines to service the board. First i would never put the board flat on it's back like that, i always put books or similar on the 4 corners on the keyboard, in a way that doesn't touch anything (keys, buttons or joystick) just to provide enough support so suspend the keyboard.
Thanks for the video. I just ordered the backlight and I'll forge ahead. One other question would you have any idea why only the B flat keys on the right hand side of the keyboard would stop working? Thanks again
If you watch this: DON'T replace the backlight, but the whole screen. A new screen is like 25 bucks, not much more than a new backlight, and it comes with several benefits: - Now you can get FSTN instead of STN screens, for better contrast and viewing angles - Now they can be white on black or black on white. - You can disconnect the power circuit for the backlight, which has a nasty high pitch whine - Procedure is much easier: no disassembly of the panel itself required.
You needn't to open the hole display. You can unsolder the foil and slip them aside out of the display. If you do so you don't miss any lines at the display. I changed several displays of Korg T3, Yamaha SY77 and a Korg 01W. It isn't necessary to open the display housing.
If your backlight is thin enough, you can slide it over the old backlight. You just have to desolder and clip the old leads and add some insulation to the clipped lead part of the old backlight. Sometimes the original backlight it double sided taped to the lcd board and is very difficult to remove. Sliding in the new backlight over the old one is much easier and safer. You can also get whole led lcd upgrades with ribbon cable preattached. The display will be bright and high contrast and will last for a long time.
But how come you don't show that method in the first place? It's a good video. I think it just needs that. You can also get plug and play backlights with the plug attachment.
This looks similar to my i3 and I was hoping the sound would come back after I replaced the battery. At least the display is brighter now but could you give me some advice on what to check? It was fine a coupla years ago. Thanks in advance.
Hi PATA571 I have a T1 and a 01 W Pro X. I changed the battery on the Pro X. Turned it on, and all was fine. Shut it down and turned it on again, and then a capacitor blowed of in the floppy disk.I bought a new floppy disk, and installed it in the Pro X. When I push the "disk " button, it says: "Drive not ready". Then I took the floppy from the T1. Then it says : " Data error". When I format the disk ( with the floppy from T1 installed ), and now only this disk it can read.
The 01/w pro x seems quite different to disassemble than any other..and tricky! I got a slight baptism looking at and following a YT vid addressing how to replace the cr 2032 batt. Heavy, awkward, you have to face it down on 2x4's..or books, and get the bottom plate off (later, in writing this, it occurred to me you dont take the plate off, just 4 or five screws that release lifting the top up). My floppy doesn't work. Can I get any help with how to get at it and diagnose the problem>? Also, how to fix the 2 bottom white keys that are dead. Thanks, crisinbigbear(california) PS: It would be so much easier if the top covver just lifted up, instead ofg having to deal with screrws underneath, and, oh yeh! it just came back to me that it is only 4 screws holding the bottom plate there IN THE MIDDLE that have to be removed..taking out others only creates more prob's!
yes, the ProX is a beast. I personnally know anything about it. I would expect (IMO) you can find a DD floppy drive replacement, maybe even a HD floppy drive. I may have seen some forums on the subject somewhere. I saw a replacement drive on Reverb.com for $40USD, . This site indra.com/~cliffcan/01fddfix.htm has a lot of info you may need.
I love 01W sounds.I bought 01W which display lcd is already spoil.only can see some vertical lines on lcd.do i need to change back light only?or need to replace whole display module?Where can I order it? pls help..sorry for my poor english..special thanks..
It sounds like your display is bad. The backlight only determines how bright it looks. This web site seems to have information that might help you. indra.com/~cliffcan/01disp.htm
Hi patpatpat999, and thanks for the answer. Unfortunately it did not help to adjust these parameters. Under the keys is a kind of a touch-sensitive switch, and I have to press very hard to activate it. I was hoping that there was a possibility to adjust the pressure sensitivity. May be the only option to replace the switch....? Best regards,
Baskerwille: I have no idea want went wrong on your floppy drive. Floppy Disks: They are DD (720kB), not the common HD floppy that we all had before they went extinct. Also they must be formatted in the KORG format, not windows. See the link in the video at 1:20 they have lots of info on this.
Thanx for posting this because I realise I probably need someone else to restore my display. It went dimmer and dimmer but I found I could still read it ok, close up, but then last week it hot very flickery and now just shows completely blank apart from the right side third being just black. I don't know if it's just the display or the workings. I bought it new in 1993 and my written sequenced tracks sound great but without a display obviously I can't load them. The single & combi sounds are there but I can only scroll up one at a time from the default first one and anyway I only use the sequencer facility to write backtrax. So.. I need someone to fix/repair it if possible please - I'm in Hampshire England. And thanks for reading.
John Danter It’s sounds like your display may have failed, not just the backlight. I would try the Korg website to find authorized dealers or repair facilities.
Re: Korg 01/Wfd power supply unit. I intend to replace the display backlight,I wondered if you discharged the capacitors in the PSU before starting the job? How long do the caps take to discharge any ideas?
No, I did not discharge the capacitors. And I don't recall how long my unit was off. Most power supplies should have some kind of high-value bleed off resistor that will eventually bleed off the voltage. On power supplies like this I don't worry about it. the worst thing is is I'm gonna get a little Shock and drop it on the floor. I have discharged 3000 V from some capacitors in a microwave radio power supply. That hurt.
Thanks for this video pat!.... my dear 01/w failed today, no smoke but very nasty smell and no display or sound but a click in the headfones when i power on and off. Opened it, power supply ok (checked voltage). fuses ok. Capacitors seem ok, no bulge or visible signs of burn anywhere... Does anybody have some suggestions? Cheers
SORI,,,,I got a tad confused as you were actually "re-assembling" your O1W and I never saw you actually remove the unit step by step...however, I did learn a few other things from your video.. I was also a little confused when you posted : "WARNING: LCD will probably not work if disassembled as shown!" :D
On the O1, try GLOBAL button then PAGE+ to page 5. On that screen are VELOCITY and AFTER TOUCH curve parameters. I don't know, but see if these make a difference. I assuming you know the difference between Velocity and After Touch. Good Luck
...To PATA571..continue.. Do you have any idea about what could be wrong ? The floppy disk I bought was a standard disk. Is the floppy disk to Korg special ? When I look at the large plug on the floppy, there is missing a " leg" on the new floppy, and this is how all new standard floppy disc looks. Do you know where to by parts for Korg ? Best regards
Hi, Thanks for upload this video. I have a question about the velocity. I have a T1 and a 01W ProX. The velocity on the T1 is very "light" but on the 01W ProX I have to press very hard at the key to get the effect. Is it possible to set the sensitivity ?
U hae a Yamaha QS 300 which the lcd display does not work anymore. the backlight went on it years ago and now the whole lcd doesnt work anymore after trying to service it. I was told by someone that the Korg 01w is the same lcd as the Yamaha QS300. Is this correct? Can anyone tell me where i can get a replacement lcd, not just backlight? Cheers.
Milton Alexander I’m not sure what you were asking. I’m not familiar with the M1. But I think they all use normal screws and no special screwdriver is required.
I can only find a used part on eBay (www.ebay.com/itm/Korg-X50-LCD-Display-/153456624015) $60 U.S plus shipping. Some have fixed this problem by unplugging the 2 ribbon connectors on the display and plugging them back in. Also clean the electrical contacts on the ribbon cables and the sockets they plug into with electronic contact cleaner . There are many kinds, here is just one (www.wd40specialist.com/products/contact-cleaner/). Good luck.
hi my name is jesse. the problem started with faded screen light. keyboard will turn on. I bought the complete computer screen 200.00 replaced it and all combo sound erased. got a floppy disk from ebay with sounds. inserted and still no sound. any suggestions please.
Jesse Martinez The original sounds it came with should still be there. Any new combos you created may be lost. My video for battery replacement on this unit should get you sounds back. If your battery is dead you will need to re-initialize the unit every time you turn it on or plug it in. Not sure which. If this is the problem, you need to replacement the CR2032 battery inside.
Oh, and one last thing, never ever put anything on top of those key contacts, not cables, connectors, anything. Those spring leafs can get damaged easily. They are without doubt the most vulnerable and fragile part of the synth. As you also shouldn't, in any case, do work on the keybed or replace keys with that board attached. In fact that board is the first thing you should disconnect and put aside when servicing, and the last thing to put back when assembling the synth.
missing lines from the display at power are caused by a bad contact of elastomers of the display. It 'a problem solvable only if under the backlight are laid two strips of double-sided tape, and if you shut properly display the tabs of generating the correct pressure dul backlight In addition, it is extremely advisable to make a display test before reassembling all the tabs to take preventive action on the problem identified ..
Hi,my 01WFD,display died,show nothing after,using exteernal orchestral card ,previosly shows chatakters.but in dark no idea what can I do?does anyone sugest solution?. any differents betwen LCD and EL backlight where can get original LCD there on ebay EL Lamp electroluminescent panel backlight ( led alternative for Korg 01/ W)long from Hong Kong who has experience with this thanks
Second i would never touch the boards inside with my bare hands because of static electricity that can easily ruin a board or a chip. I always use latex gloves when i mess with the boards inside. Call me obsessive for doing this, but i've never had anything that did not worked when i assemble everything back. I just don't take risks with my boards when servicing. Of course it may take more time but it's safer in my opinion.
Sorry, I thought it was obvious. At the 11:00, you've removed the display unit. Throw it away and stick a new one in. assuming you can find a new one anymore.
@@patpatpat999 Thanks for the reply mate. Assuming that a new display always will come with a backlight in it I thought; ok the backlight is being replaced, so conclusion: the display did not need to be replaced:)
@@patpatpat999 still questioning: did you replace the display in this video? If so, did you get the 20 pins cable included when you ordered the new display? If not, how did you replace that cable?
@@northerndutchspearhead1331 At 11:10 you may note that the ribbon cable connector is soldered to the display board. I don't remember, but I believe the cable will uplug from the display (14:15) It came with my display assembly. Mine came from Japan, so I believe it was pulled from a Korg for parts. I don't know if you can get these anymore. Hope that helps
le linee mancanti dal display alla sua accensione sono causate da un falso contatto degli elastomeri del display. Problema risolvibile solo se sotto al backlight vengono poste due strisce di nastro biadesivo e, se si chiudono bene le linguette del display generando la giusta pressione dul backlight Inoltre, è estremamente consigliabile effettuare un test del display prima di ri-assemblare tutto per intervenire preventivamente per risolvere un simile problema....
just amazing...started at 8pm and is now 1am...I've just done it...I've get a new backlight on my Korg 01w...Thank you a million times!!!! I've sandwiched my new backlight as there is room enough to do it...just cut the previous leads from the wasted backlight and it was all good...once again thatnk you so much for doing all this amazing vídeo and brings us all 01w users 'back into the light'...
01 Welcome 0:00:14
02 Cover installation 0:01:23
03 Main board installation 0:02:08
04 Jack P.C.P intallation 0:03:09
05 Power supply installation 0:03:20
06 P.C.P support plate installation 0:05:05
07 Foil shield installation 0:05:40
08 Floppy drive installation 0:06:33
09 Keyboard installation 0:07:45
10 Joystick panel installation 0:08:20
11 Support rail installation 0:09:08
12 Panel P.C.B. Installation 0:09:51
13 LCD / Backlight installation 0:11:02
This is awesome. I haven't used my board in a few years. Sounded nice but it was getting harder to see. Thank you so much.
"A few lines are missing"
That happens if you disassembled the display. It isn't necessary to open the display.
After unsoldering the two pins of the old foil just take a cardboard or a stripe of harder plastic (a better idea is to take an old backlight foil). Put it under the old foil until you can pull out the old foil. Take the new foil and slide it carefully under the screen. Justify and solder it and make a test if it lights in the right place. It askews very often and needs to be fitted once or twice.
just fixed it! what a relief... I simply disconnected the disk drive which had shorted and voila! everything back to normal, i will just use midi to manage the sounds
Thanks for this video! I have a new backlight for my 01R/W that I intend to install, so I found your video very useful.
Yep my backlight is out. also be good to replace the two power supply filter caps because they go bad and leak. also, on mine the transformer whines. Indra says something about put glue or epoxy inside the transformer to fix the loose windings due to dried out core. Otherwise, my 01w/proX is in good shape and works.
Hi, i commend you for taking the trouble to make and upload this video. I have 2 01/W's. I've serviced my keyboards many times thru the years, so i've developed my own techniques and routines to service the board. First i would never put the board flat on it's back like that, i always put books or similar on the 4 corners on the keyboard, in a way that doesn't touch anything (keys, buttons or joystick) just to provide enough support so suspend the keyboard.
Thanks for the video. I just ordered the backlight and I'll forge ahead. One other question would you have any idea why only the B flat keys on the right hand side of the keyboard would stop working? Thanks again
Sorry, I do not know.
This site may be able to help: www.justanswer.com/electronic-musical-instruments/dbj60-certain-keys-not-playing-korg-going.html
If you watch this: DON'T replace the backlight, but the whole screen. A new screen is like 25 bucks, not much more than a new backlight, and it comes with several benefits:
- Now you can get FSTN instead of STN screens, for better contrast and viewing angles
- Now they can be white on black or black on white.
- You can disconnect the power circuit for the backlight, which has a nasty high pitch whine
- Procedure is much easier: no disassembly of the panel itself required.
You needn't to open the hole display. You can unsolder the foil and slip them aside out of the display. If you do so you don't miss any lines at the display.
I changed several displays of Korg T3, Yamaha SY77 and a Korg 01W. It isn't necessary to open the display housing.
If your backlight is thin enough, you can slide it over the old backlight. You just have to desolder and clip the old leads and add some insulation to the clipped lead part of the old backlight. Sometimes the original backlight it double sided taped to the lcd board and is very difficult to remove. Sliding in the new backlight over the old one is much easier and safer. You can also get whole led lcd upgrades with ribbon cable preattached. The display will be bright and high contrast and will last for a long time.
True nuff. It’s in the video if you watch the whole thing.
But how come you don't show that method in the first place? It's a good video. I think it just needs that. You can also get plug and play backlights with the plug attachment.
Baraka Bashad.
This looks similar to my i3 and I was hoping the sound would come back after I replaced the battery. At least the display is brighter now but could you give me some advice on what to check? It was fine a coupla years ago. Thanks in advance.
Hi PATA571
I have a T1 and a 01 W Pro X. I changed the battery on the Pro X. Turned it on, and all was fine. Shut it down and turned it on again, and then a capacitor blowed of in the floppy disk.I bought a new floppy disk, and installed it in the Pro X. When I push the "disk " button, it says: "Drive not ready". Then I took the floppy from the T1. Then it says : " Data error".
When I format the disk ( with the floppy from T1 installed ), and now only this disk it can read.
The 01/w pro x seems quite different to disassemble than any other..and tricky! I got a slight baptism looking at and following a YT vid addressing how to replace the cr 2032 batt. Heavy, awkward, you have to face it down on 2x4's..or books, and get the bottom plate off (later, in writing this, it occurred to me you dont take the plate off, just 4 or five screws that release lifting the top up). My floppy doesn't work. Can I get any help with how to get at it and diagnose the problem>? Also, how to fix the 2 bottom white keys that are dead. Thanks, crisinbigbear(california) PS: It would be so much easier if the top covver just lifted up, instead ofg having to deal with screrws underneath, and, oh yeh! it just came back to me that it is only 4 screws holding the bottom plate there IN THE MIDDLE that have to be removed..taking out others only creates more prob's!
yes, the ProX is a beast. I personnally know anything about it. I would expect (IMO) you can find a DD floppy drive replacement, maybe even a HD floppy drive. I may have seen some forums on the subject somewhere. I saw a replacement drive on Reverb.com for $40USD, . This site indra.com/~cliffcan/01fddfix.htm has a lot of info you may need.
I love 01W sounds.I bought 01W which display lcd is already spoil.only can see some vertical lines on lcd.do i need to change back light only?or need to replace whole display module?Where can I order it? pls help..sorry for my poor english..special thanks..
It sounds like your display is bad. The backlight only determines how bright it looks.
This web site seems to have information that might help you.
indra.com/~cliffcan/01disp.htm
Hi patpatpat999, and thanks for the answer. Unfortunately it did not help to adjust these parameters. Under the keys is a kind of a touch-sensitive switch, and I have to press very hard to activate it. I was hoping that there was a possibility to adjust the pressure sensitivity.
May be the only option to replace the switch....?
Best regards,
При смене подсветки, новую ставить нужно сверху или старую убрать? разбирать или нет LCD для замены подсветки ? у меня ничего не получается
Baskerwille: I have no idea want went wrong on your floppy drive. Floppy Disks: They are DD (720kB), not the common HD floppy that we all had before they went extinct. Also they must be formatted in the KORG format, not windows. See the link in the video at 1:20 they have lots of info on this.
Thanx for posting this because I realise I probably need someone else to restore my display. It went dimmer and dimmer but I found I could still read it ok, close up, but then last week it hot very flickery and now just shows completely blank apart from the right side third being just black. I don't know if it's just the display or the workings. I bought it new in 1993 and my written sequenced tracks sound great but without a display obviously I can't load them. The single & combi sounds are there but I can only scroll up one at a time from the default first one and anyway I only use the sequencer facility to write backtrax. So.. I need someone to fix/repair it if possible please - I'm in Hampshire England. And thanks for reading.
John Danter It’s sounds like your display may have failed, not just the backlight. I would try the Korg website to find authorized dealers or repair facilities.
What do you mean by saying the 'LCD will not work if disassembled as shown'? Is it wrong? How shold I do?
Re: Korg 01/Wfd power supply unit. I intend to replace the display backlight,I wondered if you discharged the capacitors in the PSU before starting the job? How long do the caps take to discharge any ideas?
No, I did not discharge the capacitors. And I don't recall how long my unit was off. Most power supplies should have some kind of high-value bleed off resistor that will eventually bleed off the voltage. On power supplies like this I don't worry about it. the worst thing is is I'm gonna get a little Shock and drop it on the floor. I have discharged 3000 V from some capacitors in a microwave radio power supply. That hurt.
What would you do to get the C button on the sequencer workstation on the Korg 01-W to release? it is stuck in the down position.
Sorry, I don't know. I sold my Korg to a collector a few years ago.
This site may be able to help.: www.justanswer.com/electronic-musical-instruments/dbj60-certain-keys-not-playing-korg-going.html
Thanks for this video pat!.... my dear 01/w failed today, no smoke but very nasty smell and no display or sound but a click in the headfones when i power on and off. Opened it, power supply ok (checked voltage). fuses ok. Capacitors seem ok, no bulge or visible signs of burn anywhere... Does anybody have some suggestions? Cheers
SORI,,,,I got a tad confused as you were actually "re-assembling" your O1W and I never saw you actually remove the unit step by step...however, I did learn a few other things from your video.. I was also a little confused when you posted : "WARNING: LCD will probably not work if disassembled as shown!" :D
Yea, it's not the greatest but I figured something out there was better than nothing.
@@patpatpat999 hello if the sounds and rhythms on the screen spontaneously problem in sensor or display?help me
@@rashidshukurov5227 Sorry, I cannot understand the translation.
Thnx for the info Ric F.!
friend you sell the display keyboard korg 01wfd ? And what is the price?
On the O1, try GLOBAL button then PAGE+ to page 5. On that screen are VELOCITY and AFTER TOUCH curve parameters. I don't know, but see if these make a difference. I assuming you know the difference between Velocity and After Touch.
Good Luck
Hi! where can I get the display with the backlight to buy?
@@noelwilliams853 google “Korg 01w spare parts”. Good luck
Será possivel arranjar um display da Boss DR-880???
...To PATA571..continue..
Do you have any idea about what could be wrong ? The floppy disk I bought was a standard disk. Is the floppy disk to Korg special ? When I look at the large plug on the floppy, there is missing a " leg" on the new floppy, and this is how all new standard floppy disc looks. Do you know where to by parts for Korg ?
Best regards
Hi, Thanks for upload this video. I have a question about the velocity. I have a T1 and a 01W ProX. The velocity on the T1 is very "light" but on the 01W ProX I have to press very hard at the key to get the effect. Is it possible to set the sensitivity ?
krog o1w power supply to the screen v?
U hae a Yamaha QS 300 which the lcd display does not work anymore. the backlight went on it years ago and now the whole lcd doesnt work anymore after trying to service it. I was told by someone that the Korg 01w is the same lcd as the Yamaha QS300. Is this correct? Can anyone tell me where i can get a replacement lcd, not just backlight? Cheers.
can that floppy disk be exchanged for a usb port? That way a memory stick could be used instead of disk...
No idea. I doubt it.
+Michael Sweglar Maybe this will work? www.ebay.com/itm/Floppy-Emulator-for-Korg-01w-01wfd-/251648653046?hash=item3a976db6f6:g:s9cAAOSwPe1UGZm9
use simply a knife in the last operation to unscroll the back light !!!easy and much more secure for the data screen !!!
I used the new backlight to poke/slide the old one out.
Thank you
Minute 3:54 Looking for screwdrivers to open my korg M1 and saw this, can you please tell me what brand and model is the screwdriver?
Milton Alexander I’m not sure what you were asking. I’m not familiar with the M1. But I think they all use normal screws and no special screwdriver is required.
my korg x50 display is blinking . How to fix it ? Please give solution. If i have to change the lcd where to get ? Please reply ...
I can only find a used part on eBay (www.ebay.com/itm/Korg-X50-LCD-Display-/153456624015) $60 U.S plus shipping. Some have fixed this problem by unplugging the 2 ribbon connectors on the display and plugging them back in. Also clean the electrical contacts on the ribbon cables and the sockets they plug into with electronic contact cleaner . There are many kinds, here is just one (www.wd40specialist.com/products/contact-cleaner/). Good luck.
hi my name is jesse. the problem started with faded screen light. keyboard will turn on. I bought the complete computer screen 200.00
replaced it and all combo sound erased. got a floppy disk from ebay with sounds. inserted and still no sound. any suggestions please.
Jesse Martinez The original sounds it came with should still be there. Any new combos you created may be lost. My video for battery replacement on this unit should get you sounds back. If your battery is dead you will need to re-initialize the unit every time you turn it on or plug it in. Not sure which. If this is the problem, you need to replacement the CR2032 battery inside.
My korg Triton Le just started the problem of changing sounds by itself. especially when playing. is anybody has an idea of the problem?
Oh, and one last thing, never ever put anything on top of those key contacts, not cables, connectors, anything. Those spring leafs can get damaged easily. They are without doubt the most vulnerable and fragile part of the synth. As you also shouldn't, in any case, do work on the keybed or replace keys with that board attached. In fact that board is the first thing you should disconnect and put aside when servicing, and the last thing to put back when assembling the synth.
applaus
missing lines from the display at power are caused by a bad contact of elastomers of the display. It 'a problem solvable only if under the backlight are laid two strips of double-sided tape, and if you shut properly display the tabs of generating the correct pressure dul backlight
In addition, it is extremely advisable to make a display test before reassembling all the tabs to take preventive action on the problem identified ..
Hi do you fix keyboards? I have the korg 01w fd
haytevoy1 Sorry, no.
Hi,my 01WFD,display died,show nothing after,using exteernal orchestral card ,previosly shows chatakters.but in dark no idea what can I do?does anyone sugest solution?. any differents betwen LCD and EL backlight where can get original LCD there on ebay EL Lamp electroluminescent panel backlight ( led alternative for Korg 01/ W)long from Hong Kong who has experience with this thanks
Second i would never touch the boards inside with my bare hands because of static electricity that can easily ruin a board or a chip. I always use latex gloves when i mess with the boards inside. Call me obsessive for doing this, but i've never had anything that did not worked when i assemble everything back. I just don't take risks with my boards when servicing. Of course it may take more time but it's safer in my opinion.
Ok thanks
If you watched the whole video. That's what I say also.
Are you friggin kidding me? All that to get to the back light?
just looking at this gives me diarrhea , .....But thanks for the help video.
Am I missing something here?! The title says "Backlight & display replacement. But I only see a backlight replacement!!
Sorry, I thought it was obvious. At the 11:00, you've removed the display unit. Throw it away and stick a new one in. assuming you can find a new one anymore.
@@patpatpat999 Thanks for the reply mate. Assuming that a new display always will come with a backlight in it I thought; ok the backlight is being replaced, so conclusion: the display did not need to be replaced:)
@@patpatpat999 still questioning: did you replace the display in this video? If so, did you get the 20 pins cable included when you ordered the new display? If not, how did you replace that cable?
@@northerndutchspearhead1331 Correct. I f**ked up a perfectly good display
@@northerndutchspearhead1331 At 11:10 you may note that the ribbon cable connector is soldered to the display board. I don't remember, but I believe the cable will uplug from the display (14:15) It came with my display assembly. Mine came from Japan, so I believe it was pulled from a Korg for parts. I don't know if you can get these anymore.
Hope that helps
muito bommmmmmmm
le linee mancanti dal display alla sua accensione sono causate da un falso contatto degli elastomeri del display. Problema risolvibile solo se sotto al backlight vengono poste due strisce di nastro biadesivo e, se si chiudono bene le linguette del display generando la giusta pressione dul backlight
Inoltre, è estremamente consigliabile effettuare un test del display prima di ri-assemblare tutto per intervenire preventivamente per risolvere un simile problema....
Why u did the video like that this is mess up you didn't start from the beginning
I explain why in the video. Be helpful. Find a better video and give everyone a link.
NO. No professional keyboard has internal speakers.
does the korg 01/w fd has internal speakers??? thank you all
I think this video is backwards
Exactly, as stated in the video, 1:05
Good morning donde puedo conseguir wl remplaso de la pantalla para mi teclado
Nececito repara la luz se mi koeg 01w fd
Exelent👍
Hi all, I'm selling my Korg. It's listed on Reverb.com, if you're looking for one.
hola
wrong way :D
by the way it is a korg 01wprox
Jesse Martinez The X version was 88 keys. Mine is 76