I honestly went through the same challenges a while ago and I gave up when I couldn't really calibrate my ESC and then my MAVLINK didn't work anymore and I couldnt find stock. Your video inspires me to finish this project. I appreciate your trials they inspired me to keep working on my challanges
Biting off way more than you can chew in a project! That's how I like to do it. :) You have a great sense of humor and a positive attitude. New subscriber.
Aside from being uncalibrated ESCs, another reason was that the ESC is pumping more current to the motor while the motor is stuck on the ground by the propellers. The ESC pumped current past its rated current and it burned the module itself. The reason ESC pumps more current to the motor is because the ESC thinks (not literally) that the motor is a very high load so it continuous to up its output until the motor starts. But the propeller basically cannot rotate due to it being stucked on the ground, which makes the motor require more current. What you can do to avoid white smoke when the drone tips over is to disarm the drone immediately to avoid the ESC pump more current.
@@Augmented_AI It also happened to me before, so I felt the need to comment this. lol. Anyways great job on the project! You've inspired me to continue working on my drone project.
Bro please work on a drone which can convert itself into an insect like spider 🕷 as soon as we land it. It will increase the functionality of drones and is something new.
Thank you for sharing this! I watched all three of the videos and really enjoyed the journey! I have been planning on making my fully autonomous drone and to know that others are also doing it is very interesting to see and learn from! Thank you again for these!
One thing I learned in my initial days is that the extended legs are just pure garbage , instead after some failed landings i just 3d printed some extenders to extend from motor base And taking off from grass is kinda tricky you have to be 100% sure and take off without any second thoughts if you have one it will bounce and turn into a weed wacker Using a hard tile always helps
I see it is going to be Pixhawk+Rasberry Pi+ROS drone. Good to see it. It is true that 1st flight of it is challenging. Once the parameters in Ardupilot and ROS nodes are fixed you are good to go.
Hi Susanta, Yeah Im using Pixhawk+RPi but not ROS. Just using Native Python and Drone kit for the control. If you are just starting out without the right guidance it is. But after I spoke to some experts it because easier to figure out and to get it flying. :)
Hello Sir, very interesting video. I am interested in collecting the load current, and battery voltage along with telemetry data. I want to use it for battery usage estimation. Have you ever done such experiments?
Hello Brother, For an undergraduate the price is too much for the course. Can u suggest something else in a mid range so that we normal students could afford it.
Hey hru, i need help building my drone. I’m having problems starting pixhawk with a fs-ia6b trans. My controller is binded with the trans but not letting me calibrate on ardupilot
Yes, i was able to fix that. Question though ? Is there a way to fix a flight controller? I think I crossed wires by mistake or over loaded the flight controller with the cam and landing gear and cam transmitter
I think so. Only the main light is coming on not the B/E light or the other lights. Also I only get one sound signature when powered up. Motors are not responding or a esc’s
Hello sir new subscriber here and I am getting an error in opencv called sourcereaderasync and cvt:color I am facing with this problem for about 3 days and I can't find the solution
Hi Ritesh, Do you know if the kit from Drone Dojo is currently available. I attempted to order but the price on the order form would not populate with an amount? Great videos. Keep up the good work. John
I gently tapped that like button. I smashed that subscribe button after the video. Keep up the good work brother. Raising the bar comes with the responsibilities of meeting viewers expectations.
Hi friend. How are you. Your videos are great, congratulations for the presentations, I need help with a Hexa I'm assembling a Hexa with an APM 2.8 but when I connect to the mission plane to do the tests on the motors, they are inverted, motor 1 works correctly on arm 1, motor 2 it works on arm 4 and 3 on 6 are all inverted I've updated the apm with a firm 3.2.1 I've done a lot of research but I can't find where to check. I am very grateful if you can help me. Thank you for your attention and rest in the Lord's peace.
first of all: great project! uhhh. those are ancient parts! why? why? these ESCs are controlled by PWM i guess? 2-4S big and heavy like hell... the cheap flysky remote, the ABS frame? why no carbon?... uhh I hope this ends well
Haha, true, it's all part of the learning experience 😄. So at the time I didn't know what I was doing but now that iv built my first drone. I'm more confident to explore other options like youv mentioned :). What's your drone build like?
Hi brother, I'm a long subscriber to your channel.one thing I want to ask you.i don't know coding but I want to learn.please guide me and how to get the job.
I am looking forward to buy your course on Edith smart glasses.I am an indian and can you tell me the price in indian money as in dollars it's highly expensive and does this course include paid version of Opencv and holo software in unity.
Gentle man, a lot of thing about drone but we saw your are using AI. If you get knowledge such this person Mr. Raffaello. If you get in formation please go TED lectures. Ishtiaq Ahmed Siddiqui.
🚁Build your own AI Drone Here - lnkd.in/dC5Gcg_S
I honestly went through the same challenges a while ago and I gave up when I couldn't really calibrate my ESC and then my MAVLINK didn't work anymore and I couldnt find stock. Your video inspires me to finish this project. I appreciate your trials they inspired me to keep working on my challanges
Biting off way more than you can chew in a project! That's how I like to do it. :) You have a great sense of humor and a positive attitude. New subscriber.
Haha Yes, like the Mandalorian would say " This is the way!". Thanks for the sub and the comments :D
Aside from being uncalibrated ESCs, another reason was that the ESC is pumping more current to the motor while the motor is stuck on the ground by the propellers. The ESC pumped current past its rated current and it burned the module itself.
The reason ESC pumps more current to the motor is because the ESC thinks (not literally) that the motor is a very high load so it continuous to up its output until the motor starts. But the propeller basically cannot rotate due to it being stucked on the ground, which makes the motor require more current.
What you can do to avoid white smoke when the drone tips over is to disarm the drone immediately to avoid the ESC pump more current.
I wish I knew this back when I was starting out with drone building. Thanks for the detail
@@Augmented_AI It also happened to me before, so I felt the need to comment this. lol. Anyways great job on the project! You've inspired me to continue working on my drone project.
@@NewbieTetris I'm glad that I could inspire 😁. Let's connect over whatsapp www.augmentedstartups.info/whatsapp
Bro please work on a drone which can convert itself into an insect like spider 🕷 as soon as we land it. It will increase the functionality of drones and is something new.
Thank you for sharing this! I watched all three of the videos and really enjoyed the journey! I have been planning on making my fully autonomous drone and to know that others are also doing it is very interesting to see and learn from! Thank you again for these!
I’m the same - I’ve never used a drone but it’s at the top of my hobby list, and I want to build instead of buying. Thanks for doing this!
@@VincentJenks building is awesome. So much more rewarding.
@@VincentJenks please join our AI Drone WhatsApp group chat.whatsapp.com/JTuIB3eEfDRGo0TL4RzqwB
One thing I learned in my initial days is that the extended legs are just pure garbage , instead after some failed landings i just 3d printed some extenders to extend from motor base
And taking off from grass is kinda tricky you have to be 100% sure and take off without any second thoughts if you have one it will bounce and turn into a weed wacker
Using a hard tile always helps
Love you dawg. Try a crazyflie next
Thanks bro 😎
I see it is going to be Pixhawk+Rasberry Pi+ROS drone. Good to see it. It is true that 1st flight of it is challenging. Once the parameters in Ardupilot and ROS nodes are fixed you are good to go.
Hi Susanta, Yeah Im using Pixhawk+RPi but not ROS. Just using Native Python and Drone kit for the control. If you are just starting out without the right guidance it is. But after I spoke to some experts it because easier to figure out and to get it flying. :)
@@Augmented_AI I see. drone kit python scripts are good to go.
I’d argue it’s more practical in the real world to have the ai be on a server so that it could end up controlling multiple devices
I just discovered you a day ago and I am loving your work bro, I like to get to meet you and learn more from you if you are around the Pretoria area.
That's awesome man. Where in Pretoria are you? Please join our WhatsApp group chat.whatsapp.com/JTuIB3eEfDRGo0TL4RzqwB
Do you think it would be feasible to use the NUCLEO-L476RG mcu instead of the Rasberry Pi?
Lets chat here chat.whatsapp.com/JTuIB3eEfDRGo0TL4RzqwB
Welldone Ritesh, enjoyed the video.
Thanks so much Lukas
Hello Sir, very interesting video. I am interested in collecting the load current, and battery voltage along with telemetry data. I want to use it for battery usage estimation. Have you ever done such experiments?
Let's discuss on WhatsApp chat.whatsapp.com/JTuIB3eEfDRGo0TL4RzqwB
Looking forward to part two 👍🏽
It will be out Next Tuesday
Awesome, thanks for sharing...
I would love blue prints and details on your drones
You can find it all here. bit.ly/DroneDojoCourses
@@Augmented_AI I have the exact same drone Kit and had a pi camera laying around looks like I’m gonna give this a go!
esc burned out because the motor consumed much more current that it could handle, whne the blades touched the grass..
Great stuff, looking forward to part 2
Thanks bro😁👍
Great job it's all trial and error bro
It all worked out, but was a great lesson going through this experience :)
love it, thank you sir!
I'm glad you enjoyed it Joe 😁🤘
Hello Brother, For an undergraduate the price is too much for the course. Can u suggest something else in a mid range so that we normal students could afford it.
Another Amazing Video!
Thank you, I really appreciate the support 😆
Hey hru, i need help building my drone. I’m having problems starting pixhawk with a fs-ia6b trans. My controller is binded with the trans but not letting me calibrate on ardupilot
Hey man. Is your pixhawk sd flashed with the firmware?
Yes, i was able to fix that. Question though ? Is there a way to fix a flight controller? I think I crossed wires by mistake or over loaded the flight controller with the cam and landing gear and cam transmitter
@@taking22 do you think you may have short circuited something
I think so. Only the main light is coming on not the B/E light or the other lights. Also I only get one sound signature when powered up. Motors are not responding or a esc’s
Do you know if a quick way to repair this or should I just get a new flight controller
Nice video. Enjoyed watching
Glad you enjoyed it 😀. It would help me out if you could share this video with your friends and colleagues. Thanks again
Fantastic build!
Hello sir new subscriber here and I am getting an error in opencv called sourcereaderasync and cvt:color I am facing with this problem for about 3 days and I can't find the solution
Hi, you can join our free course and we'll provide you with tech support.
See this why I'm always broke
I built a military code that allows a drone to automate itself and carry out missions adjust mid mission and take out targets using water…
Oh and it has facial recognition
Hi Ritesh,
Do you know if the kit from Drone Dojo is currently available. I attempted to order but the price on the order form would not populate with an amount? Great videos. Keep up the good work.
John
Try this link dojofordrones.com/raspberry-pihawk-drone-kit/
nice work dude... keep it up !
Thanks bro 😁
How much did it cost to make the drone??
may i know the price of full kit plzz
Just under $1k
I gently tapped that like button. I smashed that subscribe button after the video. Keep up the good work brother. Raising the bar comes with the responsibilities of meeting viewers expectations.
Nice Ritesh
Hi dear,
Does this setup work with APM 2.8 too?
It should work
Hi friend. How are you. Your videos are great, congratulations for the presentations, I need help with a Hexa I'm assembling a Hexa with an APM 2.8 but when I connect to the mission plane to do the tests on the motors, they are inverted, motor 1 works correctly on arm 1, motor 2 it works on arm 4 and 3 on 6 are all inverted I've updated the apm with a firm 3.2.1 I've done a lot of research but I can't find where to check. I am very grateful if you can help me. Thank you for your attention and rest in the Lord's peace.
Gently tap the like button. Finally some who treats the like button with respect ✊
😁
Where can i find a parts list?
Drone dojo! I just subscribed
I am making drone form last 3 years but still having lot of problem , as i am using apm2.8
Have you checked out the drone course in the description. It will solve the issues
@@Augmented_AI Thank you so much you replied me! I will surely
check out!!
Amazing video !
Really appreciate it Alvin. :) what would you like to see next?
Probably you should upload a video to complete roadmap for AR / IOT
And more about (Which language to use )
hi could you tell cost . we are ngo want to provide ai programable drone project to children's
first of all: great project! uhhh. those are ancient parts! why? why? these ESCs are controlled by PWM i guess? 2-4S big and heavy like hell... the cheap flysky remote, the ABS frame? why no carbon?... uhh I hope this ends well
Haha, true, it's all part of the learning experience 😄. So at the time I didn't know what I was doing but now that iv built my first drone. I'm more confident to explore other options like youv mentioned :). What's your drone build like?
Brother how u connect pi4 5v ? it need 5v up to 3.A how u connect that?
Thx ❤
what battery are u using?
Wow keep it up
Thanks Yohannes, really appreciate it 😁
Good 👍 job
Will this work with Raspberry with 4gb ram
How much cost u spend????
I'm a new subscriber 😍😍
Welcome 😄 what project are you working on.
Impress her
Hi brother, I'm a long subscriber to your channel.one thing I want to ask you.i don't know coding but I want to learn.please guide me and how to get the job.
I am looking forward to buy your course on Edith smart glasses.I am an indian and can you tell me the price in indian money as in dollars it's highly expensive and does this course include paid version of Opencv and holo software in unity.
You can contact me directly at www.augmentedstartups.info/fbmessenger
Any other platform to contact you sir I don't have a Facebook account right now.So any other way to contact you sir
What will be your recommended drone setup in 2023?
Basically the same but smaller frame and rpi0. I would check for a better or updated flight controller. Add some ChatGPT capabilities
Has anyone else here purchased from Drone Dojo? Is it legit? How long does it usually take to get your kit?
Damn bro.
Thanks 😁
There is no need to smash 😄
7:53 🤣🤣🤣🤣🤣🤣
😆😆😆😂😂
I am seeing this video but I don't have money to make this😄😄
Gentle man, a lot of thing about drone but we saw your are using AI. If you get knowledge such this person Mr. Raffaello. If you get in formation please go TED lectures. Ishtiaq Ahmed Siddiqui.
+1
can you share your no.?
Lets connect on linkedin www.augmentedstartups.info/linkedin
This is not AI, Is just gesture recognition
ajjajaja