2005-2010 Honda Odyssey Passenger CV Axle | No Exhaust Removal
Вставка
- Опубліковано 10 вер 2024
- This Honda Odyssey is getting a new passenger right side cv axle. The manual wants you to remove the exhaust but I show you how to remove the cv axle without removing the exhaust.
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoff...
🛒PARTS LIST:
▪️ CV axle: amzn.to/3HW9dF2
▪️ Dielectric grease: amzn.to/3HDPTMw
▪️ Anti- sieze: amzn.to/42wZ2QS
🛒TOOLS NEEDED:
▪️ Axle socket set: amzn.to/3HNfxOZ
▪️ Breaker bar: amzn.to/42eP7Pq
▪️ Electric ratchet: amzn.to/3Sw4W12
▪️ Flashlight: amzn.to/48OaGJi
▪️ Impact socket set: amzn.to/3Hy3fKi
▪️ Impact wrench: amzn.to/3Sfmiht
▪️ Prybar set: amzn.to/3IkSlWw
▪️ Screwdriver set: amzn.to/4b6BZ39
▪️ Socket and wrench set: amzn.to/4b6K8ob
▪️ Torque wrench 1/2: amzn.to/3AgaOB2
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk. - Авто та транспорт
One of the FEW who can explain
a procedure a Normal person will understand! Congrats.
Also, no added B.S. to ramp up minutes.
I've subscribed.
I ended up having a really easy time and I didn't even need to get under the car. I pulled the inner boot off, pulled the shaft itself out, and scooped out the grease and bearings with a rag. This left me with essentially a cup that I needed to pull out. I put the hook of my chain over the lip, I had a feeling it might work, I knew it would slip right off, or it would work where the harder I pulled the harder it gripped. I worked almost too easily, I stood up, let the chain go slack, it didn't fall off or anything, then I gave the chain one tug tight, not even hard, more as a test to see if the hook was going slip off or not, and clink, it popped right out.
Awesome video! Especially, the size of each socket! Major time saver! Thanx again
Thank you for the video 👍
Oh man your video help a lot thanks man
Thanks buddy.
Buen trabajo!
EXCELLENT. Quick clear and good visual clarity. Right to the point. You truly are a Pro! Thank you Sir.
Damn my axle is not sliding off. I'm trying to hit it with the pry bar like you did but it's not budging.
Mine isn't either. Any luck?
@@every_thing_wood1251 no luck but I also haven't tried anymore sense.
@@PDillz do you still need to get it off?
@@every_thing_wood1251 yes lol it's not blown out all the way just yet
Very good!
GREAT VIDEO!!!!
Been fighting mine for about 3 days now new part won’t go in or out.
😁
My only question is: you used anti-seize for the outer spindles, do I use the same stuff to lightly grease the inner mount? (Referring to 4:26)
Otherwise this was a perfect video! All steps shown clearly and described cohesively!
Anti-seize works well 👍
thanks! which parts you use? Genuine or 3rd party?
These are aftermarket parts from the local auto parts store.
What's the labor time for that
Around an hour and a half
What if the axle is stuck?
Stuck in the transmission or stuck in the knuckle?
@@ValleyMobileAutomotive stuck in the transmission for me
@@every_thing_wood1251 Usually a pry bar in between the transmission and CV axle is enough to pop it out. But if not they have an attatchment for a slide hammer you can rent both the tool and hammer from the parts store. Just tell them what you're struggling with and they'll set you up with the right tools.
@ValleyMobileAutomotive yea the pry bar did nothing for me. I ended up pulling one side of the axle and the boot slid off from the transmission side. So I took the axle itself inserted it into the transmission side, and put 2 vice grips on the sides to not let it slide out. Then I just yanked on the axle about 4 or 5 times and it popped right out like nothing. This was causing such a headache, and this worked FLAWLESSLY!
@@every_thing_wood1251 Awesome! Cool trick. Sometimes we gotta get creative 👍