that was me that mentioned to them about the power outage. We lost power here in FL. was over 3 hours and it stuck. was able to hit resume and it just printed like it never lost anything
love my panda lux and panda touch. I updated the firmware and bricked my touch and there customer support team had me fixed in less then 2 days. Must haves for bambu peinters
Interesting they show the Panda Lux light running at the same time as the stock light, but they said not to do that as it overloads the power from the control board
Oh, finally I can know what those product listings with no pictures on their store are XD Been quite happy with all the upgrades from them (I got the Revo, Extruder, Claw but it wasn't good enough for me because too heavy and a few other concerns, Lux, Fur, Jetpack and all the build plates, but I hated the designer series, never got any filament to stick to it but after two weeks of arguing they agreed to refund it). Overall, really nice products, although QC could be better, as my Frostbite had one side with a pretty large blob of coating in the middle, and the Extruder was bent due to the lever arm pin pressfit, which they also agreed to replace after arguing for two weeks : P Imo the Frostbite, Revo, Lux and Jetpack are must haves. I'm soon gonna get the Supertack from Bambu to use instead as I've seen people saying it has slightly better performance, but mainly for me I don't always want the super shiny surface that the Frostbite leaves on prints, it's a pain to sand when I want to do stuff like two sided tags.
The Panda Claw is an objective downgrade; super heavy and causes ringing due to the poorly machined gears. Same for the Panda Extruder--for $40 it's only 1g lighter than the fully-sealed Bambu extruder and the bearings fit so loose they rattle around. The Panda Lux has horrible color rendering index and light distribution--you'll get better definition on your prints with the stock light or a cheaper USB LED nightlight that plugs into the OEM port on the inside of the frame. They filter their website reviews so that the mediocre and negative ones never appear. Overall, I'd say Biqu is batting around .200-.300--fine if you're doing baseball but not so good as a commercial company.
@@EliteMacFreak I have the Lux in my P1S - I don't have the issue you are talking about. The OEM light was crap for lighting. Really that's the one place where Bambu really "failed" in a product design sense. The location of the stock light is terrible.
@@KITDFOHS The color profile really is to cool for my preferences, I wish they had a way to swap between different color temperatures like most strip lights allow for.
@@KITDFOHS There's different "temperatures" to white light. Basically there's "cool" white which leans more to artificial blue in color and then there's "warm" white which leans more toward natural yellow in color. It's really a preference thing, most light bars/strips have a way to switch the profile between the two and they actually sell separate bulbs for home use.
The turbo and the sense is gonna be lit. Love what Bigtree is doing for bambu printers.
that was me that mentioned to them about the power outage. We lost power here in FL. was over 3 hours and it stuck. was able to hit resume and it just printed like it never lost anything
Oh, that is great! So you are a bit mentioned in the video
@@Zachary3DPrints lol well atleast part of my story lol
Getting a A1 Mini for christmas.
Super excited to step into the world of 3d printing!
a1 mini is such a great little machine, you won't be disappointed.
I'm looking forward to the Panda Breeze.
Please make cool build plates for Qidi printers.
i just ordered the cryogrip buildplaye and im so excited about it hope it helps for my adhesion issues
love my panda lux and panda touch. I updated the firmware and bricked my touch and there customer support team had me fixed in less then 2 days. Must haves for bambu peinters
Interesting they show the Panda Lux light running at the same time as the stock light, but they said not to do that as it overloads the power from the control board
Maybe they are running it from the power supply they showed as well?
Oh, finally I can know what those product listings with no pictures on their store are XD
Been quite happy with all the upgrades from them (I got the Revo, Extruder, Claw but it wasn't good enough for me because too heavy and a few other concerns, Lux, Fur, Jetpack and all the build plates, but I hated the designer series, never got any filament to stick to it but after two weeks of arguing they agreed to refund it). Overall, really nice products, although QC could be better, as my Frostbite had one side with a pretty large blob of coating in the middle, and the Extruder was bent due to the lever arm pin pressfit, which they also agreed to replace after arguing for two weeks : P
Imo the Frostbite, Revo, Lux and Jetpack are must haves. I'm soon gonna get the Supertack from Bambu to use instead as I've seen people saying it has slightly better performance, but mainly for me I don't always want the super shiny surface that the Frostbite leaves on prints, it's a pain to sand when I want to do stuff like two sided tags.
Luke as jy die lees gee my n luitjie. :D
Bigtree makes the best build plates for Bambu.
The Panda Claw is an objective downgrade; super heavy and causes ringing due to the poorly machined gears. Same for the Panda Extruder--for $40 it's only 1g lighter than the fully-sealed Bambu extruder and the bearings fit so loose they rattle around. The Panda Lux has horrible color rendering index and light distribution--you'll get better definition on your prints with the stock light or a cheaper USB LED nightlight that plugs into the OEM port on the inside of the frame. They filter their website reviews so that the mediocre and negative ones never appear. Overall, I'd say Biqu is batting around .200-.300--fine if you're doing baseball but not so good as a commercial company.
@@EliteMacFreak I have the Lux in my P1S - I don't have the issue you are talking about. The OEM light was crap for lighting. Really that's the one place where Bambu really "failed" in a product design sense. The location of the stock light is terrible.
@@KITDFOHS The color profile really is to cool for my preferences, I wish they had a way to swap between different color temperatures like most strip lights allow for.
@@reluttr2 not sure I'm following. Are you saying it's too white? My entire home has 5k-6k LEDs in it with the exception of one bathroom
@@KITDFOHS There's different "temperatures" to white light. Basically there's "cool" white which leans more to artificial blue in color and then there's "warm" white which leans more toward natural yellow in color.
It's really a preference thing, most light bars/strips have a way to switch the profile between the two and they actually sell separate bulbs for home use.