Yamaha Zuma Not Running for several Years. Can We Get It Running? Let's make it zoom again!
Вставка
- Опубліковано 10 лют 2025
- Let's make a Yamaha Zuma zoom again. In this vidoe we will get it running with a bit of a surprise problem at the end. Later we will reassemble, fix the front brakes and go for a rip.
Amazing video to this day just got a 03 or 04 bws abt to open my first 50 cc up
Thank you for watching.
@@RaymoreRepair do you know anything about the zuma leaking 2 stroke if you top it off too full?
I got a 2017. Not a single issue in 7 yrs. 4 stroke. Fuel injection. Liquid cooled. Perfect scooter. 9,053 miles. Starts in 2 seconds everytime. Cold rain or snow.❤
Great tutorial, the camera was always at the right point.
I just looked it up on Ebay. The seller on mine was boiler-boy. Thank you for watching.
That is so funny! I bought a used Spree years ago that didn’t run. I took it al apart, cleaned everything spotless and checked everything but it just would not fire…… same exact thing, the muffler was completely plugged with mud daubers nest. As soon as I discovered that, it fired up next try.
It happens more than you would think. Thank you for watching.
Awesome video. Thanks
Thank you for watching.
Thanks for this video!
Thank you for watching.
What kind of socket set are you using? I've never seen any like those!
Thank you for the video. I have been chasing an issue with my little Zuma - It soaks the plug within a crank or two of trying to get the scooter started. I have pulled the bowl to make sure the float wasn't sticking but it was fine. I rode it last year and the year before. Maybe some starting fluid or take the carb completely off and run new gas. Any ideas would be appreciated.
Perhaps a sticking float. Thank you for watching.
Mine has the same issue
Thanks for the video
You are welcome. Thank you for watching.
Thanks so much for showing this to us .. This is super helpful to me.. You may have mentioned it, but what was the brand of the top head kit you are installing?? Is it a 50cc??? Thanks again.
It is a 50cc kit purchased from Ebay. Not sure of the brand. I just looked for one that had good ratings. Thank you for watching.
Did you have to do anything to the fuel tank? I have a 2003 zuma that has a lot of build up and such in the fuel tank. I just wanted to know what you did with that part. Also how long did that one sit for?
No the girl tank was good. No rust or junk in it. Thanks for watching.
I take my fuel tank and load it full of BB's and shake the crap out of it with carb or break cleaner in it then renice it with clean no acholic fuel and give er a go
I have a zuma 50 and it was running then it would run for a bit then stop. Now it crank but wont fire or run. Ideas??
Carburetor. Check spark.
In Aus they are a beewee, bws100 or yw100, our zumas were 50cc , shitty little yamaha bikes, the yw's are really good bikes and fast , few variator weights and a exhaust they really come alive , I ride big bikes but loved my 100 beewee
Thanks for watching.
Hey ,how are u doing?
Just wanted to know how its doing now cause i just bought the same kit for my yamaha neos for the same reason too no compression. Let me know
This thing is still running just fine. It mostly runs around camp grounds and gets hauled around on a motorhome. I think he said he has put about 300 miles on it. Thank you for watching.
parts are a bit of an issue now days I have a 2010 last year of the two stroke and I can't find some of the parts they just don't make em anymore
You are right obsolescence of parts is a problem on many things I work on. Thank you for watching.
I just paid $400 mins sits too long.
Drove it home and now won’t start
Is gas tank rust an issue
Says it’s rusted and added a fuel filter?
Well it won’t run and now back to shop? $$
Where I live there is a radiator shop that will remove all the rust and then treat the tank. Yes rust in the fuel tank will be a problem. Thank you for watching.
Why not clean the bike first before opening up and stripping carb etc?? Easier to fit rings before fitting piston.
Shoulda cleaned it. Thank you for watching.
MY 2008 THE PUSH BUTTON DONT WORK WHAT COULD BE WRONG
IS IT START.
I would first check the brake light switch since it will not start without that. Thank you for watching.
@@RaymoreRepair I just replace battery I found that the positive terminal is missing a fuse what fuse number goes there and what does it do
After I replace battery I hear a click noise but it still don’t start up
@@wahkitng4505starter or solenoid typically. You can test it by jumping the solenoid.
Note: No Sound, clicked away 😢
I will check on that. Thank you for watching.
No sound, Volume, Video= 0
no sound !
I'll check that. Thank you for watching.
You are QUIET
Great video otherwise!