Cracked Dashboard Fiberglass Repair Painted Candy Brandywine BOX CHEVY CAPRICE HOW TO RESTORE DASH
Вставка
- Опубліковано 24 кві 2020
- Check Out My Latest Video Here: "How To Install Box Chevy Caprice Bumper Impact Strips - 1987 LS Brougham Bumper Cushions Installed"
• How To Install Box Che...
-~-
Ms. Ruby / Southern Chevy Tv LS Swapped Box Chevy Caprice LS Brougham Dash Restoration Painted Candy Brandywine
Visit spraywaycustoms.com for New & Used Spray Guns & Parts
Southern Chevy Tv CHANNEL= / 228chevyboxryder
Complete step by step process of fiberglassing a dashboard for ChevyBoxRyder / SouthernChevyTV LS Swapped Box Chevy Caprice LS Brougham. The dash pad had a lot of cracks from years of wear and tear but that's what comes with restoring Old School Cars. Thanks for the support.... SprayWayCustoms
#CrackedDashboardRepair #SprayWayCustoms #BoxChevy #HowToFiberglassDash #DashboardRestoration #CandyBrandywine #HowToSprayCandyPaint
You can use the same process to
fiberglass dash
fiberglass speaker box sub box
fiberglass rear deck
fiberglass center console
fiberglass tweeter speaker pods
fiberglass kick panels
fiberglass pillars
fiberglass bumper
fiberglass spoiler
fiberglass hood scoop
Endless possibilities - Авто та транспорт
Here's A Video Of Fiberglass Supplies To Get When Fiberglassing ua-cam.com/video/spw6BGPdjbg/v-deo.html
My favorite SprayWayCustoms Quote "I'a Cut Chu Back On" Lol, I say it all the time now lol!
🤣🤣🤣Thanks man
Facts man!!!😂😂😂😂
I do it so much now my wife and kids saying it. It’s how I get off the phone now! lol
@@SprayWayCustoms how much for dash board job
Me too man! I love it! 😆😆😆
I see sprayway pop up I click! 🐐
That's what's up 👍🏾👍🏾
@@SprayWayCustoms you do a he'll of a job.i want to try it out when I get the courage u make it look easy!!
Bruhhhh I gots to take my damn 🧢 off to you, you a bad man, good at and take pride I. What you do! It’s a lot of prep and patience that goes into what you just done! 🎯 🎯 Keep bring the 🔥🔥🔥 #stayhumblestayprayedupstayouttheway ✌🏾
The OG has spoke
Salute to the Box Chevy OG....you paved the way and inspired a lot of us 🤝
Like I said before like a fine wine that just keeps getting better with time the art of protection
I meant the art of perfection
Thanks Chandler
Hey man I tried to hit you up about a dash and the server said no address found
I figured it's about time for me to give you some props. I've been watching you for a few years now you be throwing it down my brother.
I know I have a lot of supporters who just watch and never comment. I appreciate you all 🤝
This video hit different-- this felt like a classic Sprayway video...good job my man...
Thanks G7. I really appreciate all your support
That looks killer brother nice work
Thank you PHARRAWAY
Man that finish is like glass!
Thanks sinformant
13:50 😂 🤣 “if you try to do this by hand.... you’ll give up fiberglassin “ You ain’t never lie.. SprayWay All Day 💪🏾
This was straight from the heart truth bc ever since the first few videos especially the ones he did on the purple doors, so much work was put in hell the video was over an hour and was done in real time. With fiberglassing if you don't have the patience it won't get anywhere. He just make it look so easy too. Big props to SprayWayCustoms💯💪💪💪💪
That's a fact...it takes a lot of patience
🤣🤣
Got my pizza and soda im ready for this epic movie 💪🏾💪🏾 man im speachless awesome job family!!
Thanks for all the support family
SprayWay is a poet in that paint booth, Another master piece!
Thanks family
Only you can sand to “We are the world” and get away with it! Hahaha you best my man! Another amazing tutorial! Thank you SprayWay!
🤣🤣🤣thanks Scott
Straight beast with it. Amazed everytime the outcome of every project you tackle. Keep up the good work fam 💪 💯
Thanks Mike
Sprayway you keep putting these out and my dumb ass gon try to do mine. Y'all pray for my Chevy
I'm here if you ever run into a problem 🤝
@@SprayWayCustoms Do u have a number or some to see if u could custom my interior ?
Ms. Ruby is going to be singing a totally new song by the time you are done with her. Very well done!!!
🤣🤣🤣Thank you
🤣🤣🤣 trying to sand that by hand you'll give up fiberglassing!!🤣🤣🤣 Truth!! Lol..Haha. Man your tutorials are great big up's to ya sprayway. 👍😎
Thank you Kevin
I'm so glad your videos came up as a recommendation
Your work is a piece of art
You taking drab to fab like it ain't no thing
I'm glad you gave me a shot
Spray I have used an air DA for decades but I saw your PorterCable electric DA and I bought one at the Depot. It’s great! Variable speeds and heavy duty brand name. Much more comfortable then the air tool and a lot less hassle!! Thanks for the tip!!!
I know. I never use my air DA unless I'm wet sanding. I've been using the same Porter Cable for 6 years and it's still ticking like day one with no problems. You'll see it in every video going to work 💪🏾
I'm binge watching your videos one after another. Beautiful work man!
Greatly appreciated
That's so nice how you fix broken dash boards and make them look new . With your personal touches. So Cool ...
Thanks John
This is what happens when you cross an artist with a magician. Perfection as always!
Thanks
Shots out to “RONDO✊🏽amazing product sprayway 💰
Thanks 🙏🏾 Rondo the Boss
I have been watching hours of your video, serious skill, work ethic and pride in workmanship. Big fan now
Thanks for the support
That is pretty cool a good alternative to recovering because these days it’s getting tough to find traditional dash restoration
I agree with that Mike
Love the process bro. I feel you on trying different methods / doing it different all the time.
Yes, I never do one dash the same. I'm always switching it up.
Wow! A lot of work and that came out beautiful! You are the Candy Man!
😃Thank you
Thank you spray way for showing me a lot of things I did not know watching your episodes teaches me a lot I was not into automotive like that until I seen the things that you do that makes it easier thank you for your education
Glad to help
That dash was so hurt it was a reject from the junkyard cuz you can't recycle foam I'm sorry i had to crack on it keepingit real you did a very good job thank you for protecting the planet
Thanks Ramon
Man, another work of art!
Much appreciated
Like the video before I watch it.... cuz I already know this dash bout to be 🔥..... bruh be making dashes look how they should have came from the factory
Thanks man
256 done did it again... Man you bad with that... Much respect... Huntsville showing love to Decatur
Thanks for the 256 support
Always
I watched and learned a lot from your videos and painted My Motorcycle using your method. It came out great and I get a lot of you didn't paint that. Thanks' Man for the knowledge. Candy Apple forever!
No problem William
pushyhog is with ya, l learn here.
Thanks 🙏🏾
Too clean 🔥🔥
SmoothReleaseRecords thanks
@@SprayWayCustoms where you located..I need to be put in the game like this
From junk to showroom amazing. You did it again.
Thanks Steve
God gave you a gift - your mind connected to your HANDS! Great job, my man! Hell yeah!!! Sonny (CT)
Thanks Sonny
Sprayaway has done it again with another 🔥🔥 video flawlessly as always
Thanks again Pete
@@SprayWayCustoms call me fam
Ok 👌🏾
damn that looks good spray 🙌💯
Thanks MGC
@@SprayWayCustoms no prob spray✊
I have never worked with fiberglass, but every video I watch of yours ( makes me want to find a project to use it )
Let's get it then Charles 💪🏾
Always improving your craft. That's what people do that enjoying their job/hobby always finding new/better ways to perfect their craft. Master mind/tradesman
Thanks D Will
I'm literally in the garage right now working on something similar I'll send you pictures of my progress
Ok then fam
👀 bruh that dash 💦.... nice bro. I wanna do that deep red or a orange on my 88 rx7
Ok fam... thanks 🙏🏾
Hey bro from El Paso tx .. doing it thanks to your videos..almost done on mine.. from a 1977 Buick regal..
Thanks Gabe
Not surprising that you are busy busy!, Your exceptional work is the best!! Keep at it man!!👍
Thanks Chris
I need my 87 cutlass dash redone its all messed up
Scotti DuGotti I'll be doing a Cutlass dash real soon because mines the same way
@@SprayWayCustoms hell yea can't wait
I hv an 87 cutlass dash i need done also
I have a 85 C10 dash that need to be done.
Hey *SprayWay* _SprayWay_ ~SprayWay~, I need some work done. How does one contact you?
What you got? I might can squeeze you in.
SIR I thank you for this presentation. My third gen camaro dash just got redone the same way you teached.the dash looks new.THANK YOU.
Thanks man. I'm working on a Third Gen Camaro now
Sprayway i seen kats on UA-cam claiming they can paint and fiberglass. They work aint clean as yours. You're the best by far
Thanks for the compliment Eric
I was looking for RONDO in walmart LOL
I need to put it on the market 🤣🤣
Bro I’m waiting on u
👍🏾👍🏾
All I can say is WOW! Excellent work and such amazing attention to detail. Thanks again for another inspiring and educational video. 👍🏽
No problem Kenneth. Thank you for watching
Thanks for your videos, love your work. So much better than others. They just show a time lapse video where you actually show how its done. Thank you from the do it yourselfers. Keep up the good work. I found you about a week ago and watch more every day.
Thanks Tommy. I'm glad you found my channel
🤮 Smh just NASTY!!! Best 1 so far Spray! 👏🏾👏🏾👏🏾 SALUTE!!!
Thanks for the support
@@SprayWayCustoms Wuz up Spray! How's ur schedule looking? When can you do the dashpad on my 77 regal? I kno u buzy and i preciate ur time and help bro! ✌🏾💙💰
🔥🔥🔥 what's the pric? Want mines done..
I'll have to get caught up and then I can take care of you
@@SprayWayCustoms ok just let me know!!! Thanks🙏🏾
I watched every minute despite having no intention of ever doing this. So satisfying to watch this level of work.
I really do appreciate that
From trash to a ungodly masterpiece #sprayway is the master
Thank you Jeff
I was starting to worry about you boss. Once again you killed it.
Thanks Adam 🙏🏾
Spray I been watching your videos for years. I been saying that imma start doing some work on my car and I finally made the leap. Thanks for the motivation. Your videos help a lot.
That's what's up LSJUAN
Amazing work as always Sprayway you have them lined up and knock them down, i learn something new every time I watch thanks Sprayway
I be trying fam 💪🏾
That color is amazing, love it - excellent work!!
Thank you
Brother. Dang. I have to tell you that you inspire me. I just finished molding my door panels with your inspiration. Stock 3rd Gen camaro with the plastics from a 4th Gen firebird. I'm painting some of it and wrapping the rest. Thank you so much
That's great James. I'm glad I could help you out man
Brother, you are blessed. Your work is beautiful. It shows you really love what you do. It's the only way. Thanks for the vidoes.
No problem Mike. I appreciate the support
Man you can come pick the Chevy Caprice up and just Holler out Walla and whatever you do to the car's is off the chain just amazing how much time and effort you put into your work fiberglass is your specialist
Thanks Vocals man, I appreciate that
SprayWay w/another banger!!! Tht joint came out great!! Keep blessing us my G!!!
Ok... thanks
Hands down. You don't be playing no games man
Thanks
Wow 👏 thank you for sharing
I could leave the dash in the sun 🌞 and stare at it all day!
Great work one day I'll try to do mine
Thanks Tony
One of my favorite channels ! Thanks for the content.
Thank you Rob
That’s out of the park. Grand slam to boot. Great patience and skill combined with a craftsman’s willingness to get it right. Awfreakingsome.
Thanks Mick
Another awesome video man! I had no idea you could revive a dash pad that far gone, awesome work man, I can’t wait to try this out and then have some fun laying down some sick paint on it!. Thanks again for sharing your knowledge and quality work. Stay safe and cool during these crazy times✌️😎
Thanks Ryan...you do the same 🤝
You are the king of dashboard repair. I followed your instruction and mine came out extremely good.
That's great. I'm glad I could be a little help to you 🤝
King of the box Chevy dash ! 👍🏾
Thanks D W
I love watching your video's. You show all the details how to do the work and doing it right. You've got some mad talent. I'm still catching up on the rest of your videos.
Thanks Mike d
You have a serious gift for what you do family. Keep doing your thing by all means Necessary!!
I'm gonna try my hardest. Thanks
Mane! that there is the REAL DEAL PLAYER!
Thanks Patrick
Absolutely killed it once again! Thanks for sharing your craft man. Got me inspired to try my hand at fiberglass!
Go for it. You can do many things with fiberglass
Yeah you definitely showing me the way 💯
Really amazing work, very beautiful!
Thanks
Your work is amazing you do good job of saying how to do it step by step and showing the process of how things are going to be to getting them done I have a dashboard from a 87 Pontiac firebird and watching these videos I think it's not going to be as much of a challenge now from what I learned thank you a lot
Guess what....I'll be uploading a dash repair video today on a 88 Camaro Third Gen.....thanks man
Best video I've watched in a while! Going to get 3 dashboards in the morning just to practice! Appreciate it the content
Thanks man...practice makes perfect
Bruh you did your thang on Ms. Ruby as always salute 💯💯💯
Thanks Dexter
this job was so good i had to watch it again, real nice man.......
Thanks Thomas
I think Brandywine is one of the best... Job came out excellent....
Yes it's in the top for me also
Prep work flawless! Straighter than factory!
Thanks
Killed it again Sprayway!!! Can’t wait to see the whole whole car finished! After I made my dash video everybody hitting me up to do their dash too!!
I appreciate you TNT / Tony....When I was doing the C10 dash, I had all your vids on repeat 💪🏾
SprayWayCustoms My Man!! 😎✊🏾
Look at that finish! Excellent work
Thanks Matt
LOVE IT! Amazing results!
Thanks
SprayWay thats a wonderful job 🔥
Very much appreciated
just watched every minute. The dash turned out nice I like how wet it turned out, For sure going to do one of my dashes this way. hopefully I can get close to look as good as yours
Thanks
Ain’t even seen video yet SprayWay just the thumbnail alone 🔥🔥🔥🔥🔥🔥
I'm glad to see you stop through and showing love 🤝
SprayWayCustoms how do we get in touch with you??
Great job bro. Def the best vid u did explaining how to do these dashes. Thank You.
Thanks Catloco
that looks amazing awesome work
Thanks John
Raw, uncut, dope, love it... my g
Thanks 🙏🏾
I’ve been looking at your work for 3 years now and you still cold whit your work keep up the good work sir
Thanks for the support
Straight fire work 🔥🔥
Thanks
Thanks for explaining thelow spots high spots! It makes more sense to me now
No problem at all
Great video as always fam 👍👍
Appreciate you
Sprayway you are the truth bro. A true perfectionist. Keep those videos coming!
Thanks
Man, that dash is crazy messed up before you fix it. I was thinking no way you could fix that. Awesome!
I'll give it my all. Thanks 🙏🏾
Another fine video of some very fine work!! Man you got some crazy skills!! God bless!
Thanks for all the support
Another master piece. Thank you so much for the video
No problem Matt 🤝