Glad you could stop by and have a little fun. Hopefully the 455 will treat you right, if it acts crazy don't be afraid to send er back this way. Sometimes there will be one that gets a bit quirky 😂
They are definitely some work horses of a saw!!!! The closed port cylinders are awesome, I have a few 5000+ Partner saws here I'm going to be building very soon and they use the closed port 44mm cylinder. 👍🏻
Hmmmmmm. It would seem great minds think alike. It's gonna be hoot seeing the different builds and how the perform. I'll have to dig in to be done on time. Cylinder number 2, trashed number 1... Nice job.... You're the one to beat...
She's cutting like a boss! Definitely a big improvement. I had a feeling things would start getting a little more modified. 😆 Guess I'll have to keep working on one of mine. Up your game Dubb says. Love the saw. Awesome job
My money is on you for sure! Can't wait to see it at the hustle! Is that also 5 degrees timing advance? I wish you good luck! Carb made huge difference well done!
It's actually advanced about 8° now. I'm pushing it slowly to find its peak. I'm thinking about 6°-8° is about the sweet spot. But imma try 10° later in the week to see what happens.
Runs really good dubbs! Did you push the limits opening up the plastic intake like I had too to feel like I’m taking advantage of the bigger carb? Or did you just clearance it enough for the butterfly to open all the way? I ended up using an 038 bing knock off.
I barely opened it up when i was porting just to smooth it up a bit. Other than that, she was good to go. I wish I could match it but there just isn't enough meat there.
@@dubbssawshop you're welcome! That carb really brought her to life. Seems to run a bit higher rpm and more throttle response. She should hang with the best of the saws going to Boedys contest!
don't worry about me like i am a virgin/total rookie/ never had a saw torn down etc. but planning on it this year just gathering information, just tonight at a local auction i bought like maybe 100 carbs not new but off two cylinder and other lawn movers tractors etc, i figure they will be parts carbs for the little pieces i might need down the road? @@dubbssawshop
That was me..... Dubb you are the man my friend. I shall return.
Glad you could stop by and have a little fun. Hopefully the 455 will treat you right, if it acts crazy don't be afraid to send er back this way. Sometimes there will be one that gets a bit quirky 😂
That's a bad ass 55!! Guaranteed top competitor.
Hey, we can only dream!!! 👍🏻 I appreciate it and thank you for dropping by!!!
I bought a 55 new in 1999 i love mine.👍🇺🇸
That thing rips me and my boy are going to build a 55 closed port soon! Great job!
They are definitely some work horses of a saw!!!! The closed port cylinders are awesome, I have a few 5000+ Partner saws here I'm going to be building very soon and they use the closed port 44mm cylinder. 👍🏻
Hmmmmmm. It would seem great minds think alike. It's gonna be hoot seeing the different builds and how the perform. I'll have to dig in to be done on time. Cylinder number 2, trashed number 1... Nice job.... You're the one to beat...
Thank you man i appreciate it. It for sure happens. Luckily they are easily available. Hope to see you competing, gotta dive in and get er done 👍🏻
You sir, are not to be underestimated! That looks like one hell of a good little runner! And a real competitor!
Hopefully it'll put on a good show!!! Thank you man. 👍🏻
That is a strong 55!👍👍
She's cutting like a boss! Definitely a big improvement. I had a feeling things would start getting a little more modified. 😆
Guess I'll have to keep working on one of mine. Up your game Dubb says. Love the saw. Awesome job
That 55 is a straight up competition saw. Nice
She's a bit hot for sure, a good hot work build I'd say. If i do some chamber work the I'd call it competition ready. But she ain't no slouch 👍🏻
Link for a few of the carbs will be in the description!!!
Pretty AWESOME for a 55.
I built one with an 028 piston , it runs nice but not as good as yours!
Has an angry crackle. It's a contender.
Yes it is!!
I believe so!! Well.....I hope anyways. I have a good feeling tho.
Dang, you got that sucka flying, that’s a serious contender
👍🏻 I appreciate it man. Thank you.
My money is on you for sure! Can't wait to see it at the hustle! Is that also 5 degrees timing advance? I wish you good luck! Carb made huge difference well done!
It's actually advanced about 8° now. I'm pushing it slowly to find its peak. I'm thinking about 6°-8° is about the sweet spot. But imma try 10° later in the week to see what happens.
You " just " changed the carb and air filter? Was anything done before you got it because that saw is running unbelievably fast.
Absolutely!!! 😁 it's been ported and machined. Not to crazy tho, but she runs pretty good.
How did you fab the throttle lever? That 55 runs like a monster! Nice job Dubb!
Thank you buddy!!! 👍🏻 Alot of time bending some 3/32" brazing rod 😂
Started with 1/16" to get the general design then mocked the bigger rod to it.
Runs really good dubbs! Did you push the limits opening up the plastic intake like I had too to feel like I’m taking advantage of the bigger carb? Or did you just clearance it enough for the butterfly to open all the way? I ended up using an 038 bing knock off.
I barely opened it up when i was porting just to smooth it up a bit. Other than that, she was good to go. I wish I could match it but there just isn't enough meat there.
@@dubbssawshop thanks for the info I won’t push it any farther then! I hope mine is within 10 seconds of yours 😂😂😂😂
@@BillsGarageWorks 🤣 10 seconds, nah you got this. Mine may be the turd of the bunch. Race day anything can happen.
She looks beastie
She rips!
Thank you sir 👍🏻!!!
@@dubbssawshop you're welcome! That carb really brought her to life. Seems to run a bit higher rpm and more throttle response. She should hang with the best of the saws going to Boedys contest!
@@ragercrepair9301 thank you man, I'm really hoping so. 🙏🏻
@@dubbssawshop you'll be on top with the best of them bro!
@@ragercrepair9301 it'll be nice!!! 👍🏻
spicy
any chance you could post a link to that carb I am getting different results looks like a bowl on the bottom of most of them
www.ebay.com/itm/254627521629?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=7U9bODLyR9u&sssrc=4429486&ssuid=gCgMQEEWTwC&var=&widget_ver=artemis&media=COPY
Just can't use it to race against me 😂😂!!! J/K I found it would work and figured I'd share it for all. Great little power adder
Thanks seen so many different ones this one looks good have fun@@dubbssawshop
don't worry about me like i am a virgin/total rookie/ never had a saw torn down etc. but planning on it this year just gathering information, just tonight at a local auction i bought like maybe 100 carbs not new but off two cylinder and other lawn movers tractors etc, i figure they will be parts carbs for the little pieces i might need down the road?
@@dubbssawshop
@@diggindiggenit6540 oh heck yea man. Parts are good to have around. If you need any help or info just let me know 👍🏻 I'll help out anyway I can. 😉
Goes mint. I have a hot 55 and yours would be faster.
I appreciate it buddy 👍🏻!!! Hopefully it'll do good in the Horizontal Hustle in March.
👍🆙👽
What did you do 2 🚀⁉⁉😁
@@Doc-Cole_Trickle-of-Chainsaws I'm trying to send it into orbit!!!! 😂
👍🏻
@@dubbssawshop😂, did something dirty, used and yellow show up the other day?
Nice! 😊
😊❤ Love you Stinks 👍🏻 glad you found the new video!!!!