Coolest subwoofer build out there, by far. Wasn’t sure what it was at first but glad I stuck around for the whole video. Excellent details and explanation, a lot of similar subwoofer videos out there but this one stood out
Well it's probably more like a ported box but the enclosure is around the outside in the square. To be fair, the bass head in me would make the same size box with 2 x 15 and 4 x 8 or something lol.
brother i am not going to lie this was one of the best build i seen because the way you show thing and the and scene was funny and same time i learn some thing thanks brother
Didnt realize how small your channel was. As I was watching, I thought for sure you would be a 50k+ channel. Wouldnt have even noticed had you not said something! Awesome build
Jeg havde allerede den gang min dayton ultimax um18-22 i en 250 liter kasse med port. Den bruger jeg. men jeg har den inde under mit skrivebord ikke sat til. Men vil sige at jeg synes det er tæt løb. Den spiller dybt og klart og højt nok til de fleste
I thought initially it was going to be plexiglass around the edge with the window. But then I realized it was the woofers inside. There was a thin gap between the inner and outer walls which housed the airspace. How much airspace is there in this box design? I like it a lot!
I don`t remember airspace in cubic feet or liters. Calculateted for a tube design but it should have been bigger than it is. The stuffing should help though. :) Thanks for the commet
bro thats badd af... is it a passive bandpass?? how much air space is there for those drivers? dude im blown away at the quality of the video and the box build but bro your creativity is second to none!!! keep building and doing videos and I promise you sir you will get a couple UA-cam silver and gold play buttons!!!
Cable around the center steel rod is not a great idea. As it's only 2 loops the effect power is very low but with each bass boom it's a degausser just on top of a magnet :-)
@@mustbuildsomething and also I would have put the common on the amp, not on one speaker (speaker --- amp --- speaker, not amp --- speaker --- speaker) because the first part of the cable borrows the power for 2 speakers. And the lenght of the cable from the amp is doubled for the second speaker so a greater loss of power and a little dissimetry between speakers. But all these are so small details that there is no audible differences, it's just my OCD 😀
@@frederichardy8844 I totally get that. :) I wired them so that on driver gets plus first and the other minus so the current should be timid and equally distributed 😂 i wired them in parallel, not in series ass i wrote 🙃😀
It's gotta be the ugliest sub woofer I've ever seen... I thought it was a joke to start with 🤣😂🤣..!! The passive radiator should be mounted vertically not flat by the way .... the reason being that the mass load has gravity pulling it down and it presents added diaphragm stiffness when it moves up !! This causes non linear displacement!!
This was fantastic. I had never considered building a box like that. Very unique, really creative.
Coolest subwoofer build out there, by far.
Wasn’t sure what it was at first but glad I stuck around for the whole video. Excellent details and explanation, a lot of similar subwoofer videos out there but this one stood out
Thank you for your awesome comment
I was so confused at first then I was like ohhh sweet a bandpass with a passive radiator. Enginious! Got a sub here for sure!
Thanks I did try to make it a little different😂
Well it's probably more like a ported box but the enclosure is around the outside in the square. To be fair, the bass head in me would make the same size box with 2 x 15 and 4 x 8 or something lol.
brother i am not going to lie this was one of the best build i seen because the way you show thing and the and scene was funny and same time i learn some thing thanks brother
Im am so happy you learned somthing, thanks appreciate it. 😃
@@mustbuildsomething thanks brother
Awesome build! Love that you built it so the drivers are visible, very cool. The TB's are wired in parallel of course 🙂. Thanks
Thanks you for watching and the comment 😃
Love the music, zoning out listening to the classical and the nail gun
Thanks. Nice you notice haha
Didnt realize how small your channel was. As I was watching, I thought for sure you would be a 50k+ channel. Wouldnt have even noticed had you not said something! Awesome build
Thank you that`s really nice of you to say 😀
16:09 In series you get 8 Ohms, they are connected in parallel :-)
You are right sir 😅
awesome video dude, it was really enjoyable to watch . totally loved it. left thumbs up, hope you can drop the hammer with some bass now lol
Thanks means a lot that you liked it😀 I can now lift the mini hammer..... soon😅
Incredible. you are a true craftsman
Thanks 😃i still have some way to go though 😉
Build quality 👍
DUDE pop filter on mic ..but i love your idea a active band pass with passive radiator ..not a fan of passive radiators normally
Nice build!
Thanks 😀
Wow I was wondering why you needed the faces to be so rigid! This turned out amazing! Wish I could hear it
Subbed at going a little bananas 😂
Thanks I try to go bananas always.. Thanks for the sub😁
Looks cool but wouldnt it even be way better if u put those 3 chassis into a closed box?
awesome build 👏 first time to see a setup like this.👍👍👍
thanks 👍
pretty sure you wired them in parallel and not series, great build tho!
you are right, sorry 😉
This an awesome build and design.
Thanks :)
Excellent workmanship , congratulations Palle 👍
Thanks Poul
that is a unique subwoofer. good work🔨
Thanks 😅
Bruger du den stadig i dag? 2 år efter, eller har du erstattet den med noget andet? Og hvilken response har den såten ca.?
Jeg havde allerede den gang min dayton ultimax um18-22 i en 250 liter kasse med port. Den bruger jeg. men jeg har den inde under mit skrivebord ikke sat til. Men vil sige at jeg synes det er tæt løb. Den spiller dybt og klart og højt nok til de fleste
I thought initially it was going to be plexiglass around the edge with the window.
But then I realized it was the woofers inside. There was a thin gap between the inner and outer walls which housed the airspace.
How much airspace is there in this box design?
I like it a lot!
I don`t remember airspace in cubic feet or liters. Calculateted for a tube design but it should have been bigger than it is. The stuffing should help though. :) Thanks for the commet
@@mustbuildsomething I appreciate the reply and love the design. Not something I've seen before..
Perfect.......💯
Did u try to seal a side ??
Wow bro Great peace of engineering!!!
16:07 rly nice build:) series 4+4=8 :p
you are so right they are wired in parallel ;)😅
What do you mean by reverse polarity? The woofers should push the radiator both same way!
The drivers back function as the front side of the cone so they are both in reverse 🙂
amazing video
Thanks
I like the idea of this project. It's opposite and we all see the drivers in motion inside (outside). 🤣🤣
Yes that was my exact idea, i like to watch mechanics 😀thanks for watching😉
Pretty cool. Check out Steve Meade's tower build videos to see this done to the extreme.
Este canal merece muchos mas suscriptores ... Ahi va la mia y la de mi esposa aunque no quiera. Por el marro de Thooooor!!!
Thank you, I got 99 problems but the wife`S not one😉
I like it,so unique 👍
Btw got u a sub. Ur doing great.
bro thats badd af... is it a passive bandpass?? how much air space is there for those drivers? dude im blown away at the quality of the video and the box build but bro your creativity is second to none!!! keep building and doing videos and I promise you sir you will get a couple UA-cam silver and gold play buttons!!!
nvm I seen in other comments that you dont remember the air space! all good great job again im so impressed!
Thanks for the comment. the air space was calculated like a ported design though on the smaller side 😀
LOVE IT
Cable around the center steel rod is not a great idea. As it's only 2 loops the effect power is very low but with each bass boom it's a degausser just on top of a magnet :-)
Great input didn`t think of that 😀 normally its like 800 years do you think im still good for like 20? 😀
@@mustbuildsomething yeah, probably more, that was really just for the fun 😀
@@mustbuildsomething and also I would have put the common on the amp, not on one speaker (speaker --- amp --- speaker, not amp --- speaker --- speaker) because the first part of the cable borrows the power for 2 speakers. And the lenght of the cable from the amp is doubled for the second speaker so a greater loss of power and a little dissimetry between speakers. But all these are so small details that there is no audible differences, it's just my OCD 😀
@@frederichardy8844 I totally get that. :) I wired them so that on driver gets plus first and the other minus so the current should be timid and equally distributed 😂 i wired them in parallel, not in series ass i wrote 🙃😀
Informative. keep it up
Thanks for watching and i will :)
You could stop blowing in your mic or use a pop filter. Good thing wanting to build a subwoofer but try not destroying ours.
BTW, u got 👍 and subscription:*
This video look like asmr
Thanks 😊
WOW WOW WOW WOW 😱😂
😀
Where can you find that Amp at?
i think it is discontinued. but Parts Express sell a lot of different plate amps. If you are in EU I think Sound Imports is great :)
Like like 👍🦎
Thanks
I watched the whole video and in the end all I was left with was a big WHY?
It was an idea. So i tried it out 😉
fair enough@@mustbuildsomething
I got to be the thousandth like 👍🏼
Крутоо 👍👍🇺🇦🇺🇦✊
It's gotta be the ugliest sub woofer I've ever seen... I thought it was a joke to start with 🤣😂🤣..!!
The passive radiator should be mounted vertically not flat by the way .... the reason being that the mass load has gravity pulling it down and it presents added diaphragm stiffness when it moves up !! This causes non linear displacement!!
Thanks for the comment 🙂
ù
Nailing the plate amp in the box not a good idea I will say he is skilled enough to do a clean job but there is a few whoopsie daisy's in there IMHO
Winisd! is useful,no need to play with the weights
Interestingly useless build, a very low output subwoofer, especially giving its size!
OB dual opposed with PR waste of time and resources.