Appreciate the results. You might consider doing more setup before starting video? Like get the motor mounted, test direction and connections. If you want to show the prop, start the video at that point. Great power you're getting though, have to get me one of those.
Yes bro.ap motor ko to atchhe se use karsakte ho lekin ap is propeller ki jagah pe blower wala machanisum use karke robot bayenge to atchha result milega
Ha ye bat sahi he friend mene video me esi bat kahi ki ap ise use na kare Ye bas janne ke liye tha Ap jese ek friend ne muje kaha is propeller ko lagane ke liye
hey mate i have the same motor as you but i have a 40a esc and a 3s 2200Mah 30c battery. what would be the best propeller for this setup and nice video
thx for the video brother..i have question i have 1000kv motor same model like urs with 1045 propeller with 30A esc is there risk for burning the motor or the esc ?
Bro if mera drone ka weight all total 20grams hai aur mera motor total thrust 30 grams generate karta hai to kya mera drone thoda sa bhi udega ya nahi just for example.
hi i have used 30amp esc with 2200kv bldc motor with 5045 triblade prop can i use it beacause my esc got burnt after using it please tell me what should i do
1/2 throttle pe 2200 mah ki battery use karna vo 10 minute sebhi jyada time degi Agar plane bannane me use karan he to 1500 mah battery use karna Ane subscribe karna dost
No. But 10inch propeller is not made for 2200kv bldc motor. Because 2200kv bldc made for speed not for torque And 2200kv bldc motor not create maximum speep with 10 inch proppeler so motor or esc burne
i want ask you, why esc will burn with 1045 propeller ?? i did read about it, and am not sure but it will take to much current to turn the propeller but how to calculate that current ?
Brother, to put it simply. The speed of the motor increases as you increase the kv And if you install a large propeller with a motor with more kv, the motor will not get the desired RPM. A low kv motor is used for power and a high kv motor is used for speed. So that the esc and the motor will heat up and one of the two will burn out
@@jjprctech07 @RC TOYS thanks for answering me ❤️ and I did subscribe, can I ask you again please (am new to rc drones), What if I want torque with speed (to generate higher thrust) for the drone like 1400 kv motors with 1045 propellers will the motors heat up ? Coz I want to make payload drone
Appreciate the results. You might consider doing more setup before starting video? Like get the motor mounted, test direction and connections. If you want to show the prop, start the video at that point.
Great power you're getting though, have to get me one of those.
thank you bhai
please dont use this because it will use more amphere 1045 is best for 1000kv motor for 2200kv motor use 6-5 inch propeller
Yes bro
I talked about it in the video
Thank you for comment and please subscribe 😊
ua-cam.com/video/_CctjrRLGB8/v-deo.html
ua-cam.com/video/r361aiISiYU/v-deo.html
Can we use it with more amp esc ?
Yes
mujhe laga nahi tha ki aap mere recommendation ke uppar ek vedio dalo ge
Well come my friend 👍
Video kesa laga dost tumhe
@@jjprctech07 mast
@@mahargha_debnath thank you🙏
bhai mein is motor aur propeller, glass window cleaning robot mein use kar sakta hoon? plz reply🙏
Yes bro.ap motor ko to atchhe se use karsakte ho lekin ap is propeller ki jagah pe blower wala machanisum use karke robot bayenge to atchha result milega
Please subscribe karna friend
Bhai dhoseri bhali motor kitne bade owtha sakti hai isme video banao...🤩🤩
Wo jo red colour me he vo
Use red colour vali pe video banau
Ha bhai red vali
ready to sky motor vali
Ok friend 👍
BRAVOOo!!! BRAWOOO!!! thanks!
Please show bench test with 6042 or any 6inch propeller for 2200kv motor,incase u already know thrust value kindly let me know
ua-cam.com/video/_CctjrRLGB8/v-deo.html
is motor ke sath galat pankha laga rahe ho ye 1000 kv ke sath lagta hai ap 6 inch wala lagao motor garam nahi ho gi
Ha ye bat sahi he friend mene video me esi bat kahi ki ap ise use na kare
Ye bas janne ke liye tha
Ap jese ek friend ne muje kaha is propeller ko lagane ke liye
hey mate i have the same motor as you but i have a 40a esc and a 3s 2200Mah 30c battery. what would be the best propeller for this setup and nice video
Use 6 inch propeller 6×4.5
thx for the video brother..i have question
i have 1000kv motor same model like urs with 1045 propeller with 30A esc
is there risk for burning the motor or the esc ?
Yes
@@jjprctech07 what i should make to do not burn the esc or motor ? need to change something ?
Use 1045 propeller with 1000kv motor. 9 inch propeller with 1400kv motor.8 inch propeller with 1800kv motor.6 or 7 inch propeller with 2200 kv motor.
Please subscribe bro
@@jjprctech07 thx u bro u get my subscribe from last week :D :P thx for info god bless u
8:40 who uses clinical thermometer to measure object temperature 😂🤣
😅
With the same prop but 2600kv is it more powerful or what can you answer me please
Yes. But this propeller is not suitable for kV motors higher than 1400kV
Thank you very much 🙏@@jjprctech07
Bro if mera drone ka weight all total 20grams hai aur mera motor total thrust 30 grams generate karta hai to kya mera drone thoda sa bhi udega ya nahi just for example.
100% udega
Amazing 👏🙀😮😲
hi i have used 30amp esc with 2200kv bldc motor with 5045 triblade prop can i use it beacause my esc got burnt after using it please tell me what should i do
Place the esc where it can be cooled by the air from the propeller
And please subscribe friend
Use 40A or 50A esc, motor can take upto 40A when at full throttle. Also your motor might burn if you are using 4s.
Bro kitni capacity battery use kare es motor keliye?
Normal 10min fly time de
1/2 throttle pe 2200 mah ki battery use karna vo 10 minute sebhi jyada time degi
Agar plane bannane me use karan he to 1500 mah battery use karna
Ane subscribe karna dost
@@jjprctech07 thankyou bro❤️
Bhaiya kya motor 5 inch wale propeller se garam nhi ho ti ? Or kya mai is 1045 ko use karu
Ap 6 inch vala propeller use karo 2200kv ke motor ke liye vo sahihe. baki 10 inch propeller me long time use se esc ya motor damage ho sakti he.
Please subscribe
@@jjprctech07 kar diya
Put some [CC] CAPTION, subtitle !
Let me know more about it
Bhai 6045 prop or 2200kv motor kitna weight leta hai
700gm
Sir , can I make a fan from 1000kv bldc (10inch drone propeller) ?
Achha backup dega ? ( Matlab heat to nhi higa ? After continuously using 2-3 Hours
Motor or propeller ko kuchh istrha se lagao ki motor par or esc par hava lagti rahe.
Jeseki drone me.
To kuchh nahi hoga.
Or channel ko subscribe karna dost👍
@@jjprctech07 done vro
@@jjprctech07 bhai mujhe drone nhi banana hai , mujhe table fan banana hai is motor se
Ha sahihe bro.
Lekin kutchh is tarha se jugad karna ki motor or esc pe hava lagti rahe 👍
Sir what's the price
Motor 450 to 550
Esc 700 to 900
Subscribe brother
Nice video bro
Bro i am using same motor once I give full throttle my motor will off what reason . slowly move the throttle only work
Please check that the battery is full
And please subscribe and share your friends
bhai apke remort our reciver kithne ke nai ???price ?
Us time 5500 ka tha abhi ki link bhej raha hu chennal subscribe karna thik he👍
robu.in/product/flysky-fs-i6-2-4g-6ch-ppm-rc-transmitter-with-fs-ia6b-receiver/?pid=47628
Abhi stock nahi he badme a jayega
Thank you bro
@@jjprctech07 🤩👍👍👍
ongomong opo toh
Your motor have any problem
No.
But 10inch propeller is not made for 2200kv bldc motor.
Because 2200kv bldc made for speed not for torque
And 2200kv bldc motor not create maximum speep with 10 inch proppeler so motor or esc burne
Ok sir i will use 7inch propeller
i want ask you, why esc will burn with 1045 propeller ??
i did read about it, and am not sure but it will take to much current to turn the propeller but how to calculate that current ?
I am unable to understand your question
@@jjprctech07 if you use 2200kv motor with 1045 propellers, (ESC or Motor) will one of them burn if yes why?
Brother, to put it simply.
The speed of the motor increases as you increase the kv
And if you install a large propeller with a motor with more kv, the motor will not get the desired RPM. A low kv motor is used for power and a high kv motor is used for speed.
So that the esc and the motor will heat up and one of the two will burn out
Please subscribe
@@jjprctech07 @RC TOYS thanks for answering me ❤️ and I did subscribe, can I ask you again please (am new to rc drones),
What if I want torque with speed (to generate higher thrust) for the drone like 1400 kv motors with 1045 propellers will the motors heat up ?
Coz I want to make payload drone
How much volt ????
11.1 volt
Please subscribe
Subscribe done
😯🔥
Hello please i have a 20A esc,can it work with thw 1400KV version with an 8060 prop?And nice video too😊
Yes it will work but there is a risk of burning the esc.
ভাই আমার একটা লাগ বো এটার দাম কতো
If I use 5045 propeller......
Proper thrust will not be generated by the motor
For 7 inch and 6 inch propeller
ua-cam.com/video/_CctjrRLGB8/v-deo.html
ua-cam.com/video/r361aiISiYU/v-deo.html
Name the battery specs pls
2200 mah 11.1v 3s lipo battery
Please subscribe
💥💥💥💥💥💯💯💯
स्टाग्राम id दो
Rctech07