Це відео не доступне.
Перепрошуємо.

Our new 5' CountyLine Rotory Cutter.

Поділитися
Вставка
  • Опубліковано 1 сер 2022
  • I finally setup and test out our brand new CountyLine rotory cutter. I initially tried it out behind our Yanmar SA324 and it is working out great. Next I'll try it behind the John Deere LV4010.

КОМЕНТАРІ • 28

  • @ellobo1326
    @ellobo1326 Рік тому +2

    Glad to see that it will turn a 5 foot cutter with no problem. I have a 4 footer I’ll be using with my SA325.

    • @billcooper54
      @billcooper54 2 місяці тому

      I just did 3ft fields with 5' no issues, same tractor

  • @Moosepuck123
    @Moosepuck123 Рік тому +2

    Thanks for the details and no bs video….picking up a 5ft today, they’re on sale…yay!

  • @travisricks3436
    @travisricks3436 Рік тому +3

    That rotary cutter does an excellent job.

  • @dennisgood1997
    @dennisgood1997 Рік тому +2

    Nice video. I just got one of these a week ago. Had to cut 9 inchs off the pto shaft. Went through set up just like you. Only did a test run worked great!

    • @97TRAKIN
      @97TRAKIN  Рік тому

      Thank you for the comment. What tractor are you running it behind?

    • @dennisgood1997
      @dennisgood1997 Рік тому

      1953 ford with a pto adapter

  • @ozarklanding
    @ozarklanding Рік тому +2

    I also read my sa425 manual and use the same procedure. I’m new to tractors.

  • @billcooper54
    @billcooper54 2 місяці тому +1

    Keep bucket lowered to help push down plus make sure you do 50hr service on these tractors! I just did mine oil thin and dirty!

    • @97TRAKIN
      @97TRAKIN  2 місяці тому

      Check out my videos on this tractor and my other tractors and equipment.

  • @michaelvoland3625
    @michaelvoland3625 Місяць тому +1

    Good Job! good info.

  • @subixbarbarasson6052
    @subixbarbarasson6052 Рік тому

    Great video. That traktor is pretty badass too. Salute from NorKal dude.

  • @antcali1
    @antcali1 Рік тому +1

    Thanks for posting !

  • @chief1193
    @chief1193 Рік тому +1

    I just got the 325 and I saw a video of a guy complaint about the PTO noise I also do mine like the manual said which is the same as yours and mine ran smooth as well.

  • @jakeschisler7525
    @jakeschisler7525 4 місяці тому +1

    I have about the same mower except the back of mine isn't rounded. The top link on mine is made different. When I turn on the PTO it is at idle and then I bring the throttle up to speed. On mine I had to put the lower pins on and when I did i didn't have the right socket to tighten it. I had one vibrate loose. So i bought a socket and used blue loctite with impact gun. I seen a video where the guy using it that bolt fell off and he then had a issue. I would think that you really don't have enough horsepower at the PTO, since all tractors loose horsepower from what the tractor has.

  • @jesuszuniga2375
    @jesuszuniga2375 Рік тому

    Great video and the good explains

  • @berlinjackson1847
    @berlinjackson1847 5 місяців тому +1

    I really like your videos. I am also have a yanmar tractor sa-424 which is a 24hp engine. I need to get a brush hog and dealer told me to use a 4 ft brush hog. He said a 5 ft would be straining the engine? But your 5 ft seems to work

  • @jesuszuniga2375
    @jesuszuniga2375 Рік тому

    Thank you

  • @damonr2233
    @damonr2233 Рік тому +1

    Doesn’t look like that cutter is equipped with a pivot for the top link??

    • @97TRAKIN
      @97TRAKIN  Рік тому +2

      It is equipped with a pivot 👍🏿.

  • @lilmama4426
    @lilmama4426 11 місяців тому +1

    This may seem like a dumb question but we are learning (just got a new 39hp tractor) we couldn't afford the $3000 towards the tractor brand bush hog but we learned (after wed already made the purchase) that we couldn't put any ole bush hog on it, needs to have a slip clutch. We are looking hard at this bush hog but can't find any info about it, does it come with a slip clutch? Thanks for the video!

    • @97TRAKIN
      @97TRAKIN  11 місяців тому +1

      You want a slip clutch or a shear pin/bolt setup. This brush hog uses a shear bolt.

    • @lilmama4426
      @lilmama4426 11 місяців тому +1

      @@97TRAKIN Thank You So Much for your help!! I'll pass that important info along to my Husband. Thanks again!:)

  • @andrewseamans1419
    @andrewseamans1419 10 місяців тому +1

    One year later how do you still like it?

    • @97TRAKIN
      @97TRAKIN  10 місяців тому +1

      I like it, no issues. I don't abuse it but I am HARD on it, I don't baby it. I take out trees with this thing. Check out some of my videos in my "Tractor" playlist.

  • @Sam-pw8zh
    @Sam-pw8zh Рік тому +1

    Is that a 25 hp trackor?

    • @97TRAKIN
      @97TRAKIN  Рік тому +1

      Yes it is a 25hp tractor. It is the Yanmar SA324.
      I also run this rotary cutter behind my John Deere LV4010 which has 19hp.