Sponson AOA & Rear Ski Full Setup Shrimp Rc Outrigger - Flycolor 90a, Rocket 2969 4000kv
Вставка
- Опубліковано 30 вер 2024
- SHRIMP OUTRIGGER (AKA) SUPER-CLAD
Dancing Wings Hobby B061 RC Outrigger Shrimp Boat Wooden 495mm Sponson Race Boat Kit Without Shafting & Rudder a.co/d/2WXauE5
SETUP
ROCKET 2968 4000KV BRUSHLESS MOTOR
OSE/FLYCOLOR 90A ESC
www.offshoreel...
4mm to 4mm COLLET
POWER HD MICRO SERVO
www.offshoreel...
70mm RUDDER ( cut down to 60mm)
www.offshoreel...
4mm STRUT & FLEX CABLE
www.ebay.com/i...
Thanks for Watching Ironclad Rc Tinker test and tune everything rc
Personal contact information ironcladedout@gmail.com
You're a good guy. Helpful and sharing the hobby.
Second comment, i am also gonna build the same copy
Thanks so much Bigb, this is what the hobby is about helping each other. You're a legend mate.
Happy to help
NEW BOAT FOR BIG B
Hell of a good setup Big B !!! and that’s why I’m here, I do not subscribe to any rc content provider who is so arrogant as to exclaim they will not reveal their set up as if he knows something others don’t and all else in his content is of such importance.
16 thousand plus subscribers can’t be wrong, keep it coming big and for all the small and big details you have offered over the years I will be sending you a free brand new hydroplane hull from OSE plus two motors and ESCs 👍👍👍 BGFL ( I will email you this evening )
I share what I know in hopes of helping others achieve their goals in the boating hobby. I appreciate all the support over the years and the generous offer. If you send it, I will build it. Thanks
Thanks for the info! Enjoy your videos… would you please give the all up weight with a 3 cell. Also when you say negative or positive angles on the shaft , is it up or down from horizontal?
966 grams with the 3s 2200, 1000g w/4s 2200. Negative is down, positive is up position on the strut
Looks !ike my Ion hotliner...glider OBG sheeting overfoam it's cracked in several places But just won't slow down....
That thing is insane lol 👍👍👍
Held together with bubble gum and duct tape
What size prop are you using ?
3816
Thank you I'll try and send a pic of mine
For the specifications above, what size propeller do you use?, i am from indonesia🙏
I used a tfl 3619 for a while, for speed 3814 high rake. I use abc props mostly
Salut fais attention de ne pas dépasser 88mph sinon il va retourner vers le futur 😁😋😜👶🛴🇨🇵☀️
Lol, classic 🤣
If the guys just do their homework on whatever boat they have they'll see thatall the tips and secrets are already on your videos. When I built my shrimp boat I followed a lot of your setup. But not all of it. It ran great until a fish sank her, yep a fish sank her. My son is rebuilding his shrimp boat and this video is perfect for him to rebuild it right. Thanks big b. Bg4l
I remember when you told me a fish sank your shrimp! Fish love shrimp 🍤 bummer you couldn't get it back.
@@IRONCLADRC yeah it was orange with metal flakes, looked just like a fishing lure😆
Hey Big B, not so easy to match your speed let alone beat it.
I just bought a 90 amp flycolor esc just because it’s what your running.
I tried the 100 ztw but it’s temporary peak amps is only 120 amp I have had no luck getting any real speed with it 103 kmh so far is all.
I’m thinking the flycolor has over 500 peak Amps and it’s bigger but no heavier. Having said that, I believe your secret sauce is absolutely every little thing including your cut down self modded prop.
My shrimp is a carbon fibre copy of yours my total weight is quite a bit lighter than yours and still I’m almost 20 mph slower.
My ecomaster is longer at 26” and it gets 84.5 mph but that’s cheating to go longer.
There is a guy in Europe getting 148 kmh but I tried to get him to build me one but he wanted $1800 usd .
His prop is like nothing I have ever seen.
I have to say the chase makes it so much fun.
Thank you mate for your help and your trial and error that produced this little beauty rigger.
She's definitely not pretty, but it makes up for its beauty in speed..
lol. I think my next rigger will be the zipkits fe26 did some shopping, you can basically build that boat for around 250 bucks give or take.
@@IRONCLADRCI had one they are a great boat they corner like they are on rails. They fit a 32/3300 mah lipo 100 c lipo no worries. I never tried to go for out and out speed but mine did 120 kmh and had pretty good run time with a 3200 mah 100 spektrum lipo and a tp2940 (2968) 3000 kv too low a kv for speed. I had a dasboata ABC H5 (4515) prop 120 amp Seaking pro esc.
I hit a cruiser out the front of my house at full speed and lost it in 25 feet of water.
I sent a diver down to search for it and never found it.
@@IRONCLADRCthe fe26 is beauty. I sunk my pride fe26 hydra xlx, 8s, tp4080 svm 2400kv, custom dash boata prop. I got 114mph in a very small area but didn’t get the chance to really open it up as I flipped it and I had a mate watch it while I went got recovery boat and he was not watching it l, I tried a net in that area for hours but he had no clue where it sunk so it will be forever on the bottom. Was so dis-heartened with riggers after that. They are very expensive in Australia. It cost $240 usd just in postage cost for it.
@@phase3uteman 114 mph that’s is worth saving up for another.
I was going to initially. But I was disheartened about the thing sinking and the time and money I put into it. I brought a zonda now. Got it too 101mph with poor batteries. Mind you I’ve sank this twice , once fit it back 2 weeks after it sank through a Kyak and bet and 2nd I had plenty of flotation. So easily retrieved m. Only thing is the hatches. Lost two and there not cheap. It’s off the water because of no hatch atm.