H163 Bluetooth Hack (Change device name, PIN and add USB Storage)
Вставка
- Опубліковано 5 вер 2024
- On this project, I did the following modifications on an H163 Bluetooth device.
1) Change Bluetooth device name
2) Modify pairing PIN
3) Modify audio connector
4) Add usb drive
Hope you'll learn something, let me know what you think.
Please support my channel by giving me a thumbs up and your subscription.
Thank you.
MARVELOUS. Great Tutorial!
Awesome!!! Thanks for the educative video
tried searching many times dito lang pala kay kabayan makaka kuha ng info.. slamat po.. anyway tanong ko lang po kung change name lang ng Bluetooth name meaning ang need lang po ay mag read ng eepron and edit some hex file then save tama po ba?
Muy bueno gracias por compartir
It would be great if you could share how you did it.
How do you remove the "ready to pair" or "the bluetooth device is connected successfully"?
still exploring that one, wan't it gone as well...
I have same device.
When I connect or disconnect it speaks the aler.
Is it possible to stop these speaking notification ?
same problem f**king scary!
thanks
can you remove the voice prompt from Bluetooth
how to change the "bluetooth device is ready to pair"message?
How can i disable the auto power off?
My BT 163 is not working and also get heat up when plugged
And the indicator light is also not working
Friend I have a bluetooth that you used in the video and I also have an arduino How can I just rename the bluetooth using the arduino?
Hi man, I would like to use H163 with multiple devices, but every time I have to unpair it first. Is it possible to set it to pairing mode every time it is powered up? Thanks
Hi TheEngineerIsIn !
Is it possible to rename "any" device with that method ?
I would like to 'hack' a JBL Go to rename it.
Thx for the tutorial.
Hi Julien,
By principle, yes. It's just a matter of knowing how to read & modify the settings used by the device.
But it really depends on what type of controller is used. I've seen ASIC type chips on some devices for which I can do nothing since no data sheets are available.
But if it uses a separate device (usually a common 24Cxx eeprom) to store device settings, for sure it can be modified.
Thanks for your time.
woowoo !
Thx A lot for your work and informations.
Need this for an artistic hack project ;)
if interested in ? ->
FB : facebook.com/3x0c3t/
Instagram : instagram.com/3x0c3t/
Bravo. Well done
bro. i have blutooth devise withought audio jack. so plz help tell me. how to connect BT to sound audio pin
if it has a speaker, then follow the speaker connections and connect it to the pins of the audio jack. you might have to use an audio jack with built-in switch so this will automatically disable the speaker if you connect an audio plug to the jack. You may find this link useful regarding audio jacks
www.cui.com/blog/understanding-audio-jack-switches-and-schematics
thanks
Mine insists on playing mono from both my laptop and android phone - driver update and going through all the settings didn't cure it. Any ideas?
i think it has to do with hardware and not drivers and firmware, that is why "true stereo" BT devices are expensive. Cheap devices doesn't have a duplicate the hardware to process stereo signals. Given that, hardware modification will not be practical.
@@theengineerisin9778 My thoughts too.
Hey you could buy cheap bluetooth earphones from aliexpress. They usually use a chip that supports stereo audio
What's the code you used?
Hi.. i just want to bypass pin / disable pin "0000" , what the software i have to use
But PIN 0000 is the "disabled" state, generally you don't have to type it when it's 0.
Baka po may apps na pwede para mabago ang bluetooth name
Code?
Aaaaaaaaaaaah which software you used aaaaaaaaaaaah
sorry, english is not my native language. perhaps you can do better. i'm just trying in order to help people with different languages. thank you for watching. i'll try and do better next time
Pinoy ka pre?
yes kabayan :)
Can we use it like a Bluetooth model for arduino
Hi Creative Saini, this device is not pratical to be used as an arduino module. First up, the only pins you can use is the UART interface which only communicates with the controller memory & not the EEPROM. I suggest using ESP modules with available UART & I2C interfaces. Not sure though if the name is directly editable using arduino libraries but you can use the same method to modify the eprom contents of the ESP modules as well. I hope this answers your inquiry. Keeping my comments as short as possible, thanks :)
TheEngineerIsIn ok
Aaa aaaa aaa aaaa aaa. Are you masajing
not really...just asian and i'm trying. sorry if i disappoint your expectations, guess you speak better :)
Aaaaa
WHY YOU ONLY SAY UUUUUUUUUHHHH
sorry mate, english is not my native language but i tried so i can help more audience. thank you for dropping by, i'll try and do better next time