I did this a little different. I used half of the front view and made my base flange. I cut away geometry to get the circular shape, bottom notch. Did a tab and edge flange for the back gapped feature like you did. Then did a mirror. I got the same dimensions in the flattened state as you did, so I figure it was a valid method.
You can mirror the cutout instead of redrawing it on the opposite side if you Unfold all the bends before the mirroring operation. Once the cutout has been mirrored then Fold the part back and then mirror the Tab. It should work that way.
Could you demonstrate how to import a part designed with another CAD, fix it, convert it into sheet metal body and get it's unwrap? I could provide you such example part.
Sir, thank you for your videos. Learning so much from them. I noticed that you used Solidworks 2020 for this video. May I know how to activate the pencil cursor for sketching?
Olá tudo bem ! Esse exercício é ótimo como todos os seus exercícios . Mas gostaria de saber se vc pode enviar em pdf. Um abraço Mauro Ciscati Brasil São Paulo .
I think the side view of the drawing is of first angle projection whereas top and front views are third angle projection. Please correct me if I am wrong
Great video but your detailing has a few errors (One example of this: the overall length of a bent part should be in brackets () {indicating that the length of the bent part is not the absolute length but only a reference}). In-fact, all bent dimensions should be in brackets (). Also, you indicated the material thickness in all 3 bends in a single view when you could have just indicated this in the over-all dimensions (only once: as this dimension would only need to be mentioned once to show the material that would need to be ordered)
Honestly, do you think that would keep me from hiring you? If you were to demonstrate ability up to the point where all I had as criticism was brackets vs no brackets, I'm pretty sure you'd be hired. There is a difference between innate talent vs trained talent. Your critique is misguided, in my opinion.
@@sevendesign1805 and then when a machinist mis-reads the dims because its different to every other drawing he has seen, you then realise you should have been more critical of the guy who cant follow simple industry standards.
I did this a little different. I used half of the front view and made my base flange. I cut away geometry to get the circular shape, bottom notch. Did a tab and edge flange for the back gapped feature like you did. Then did a mirror. I got the same dimensions in the flattened state as you did, so I figure it was a valid method.
Thank you! I learn Solid and English with you.
The design of this sheet was excellent. Good luck.
Excelente tutorial 🎉🎉🎉 parabéns pela apresentação! ❤
Thank you! I have learned so much from you! You are the best teacher.
You can mirror the cutout instead of redrawing it on the opposite side if you Unfold all the bends before the mirroring operation. Once the cutout has been mirrored then Fold the part back and then mirror the Tab. It should work that way.
Good work!!! We also have rich experience in sheet metal fab, we are a strong manufacturer in China, with high quality and competitive price.
Thanks so much. You are just the BEST. I dream of being a draftsman like you someday.
Thank you, Excellent teaching skills you have!!
Mahtab Sir You are great Sir... Allah Bless you for your efforts 😘😘
How do you know if the flange position is bend inside or material outisde
Thanks! wonderful SOLIDWORKS instructing videos! 😎
Excellent sir, how to rotate the drg while evaluation please let me know sir 🙏
Very helpful 👍🏼👍🏼
sir do you provide drawings of component by in this video and other videos too... plz sir
Thanks dro.
Can you make videos of sheet metal drawing? 🤗
Pls post more advanced tutorials like mold design and simulation
Could you demonstrate how to import a part designed with another CAD, fix it, convert it into sheet metal body and get it's unwrap? I could provide you such example part.
Please do one on weldments!
Sir can u tech same in CATIA v5
Great video. thank you
Sir, Do you have something with atleast 50 parts?
Sir pls make a one video for best laptop for SolidWorks
Sir, thank you for your videos. Learning so much from them. I noticed that you used Solidworks 2020 for this video. May I know how to activate the pencil cursor for sketching?
Really you are awesome sir
Making more sheet metal development videos....
And make GD&T videos all also😍😍
Thanks for making
Excelente
Great video! 🙂 👍
great work thank you
You are wonderfull
please give me the sketch of this sheet metal for the dimensions for practice
Olá tudo bem !
Esse exercício é ótimo como todos os seus exercícios .
Mas gostaria de saber se vc pode enviar em pdf.
Um abraço Mauro Ciscati
Brasil São Paulo .
Mauro dá um print no celular. Eu faço isto.
Hello sir Can we do this as the planets rotate? A student waiting for your answer
I think the side view of the drawing is of first angle projection whereas top and front views are third angle projection. Please correct me if I am wrong
i also felt same. i think the side views and sections views plament is wrong. if the drawing is in third angle projection
Sir pls suggest best laptop for SolidWorks user.
Thank you
which software used for making this video
In sheet metal BAS 90 R 6.35 what is a meaning of BAS please reply sir
pls share doc as well
It took me an hour and a half to make it without watching the video, I guess I must practice more 🥲
Hi Can you share the pdf of the drawing for Practice?
Please put robotic arm video
Please Share the 2d drawing for practice purpose... Please sir...
Is there a press brake that bends it?
thank you!
Great video but your detailing has a few errors (One example of this: the overall length of a bent part should be in brackets () {indicating that the length of the bent part is not the absolute length but only a reference}). In-fact, all bent dimensions should be in brackets (). Also, you indicated the material thickness in all 3 bends in a single view when you could have just indicated this in the over-all dimensions (only once: as this dimension would only need to be mentioned once to show the material that would need to be ordered)
Honestly, do you think that would keep me from hiring you? If you were to demonstrate ability up to the point where all I had as criticism was brackets vs no brackets, I'm pretty sure you'd be hired. There is a difference between innate talent vs trained talent. Your critique is misguided, in my opinion.
@@sevendesign1805 and then when a machinist mis-reads the dims because its different to every other drawing he has seen, you then realise you should have been more critical of the guy who cant follow simple industry standards.
Can I get the drawing so I can practice without seeing the solution. I need the practice for CSWE. Thanks for the help.
Found it on the facebook page.
What is the configuration pc or laptop need.
thanks sir
adam adammm yaa bu
Want to know more about analysis can help?
Can we get pdf drawing of it?
is possible to download 2D plans?
Sir where i can get drawing
Sir mai sheet metal die ki desing sikhna chata hu pls help me
Can you please give this drawing pdf.
hi sir where is the 2D drawing video . can u give me 2D drawing VIdeo or PDF. Thanks
Please can you do more of inventor and less of Solidworks because not everyone is able to get Solidworks. Please
हिंदी में वीडियो बनाएं। इंग्लिश के लिए सबटाइटल add कर दीजिए।।
Is part ka kya name h
Sir please pdf
I need freelance
0:28
Sir apna wattsup no send kijiye
印度口音
哈哈！你听懂么？
@@idreeskhan-zp5ey 听不懂。
@@孙小圣-d8u 你会Solidworks吗
@@idreeskhan-zp5ey 我会，但是不精通。你在印度哪里？
@@孙小圣-d8u 我不是印度人，也不在印度呀
Thank you