Save $100 Using Discount Code: ManCrafting ton any Langmuir Crossfire Table Affiliate Links: Langmuir Crossfire and Crossfire Pro store.langmuirsystems.com?aff=2 Affiliate Links: Save $100 on any Langmuir Crossfire Table with Discount Code: ManCrafting Langmuir Crossfire and Crossfire Pro store.langmuirsystems.com?aff=2 HTP Affiliate Links: Multi Process Pulse MIG Welder usaweld.com/collections/htp-america-mig-welders/products/pro_pulse_220_mts?ref=3tijle_owkg TIG Welder usaweld.com/collections/htp-america-tig-welders/products/invertig-221-ac-dc?ref=3tijle_owkg&variant=31782387581011 Plasma Cutter Used in my videos usaweld.com/collections/htp-america-plasma-cutters/products/microcut-875sc-v2-plasma-cutter?ref=3tijle_owkg&variant=27839354536019 Table Torch usaweld.com/collections/htp-america-plasma-cutters/products/microcut-875sc-v2-plasma-cutter?ref=3tijle_owkg&variant=27839354536019 Welding Helmet usaweld.com/collections/optrel-vegaview-2-5/products/vegaview-2-5?ref=3tijle_owkg MIG Gloves usaweld.com/collections/clothing-gloves-1/products/htp-america-split-leather-mig-welding-gloves?ref=3tijle_owkg TIG Gloves usaweld.com/collections/clothing-gloves-1/products/htp-america-top-grain-leather-tig-welding-gloves?ref=3tijle_owkg&variant=31472054403155 Best Setup I’ve owned for sharpening my Tungsten Electrodes. I’ve made some, I have bought add-on accessories for my dremel. This is the best. usaweld.com/collections/tungsten-grinders/products/htp-america-tungsten-grinder?ref=3tijle_owkg&variant=27910084755539 Sales! An amazing MIG welder. If you want a basic MIG welder that performs… Check this out. usaweld.com/collections/htp-america-mig-welders/products/htp-america-mig-200i?ref=3tijle_owkg Air Compressor with adequate capacity amzn.to/2PFPo7X Amazon Affiliate Links: Shelf Brackets I replicated amzn.to/2z1MhEp Certiflat Weld Table weldtables.com/#_a_cust8g Heavy Duty Magnet Square amzn.to/2dycStl Magnet Level amzn.to/2cS2ZYV Round Metal Marker amzn.to/2dMikvI Marker holder and 12 refills amzn.to/2dCLTks Heavy Duty Gloves amzn.to/2dMiqDD Standard Reverse Measuring Tape amzn.to/2ut3PRK Flatback Series Tape Measure 16 Foot amzn.to/2fgdIQQ Evolution Power Tools EVOSAW380 15-Inch Steel Cutting Chop Saw amzn.to/2dMhkb4 Photo, Video & Film Production Studio Essentials amzn.to/2dMiP9f USB Microphone - Silver amzn.to/2dewgA5 Sony Digital Still Camera amzn.to/2dJcAA0 Air Compressor with adequate capacity amzn.to/2PFPo7X Amazon Affiliate Links: Mild Steel TIG Rod amzn.to/2Di9VeX Stainless Steel TIG Rod amzn.to/2Dke8hZ Aluminum TIG Rod amzn.to/2Dm8Q5Q My Welding Helmet amzn.to/2GiNI11 RAZORWELD TIG 200 amzn.to/2Iw5a5N Jody's Helmet amzn.to/2DgkTBG My Gear Welding Jacket amzn.to/2IqYhCF TIG Welding Gloves amzn.to/2Dh36KA Helmet Bib amzn.to/2Iqp9mg
If you get the Gooseneck dies from SWAG you will be able to do much more with your setup. I bought all 3 sets they offer and very glad I did. Good luck with everything.
TheGarageEngineer thanks Dennis. Glad you enjoyed it. I really enjoyed getting to hang out for a while today. Hopefully we can come up with a project soon.
at the end of this video, that is mancrafting to me, the raw unedited conclusion,I but it had me restart your video to watch the process again because now I'm more interested in seeing what and how delivered this result . This is awesome!!
Your channel is getting better and better dude love it I have a crossfire pro also got it in Aug. You know to deal 3 to 4 month wait I have been working on put together for a while it's taken me long I am handicap an sick right now. And not help so takes a little time BUT I have it that is the big thing .it is cool MY NEXT THING IS THiS Swag fingerbreaker. Thanks for the video. Very well done . 👍 God Bless America 🇺🇸
Thanks so much. That means a lot. It's definitely a wait, but for me, it was totally worth it. Every time I run it, it brings me a smile. Hopefully, you'll be healthy enough to enjoy yours as well.
It adds a dimension to the shop that wasn’t really possible before. Well anything is possible. With enough time and ingenuity but this makes it easier. Are you working on any projects right now?
Mike Lucas that’s actually a great question and one I figured out making the shelf bracket. So on the first bend a full break is fine. But once the first bed is created that material interferes with creating the second bend. Removing a finger allows a space for the material to move into as the second bend is made.
Dude, you’ve really upped your welding game! Nice job on that build. Looking forward to seeing what you come up with next. You’ve got some good fabrication tools now.
Knowing you I’ll see it in your shop in a week or two. 😁. I haven’t forgotten. Well I had until you mentioned it. Spoon. I will make a spoon. Soon. On my list right now.
I used the original brackets to support my HTP Plasma Cutter on the wall vs a cart or under the plasma CNC table. I made a bunch more just to put shelves on in my shop for storage. I could get brackets from Amazon. Still waiting on them and I already have the shelves up and full of wood, tools and supplies for the shop.
PhunKiss Artistic Creations thanks Henry and or Paula. Hopefully I’ll be back up there soon for a class. It got cancelled the weekend before I was supposed to be up there. Hopefully it will get rescheduled soon. It will mean this inanity will have passed.
You’ve come a long way Chad. Great video as always and I may even pick one up. I’m looking to upgrade my welders and was wondering did you look at everlast as well as the HTP . I want to move into a all in one unit soon.
Thanks Mark. I personally have not owned an Everlast but from a few people that have owned one the seem to be happy. There is a guy that bought both on UA-cam and did a bunch of side by side tests and chose to keep the HTP and return the everlast. That wouldn’t have made my decision though on its own. What really made my decision was the way Everlast’s official UA-cam channel replied to the videos in the comments. It was a little off putting. I’ll see if I can find it and give you a link. .
Malt & Make man I miss you. Love when you say things like “Great bit of Kit.” I appreciate you taking a minute of your downtime to watch. I know you have to be exhausted James.
ManCraftingTM Yes! That Magnetic brake is something but caps out at 16ga. There have been plenty of brackets I’ve tigged up that could have been easily bent on a press like that.
Yep. It’s super versatile and I’ve added a few more components after using it yesterday. Can’t wait until the post office trudges up the driveway on Thursday. 🤣
House of Chop I’m pretty sure they are starting to hate me at the house. They used to just hate me at my store. 😂 now they know where I live. I’m getting everyone I catch on video delivering a heavy box gift cards and am considering taking a box of donuts to the Post Office when they open up to the public.
@@ManCrafting You're assuming I know stuff about juicing apples, but I do not 😂 Honey crisp are probably the best apple, though, so maybe those are also the best for juicing?
Save $100 Using Discount Code: ManCrafting ton any Langmuir Crossfire Table
Affiliate Links:
Langmuir Crossfire and Crossfire Pro store.langmuirsystems.com?aff=2
Affiliate Links:
Save $100 on any Langmuir Crossfire Table with Discount Code: ManCrafting
Langmuir Crossfire and Crossfire Pro store.langmuirsystems.com?aff=2
HTP Affiliate Links:
Multi Process Pulse MIG Welder usaweld.com/collections/htp-america-mig-welders/products/pro_pulse_220_mts?ref=3tijle_owkg
TIG Welder usaweld.com/collections/htp-america-tig-welders/products/invertig-221-ac-dc?ref=3tijle_owkg&variant=31782387581011
Plasma Cutter Used in my videos usaweld.com/collections/htp-america-plasma-cutters/products/microcut-875sc-v2-plasma-cutter?ref=3tijle_owkg&variant=27839354536019
Table Torch usaweld.com/collections/htp-america-plasma-cutters/products/microcut-875sc-v2-plasma-cutter?ref=3tijle_owkg&variant=27839354536019
Welding Helmet usaweld.com/collections/optrel-vegaview-2-5/products/vegaview-2-5?ref=3tijle_owkg
MIG Gloves usaweld.com/collections/clothing-gloves-1/products/htp-america-split-leather-mig-welding-gloves?ref=3tijle_owkg
TIG Gloves usaweld.com/collections/clothing-gloves-1/products/htp-america-top-grain-leather-tig-welding-gloves?ref=3tijle_owkg&variant=31472054403155
Best Setup I’ve owned for sharpening my Tungsten Electrodes. I’ve made some, I have bought add-on accessories for my dremel. This is the best. usaweld.com/collections/tungsten-grinders/products/htp-america-tungsten-grinder?ref=3tijle_owkg&variant=27910084755539
Sales!
An amazing MIG welder. If you want a basic MIG welder that performs… Check this out. usaweld.com/collections/htp-america-mig-welders/products/htp-america-mig-200i?ref=3tijle_owkg
Air Compressor with adequate capacity amzn.to/2PFPo7X
Amazon Affiliate Links:
Shelf Brackets I replicated amzn.to/2z1MhEp
Certiflat Weld Table weldtables.com/#_a_cust8g
Heavy Duty Magnet Square amzn.to/2dycStl
Magnet Level amzn.to/2cS2ZYV
Round Metal Marker amzn.to/2dMikvI
Marker holder and 12 refills amzn.to/2dCLTks
Heavy Duty Gloves amzn.to/2dMiqDD
Standard Reverse Measuring Tape amzn.to/2ut3PRK
Flatback Series Tape Measure 16 Foot amzn.to/2fgdIQQ
Evolution Power Tools EVOSAW380 15-Inch Steel Cutting Chop Saw amzn.to/2dMhkb4
Photo, Video & Film Production Studio Essentials amzn.to/2dMiP9f
USB Microphone - Silver amzn.to/2dewgA5
Sony Digital Still Camera amzn.to/2dJcAA0
Air Compressor with adequate capacity amzn.to/2PFPo7X
Amazon Affiliate Links:
Mild Steel TIG Rod amzn.to/2Di9VeX
Stainless Steel TIG Rod amzn.to/2Dke8hZ
Aluminum TIG Rod amzn.to/2Dm8Q5Q
My Welding Helmet amzn.to/2GiNI11
RAZORWELD TIG 200 amzn.to/2Iw5a5N
Jody's Helmet amzn.to/2DgkTBG
My Gear
Welding Jacket amzn.to/2IqYhCF
TIG Welding Gloves amzn.to/2Dh36KA
Helmet Bib amzn.to/2Iqp9mg
Cool video brother thanks for taking us along for the ride!!
A Glimpse Inside thanks for watching Chris. I hope all is well with the family. Looking forward to your next video.
Nice Job Chad. I don't read directions either.....lol. Keep it up brother your doing great!
Thanks Mike. Did you end up ordering a Laser? My gut is telling me you took the leap? ;-)
Sweet little upgrade to the shop.
Thanks Jim. How’s everything? I hope you’re getting through this time of craziness without any problems.
@@ManCrafting Not much changed around here. They don't let me out much at the best of times. Public safety concerns and all that you know....lol.
Jim Dockrell social distancing before it was required. 🤣
Turned out great Chad, awesome job! 😃👍🏻👊🏻
Thanks Fred. How are you doing up there in NY? Everything good with you and the family?
@@ManCrafting yeah, we're good, thanks for asking, I hope you and your family are doing well.
nicely done chad
jp woodwork thanks Jamie. Trying to get more regular with videos like you. How’s everything in the UK?
@@ManCrafting MEH!! LOL..... Plodding along :)
I hear you. Strange times we are living in yet I’m grateful for technology that makes it possible for use to stay connected.
Cool little brake!
Thanks Greg. How is everything in CO? Business as usual I hope. I was hanging with Tom here at the shop about a week ago.
If you get the Gooseneck dies from SWAG you will be able to do much more with your setup. I bought all 3 sets they offer and very glad I did. Good luck with everything.
I already got them. Probably a month or two after this video. Complete game changer.
Good explination of the build process. Cant wait to see future projects using this system.
TheGarageEngineer thanks Dennis. Glad you enjoyed it. I really enjoyed getting to hang out for a while today. Hopefully we can come up with a project soon.
I just finished up some brackets. I think I’ll post them in my community tab.
at the end of this video, that is mancrafting to me, the raw unedited conclusion,I but it had me restart your video to watch the process again because now I'm more interested in seeing what and how delivered this result
. This is awesome!!
Thanks for watching. You know where my shop is. You’re always welcome to drop by and give welding, bending or plasma cutting a shot. 👍🏼
Your channel is getting better and better dude love it I have a crossfire pro also got it in Aug. You know to deal 3 to 4 month wait I have been working on put together for a while it's taken me long I am handicap an sick right now. And not help so takes a little time BUT I have it that is the big thing .it is cool
MY NEXT THING IS THiS Swag fingerbreaker. Thanks for the video. Very well done . 👍
God Bless America 🇺🇸
Thanks so much. That means a lot. It's definitely a wait, but for me, it was totally worth it. Every time I run it, it brings me a smile. Hopefully, you'll be healthy enough to enjoy yours as well.
Nice welding Chad! I enjoyed watching. Awesome skills and editing!!
Thanks Kevin. Shop is opens anytime you want to drop by.
Nice build Chad 👍👍👍👍
Gib Clark thanks Gib. I hope all the crazy is over soon and we can all meet up soon. Missing the community.
That’ll make things easier. Great project brother!
It adds a dimension to the shop that wasn’t really possible before. Well anything is possible. With enough time and ingenuity but this makes it easier. Are you working on any projects right now?
Cool upgrade, Chad!
Billy
Billy Burt thanks Billy. I appreciate the support.
Nice work Chad 👊🏼👊🏼
Mike Best thanks. I appreciate the comment. It means a lot.
I like the end! The whole video was very informative!
John Grosklags thanks Dad. Always nice to get your fathers seal of approval. 👍🏼
Never had a brake before. Why a finger brake over the full press brake version?
Mike Lucas that’s actually a great question and one I figured out making the shelf bracket. So on the first bend a full break is fine. But once the first bed is created that material interferes with creating the second bend. Removing a finger allows a space for the material to move into as the second bend is made.
Looks great!
Thanks Joe. Appreciate you stopping by and taking a minute to comment. Whet are you dropping your first video?
Probably tomorrow 😅
Dude, you’ve really upped your welding game! Nice job on that build. Looking forward to seeing what you come up with next. You’ve got some good fabrication tools now.
Works by Solo thanks Bernie. That means a lot coming from you. Can’t wait to see what you come up with next.
Thanks. I’m working on it. Weather has been ideal for being out there welding. I want to get to the point I’m happy with every weld. TIG and MIG.
Nice upgrade. That should be useful.
Thanks Clinton. I have a few more upgrades on this press but it already is making projects I couldn’t do possible. Even without those upgrades.
Great job Chad! We will be making some great things in the future.
Doug Henico sorry I missed you call yesterday. Come by when you’re feeling better and we can figure out something to cut on the table.
I’ve always wanted one of those press breaks
Knowing you I’ll see it in your shop in a week or two. 😁. I haven’t forgotten. Well I had until you mentioned it. Spoon. I will make a spoon. Soon. On my list right now.
I always learn something from you buddy! Great video!
Yellow Mug Inc.- Stu I appreciate you watching and taking time to comment. I now it’s late. Get some rest. Plenty of beauty sleep.
This is as really well done. Enjoyed the entire video. This may be the best editing you have done. 👍🏼
Jodie Grosklags thanks I appreciate that. Stayed up late editing. I’m glad it paid off.
That thing looks seriously stout Chad. Nice build man. What are you using that bracket to support?
I used the original brackets to support my HTP Plasma Cutter on the wall vs a cart or under the plasma CNC table. I made a bunch more just to put shelves on in my shop for storage. I could get brackets from Amazon. Still waiting on them and I already have the shelves up and full of wood, tools and supplies for the shop.
That's an awesome brake and I really enjoyed the video. Stay safe Chad!
PhunKiss Artistic Creations thanks Henry and or Paula. Hopefully I’ll be back up there soon for a class. It got cancelled the weekend before I was supposed to be up there. Hopefully it will get rescheduled soon. It will mean this inanity will have passed.
You’ve come a long way Chad. Great video as always and I may even pick one up. I’m looking to upgrade my welders and was wondering did you look at everlast as well as the HTP . I want to move into a all in one unit soon.
Thanks Mark. I personally have not owned an Everlast but from a few people that have owned one the seem to be happy. There is a guy that bought both on UA-cam and did a bunch of side by side tests and chose to keep the HTP and return the everlast. That wouldn’t have made my decision though on its own. What really made my decision was the way Everlast’s official UA-cam channel replied to the videos in the comments. It was a little off putting. I’ll see if I can find it and give you a link. .
Mark Lengal here is part one. There are three more videos. ua-cam.com/video/SYRAP5urXk8/v-deo.html
Really enjoyed this one and looks like a great bit of kit!
Malt & Make man I miss you. Love when you say things like “Great bit of Kit.” I appreciate you taking a minute of your downtime to watch. I know you have to be exhausted James.
This is so cool !!!!
Emily Grosklags thanks. I appreciate the support. 🙏🏼
I was here
Driveway Workshop with Jim Beshears thanks Jim. Did you enjoy the video?
Yea it turned out nice. It will be good to see what you make with it.
Driveway Workshop with Jim Beshears I’m excited. I have a few more upgrades to make but you will see it in future builds for sure.
I’ve been putting it to use. Made shelf brackets and hangers.
I just made some shelf brackets and some hanger to store a step ladder and some folding chairs.
Great video! Cool project and love the way you wrap things up. :) Can't wait to see more videos!
Patty Miller thanks. I really appreciate you taking the time to comment. Let me know if you need any metal bent or welded. Or cut. Or or or.
Enjoyed the video Chad. I’ve wanted one of those brakes for the longest time. It was good to see how it all goes together. Kudos sir 🔥👍🏼🔥
House of Chop thanks Phil. It’s hard to imagine when you have the brake you have. That said. Different purposes. Still. That brake. 🔥
ManCraftingTM Yes! That Magnetic brake is something but caps out at 16ga. There have been plenty of brackets I’ve tigged up that could have been easily bent on a press like that.
Yep. It’s super versatile and I’ve added a few more components after using it yesterday. Can’t wait until the post office trudges up the driveway on Thursday. 🤣
ManCraftingTM Our poor post people! 😂🙌🏼
House of Chop I’m pretty sure they are starting to hate me at the house. They used to just hate me at my store. 😂 now they know where I live. I’m getting everyone I catch on video delivering a heavy box gift cards and am considering taking a box of donuts to the Post Office when they open up to the public.
This seems like a highly inefficient apple press. Very helpful video on how to construct it, though.
🤣 ahh. But now I have the tools and an idea that could make it more efficient. 😁 thanks. 🙏🏼 what’s your favorite apple for juice or cider?
@@ManCrafting You're assuming I know stuff about juicing apples, but I do not 😂 Honey crisp are probably the best apple, though, so maybe those are also the best for juicing?
Those honey crisp apples are probably bad for you they taste so good. My absolute favorite.
I don’t know what else to say either daddio
Emily Grosklags ummm. What did you think of the video. Good, bad indifferent? Remember. I pay the bills. 😁
I hate camera welding!
Bobcat Service Richard sorry man. I should have told you to wear your squints. How’s the Bobcat business treating you?