Really enjoy your work. I watch on u tube TV and it doesn't allow for comments or likes so have to go to phone to add likes and or comments. Please keep up the good work.
Thank you very much, I've made my coon boards using your videos and I was just about to buy coyote boards cause I couldn't find a good video on how to make them.
Could you do a series on making boards for all of the different species? There isn’t a lot of details about the sizes of boards for different animals out there.
Good how to Stu! Been using them exact boards for years and have had a lot of top coyotes at auction with them! The FHA/Nafa boards are too wide in the neck/shoulder area! Ryan5911 made these boards. A coyote snaring king!
Another great video. Then I looked up how much to just buy one because I don't have all the tools you do and yeah I'm going that route haha. I love the DIY idea though and I'm sure yours will last a long time.
Great great video i have been looking to make my own coyote boards and alot a videos aren't very clear and confusing. Thank you so much for showing how you do your coyote boards .thanks for continuing to share your knowledge great stuff
Awesome video I like the older one because I don't all these tools. I found two basswood trees on my property going to make a bunch of boards this spring.
Nice video Stu if you could help me I was watching your old videos and you used an airgun do you now how much FPS does it have. I know it has nothing with the video. But I'm getting in trapping.🇺🇸🐺🐺🐺🇺🇸
Stu you didnt give the measurements of the board to do the curves to be able to cut and make it narrow at the shoulder ..i will like to see the sizes so iI know how to cut thanks lots ex video
I enjoyed your page and work iam new at it I would enjoy boards like u have could u send me the size of them all u have animals thank u Shane Revette [ Revette's Wildlife Skullworks ]
@@mattmaly5085 Stu doesn't seem to answer any comments. He never even answered my question on where he got the accent. But it ain't from the mid-west where he now resides. I was just curious anyway.
Really enjoy your work. I watch on u tube TV and it doesn't allow for comments or likes so have to go to phone to add likes and or comments. Please keep up the good work.
This is the first video of yours thats been in my feed for a couple weeks. Thought you were on a break from UA-cam. But nope UA-cam just being UA-cam.
GREAT VIDEO! I needed this information and of course you delivered brother. You are my favorite trapper on u tube. Thanks yet again!
Now that I,ve sseen it I might tryit myself, always good to learrn something.
Great video, finished board looks like a 6 foot long 300 H&H Cartridge.
Thanks for sharing 👍 I need to make some forsure
Thank you very much, I've made my coon boards using your videos and I was just about to buy coyote boards cause I couldn't find a good video on how to make them.
Where’s this video for the raccoons?
Another very informative video. Now all we need is a thermal coyote hunting video and a how to on drying the pelt on the board.👍🏻
Thanks for video. Been needing to make these forever.
Great Video, as always, very informative! Thanks!
Great information there’s not very much information about making drying boards out there
Great video , thanks for sharing!
Always enjoy your videos
Could you do a series on making boards for all of the different species? There isn’t a lot of details about the sizes of boards for different animals out there.
Yes I second this!
A similar one for a fox would be slick.
Good videos........like your style. Keep up the great work.
Fantastic video! Thank you!!
Love working with wood, gonna have to give these a try
Ryan 5911 board design out of Saskatchewan
Thank you so much for making this video
Love your videos thanks for sharing
Good how to Stu! Been using them exact boards for years and have had a lot of top coyotes at auction with them! The FHA/Nafa boards are too wide in the neck/shoulder area!
Ryan5911 made these boards. A coyote snaring king!
Good information CC
Thanks for sharing, Beautiful job
Always great videos thanks again for your time and knowledge on theses videos 💯💯💯💯👍🏽
Another great video. Then I looked up how much to just buy one because I don't have all the tools you do and yeah I'm going that route haha. I love the DIY idea though and I'm sure yours will last a long time.
Great looking job you can tell you are a carpenter ,you enjoy working with lumber.
Nice boards
This was different! I didn't know if you had wedges to set on hooks for hanging them while drying, let alone brain or kitchen spice tanning
Very informative video that you made today. Keep up the awesome videos and work you do.
Great great video i have been looking to make my own coyote boards and alot a videos aren't very clear and confusing. Thank you so much for showing how you do your coyote boards .thanks for continuing to share your knowledge great stuff
All of his videos are great and in awesome details.
Same boards I make and use thanks Stu
Great info.. I agree about turning the yotes.. That way I KNOW all is well and I can pay special attention to any problem areas..
Very good and informative i enjoy it.
Nice job.
I would like to see boards made for skunks and possums
Great video. Nice step by step tutorial!
Great video! I suggest using a cardboard template so you don't have to keep measuring.
Great video. I have the same home made stretchers and they work good
Awesome video I like the older one because I don't all these tools. I found two basswood trees on my property going to make a bunch of boards this spring.
great video,,good job!!!
been hoping for this video Stu thank you, now I got a summertime project if lumber prices come down
Thank You!
nice job. did coon boards with basic tools.
Just curious , do you make a wedge for for the center to pin the tails to .
Do you open the tails like you do coon with coyotes? I so how do you do that with an adjustable stretcher?
Make a template so you can mark out pattern then use a jig saw and pattern router bit to speed up production
Nice video Stu if you could help me I was watching your old videos and you used an airgun do you now how much FPS does it have. I know it has nothing with the video. But I'm getting in trapping.🇺🇸🐺🐺🐺🇺🇸
👍👍
Closin’ in on 90 grand Subbies!!
.........subbies ?????
@@mattmaly5085,
Subscribers.
Stu you didnt give the measurements of the board to do the curves to be able to cut and make it narrow at the shoulder ..i will like to see the sizes so iI know how to cut thanks lots ex video
Could you have used the other board for your new board pattern?😊
He wouldn’t be 5911Ryan would it be ? Lmao that’s who’s videos taught me back in the day
Who was the guy from 🇨🇦. I have seen these boards before
I enjoyed your page and work iam new at it I would enjoy boards like u have could u send me the size of them all u have animals thank u Shane Revette [ Revette's Wildlife Skullworks ]
I'd rather see trapping. Or even ice fishing.
Seriously
@@mattmaly5085 Stu doesn't seem to answer any comments. He never even answered my question on where he got the accent. But it ain't from the mid-west where he now resides. I was just curious anyway.
I followed this channel because of a suggestion from 330Maniac. I'll unsub and not listen to him again.
I also use this design and picked it up from the same guy as you back in the day. Ryan 5911 on UA-cam. They work very nicely!
6 mins before you touched a board.
I came up with 28 seconds.
👍👍👍