How to Remove Fuel Tank Ford Maverick

Поділитися
Вставка
  • Опубліковано 28 сер 2024
  • In this video I show how I removed the fuel tank in my 1971 Ford Maverick
    The carriage bolts were rusted out so removal may differ on yours
    Here are the replacement parts I will use
    Fuel Tank: amzn.to/2XauMeI
    Fuel Tank Straps: amzn.to/2X9SQhK
    Fuel Filler Pipe to Trunk Seal: amzn.to/3bOCDCQ
    Fuel Tank to Pipe Seal: amzn.to/2JFD6LO
    Fuel Sending Unit: amzn.to/3aKrZwX
    Fuel Tank Vapor Separator: amzn.to/34h6aCD
    EFI Fuel Pump Kit: amzn.to/2JDPDPB
    Brass hammer: amzn.to/3aKgRQC
    If you have any questions, comments, tips, or recommendations comment down below. Like and Subscribe and thank you for watching!
    For business inquiries: maverickwerks@gmail.com

КОМЕНТАРІ • 19

  • @jmankrohn3241
    @jmankrohn3241 Місяць тому

    That is original I have the same. Thanks for the vid btw, been having trouble with trash pulling through to my fuel pump. Had to buy a new tank and replace the whole thing. But yea that's original. Mines a 72 maverick.

  • @That77mav
    @That77mav 17 днів тому

    Thanks for this video

  • @Merc72_707
    @Merc72_707 4 роки тому +6

    Comet and maverick are exactly the same, awesome vid man

  • @alanwolf4199
    @alanwolf4199 4 роки тому +2

    Thanks bro 👍

  • @Lobo23464
    @Lobo23464 3 роки тому +1

    Thank you very much for the vedio im getting ready to remove my 72 comet looks like the same format I'll keep you posted

    • @shinobi1kenobi75
      @shinobi1kenobi75 3 роки тому

      How did it go? I'm gonna be dropping and cleaning the tank in my 75

  • @JoseMartinez-ro4kr
    @JoseMartinez-ro4kr 4 роки тому +1

    Good vid bro!! Keep pumping them out!

  • @josephhumphreys4485
    @josephhumphreys4485 3 роки тому +1

    Rust is the enemy!

  • @owennelson2460
    @owennelson2460 Рік тому

    Can you remove the neck without removing the tank. My tank is good but the neck has an issue.

    • @maverickwerks
      @maverickwerks  Рік тому +1

      It may be possible but tough to remove the neck without lowering the tank, the neck on mine was a pretty tight fit into the tank seal

    • @owennelson2460
      @owennelson2460 Рік тому

      @maverickwerks671 awesome thank you. Also do you know how to get the gauge cluster out I took out the screws but it still doesn't want to give and I don't want to break anything.

    • @maverickwerks
      @maverickwerks  Рік тому +1

      Yes you have to unclip the speedometer cable, I was able to get my hand through the ashtray slot (removed ashtray cover and ashtray metal tray first) its a really tight fit and you will scrape your arm up for sure but once you get your hand on the speedometer cable you'll feel where it mounts to the guage cluster

    • @owennelson2460
      @owennelson2460 Рік тому +1

      @@maverickwerks great thanks so much

  • @crisrivaz
    @crisrivaz 4 роки тому

    Is it possible to use a 70 mustang sending unit?? For the ford maverick?

    • @maverickwerks
      @maverickwerks  4 роки тому

      I believe it will fit but be aware of the reading being slightly off due to the tank size difference and the connection will vary as well, maverick has a 2 post connector and mustang has 1 post. So you will likely have to run the signal wire to the sending unit and ground it elsewhere

  • @recklessgaming2568
    @recklessgaming2568 3 роки тому

    I have a 1970 is mine different? U said 71-77

    • @maverickwerks
      @maverickwerks  3 роки тому

      Yes it will be different, yours will probably be a tank that doubles as the trunk floor