Great explanation of the machine! I have the same model and I’m trying to run an auger on the hoe, when I switch the rocker switch from extend hoe to aux the extend hoe continues to operate, is this normal? I also get no power to the auger.. (I’m activating the HI FLOW whist trying this) even though I can hear the hydraulics working hard I get no rotation with the auger when operating the thumb stick. Mines a 2016 doesn’t have the “live” function. Would be awesome I hear your thoughts The auger is brand new and within specs and full of oil. I have no problem running hi flow attachments on the front.
Hey Lachlan, I apologize for not getting back to you sooner. Your comment slipped through the cracks. Did you get this resolved or are you still having issues running your auger on the excavator end?
I could use a tutorial on how to use the creek function while digging an you can creep with the tracks forward an then question number to is there I high an low speed or is 4.6 mph it?
It's a single speeed machine. You can adjust ground speed slightly with the knob that is in front of your right knee as you are sitting in the operators seat faced forward towards the loader end of the machine. Turn that knob all the way to the right and you will get the fastest ground speed, but give up some torque, so it won't push great with that knob all the way to the right. With it all the way to the left you will move slower but you get more torque so more pushing power.
Great video, I have a 2020 cxt and learned a few things. But I still haven't figured out how to use high flow yet, I just hear the pump bog down and nothing happens with the attachment. Any advice?
Thanks for the video. Very interesting. I have a question. My 1CXT only has one button on top of the left joystick which is the horn and then the lower override button. How do I activate the controls on the machine to get it going. I have to hold the override button all the time to get it to operate. While facing forward and having the switch in loader mode it does operate the loader, not the backhoe like yours. I can't figure this out. Thanks.
@@christiannicholson7848 Ok, let me see what i can find out. I haven't personally ran that style of joystick yet, but i'm confident i can find out for you
@@weldcojcb Thank you very much. To be clear, just one button on the top of the left joystick then the Fwd / Rev rocker on the right joystick. No green light on the right joystick like yours either. Otherwise the machine looks the same as the one in your video.
Are you referencing the part about when you run the controls facing the opposite direction of the controls you're running? I'm not sure what you are referencing here. I could definitely be wrong about something in the video, just not sure what part you are referencing.
@@SCAROLINABUFF I don't remember having to press that triger button and getting the buzzing sound when moving the machine forward while facing the excavator. I tested a 2019 model that may be the difference. But I know that sound would be anoying very quick. I'm hoping to get a machine from JCB in February. Everything around me is sold out when it comes to the 1cxt.
@@jlmplosevery 1CXT I’ve ran does require you to hold that override button on the bottom of the joystick and does produce that audible buzzer. Maybe the older machines didn’t work that way, but the machine in the video is a 2019
The fact it has iso makes it so much more attractive
Thank you for the control talk through on a wonderful JCB new type mini.
You're welcome! Thank you for watching
Great video. The correct term for the "nipple" on the joystick is "hat switch"
Thank you Chris! I did not know that.
You are right, sorry about that. That is float for the front loader
Jesus I almost thought you were gonna make the alarm sound for the rest of the video!!!
So what did u say when buzzer was on ??
Great video! Does the loader have float ability for back dragging to level uneven terrain?
Yes it does, it’s on the left hand side of the seat as you’re sitting in the seat. Sorry I missed that, thank you for asking
Great explanation of the machine!
I have the same model and I’m trying to run an auger on the hoe, when I switch the rocker switch from extend hoe to aux the extend hoe continues to operate, is this normal? I also get no power to the auger.. (I’m activating the HI FLOW whist trying this) even though I can hear the hydraulics working hard I get no rotation with the auger when operating the thumb stick.
Mines a 2016 doesn’t have the “live” function.
Would be awesome I hear your thoughts
The auger is brand new and within specs and full of oil.
I have no problem running hi flow attachments on the front.
Hey Lachlan, I apologize for not getting back to you sooner. Your comment slipped through the cracks. Did you get this resolved or are you still having issues running your auger on the excavator end?
I could use a tutorial on how to use the creek function while digging an you can creep with the tracks forward an then question number to is there I high an low speed or is 4.6 mph it?
It's a single speeed machine. You can adjust ground speed slightly with the knob that is in front of your right knee as you are sitting in the operators seat faced forward towards the loader end of the machine. Turn that knob all the way to the right and you will get the fastest ground speed, but give up some torque, so it won't push great with that knob all the way to the right. With it all the way to the left you will move slower but you get more torque so more pushing power.
Great video, I have a 2020 cxt and learned a few things. But I still haven't figured out how to use high flow yet, I just hear the pump bog down and nothing happens with the attachment. Any advice?
Sorry Chris, just saw your comment. I have a 1CXT coming in soon and I can shoot a video just on the comments people have left
Chris did you have any luck I’m having the same issues?
@@weldcojcb thanks, I appreciate it
@@lock425891 no, not yet unfortunately
How much is it selling for? Where is it located?
This machine sold last Friday 12/31/21.
sorry you missed one on the left side on the seat
That's float for the loader. Sorry, that button is in a weird spot and I missed it when shooting this video.
Thanks for the video. Very interesting. I have a question. My 1CXT only has one button on top of the left joystick which is the horn and then the lower override button. How do I activate the controls on the machine to get it going. I have to hold the override button all the time to get it to operate. While facing forward and having the switch in loader mode it does operate the loader, not the backhoe like yours. I can't figure this out. Thanks.
What year is your machine?
@@weldcojcb It's a 2015 model.
@@christiannicholson7848 Ok, let me see what i can find out. I haven't personally ran that style of joystick yet, but i'm confident i can find out for you
@@weldcojcb Thank you very much. To be clear, just one button on the top of the left joystick then the Fwd / Rev rocker on the right joystick. No green light on the right joystick like yours either. Otherwise the machine looks the same as the one in your video.
@@christiannicholson7848 where are you located?
I tested one of those, not sure the auditory control is actually true.
Are you referencing the part about when you run the controls facing the opposite direction of the controls you're running? I'm not sure what you are referencing here. I could definitely be wrong about something in the video, just not sure what part you are referencing.
@@SCAROLINABUFF I don't remember having to press that triger button and getting the buzzing sound when moving the machine forward while facing the excavator. I tested a 2019 model that may be the difference. But I know that sound would be anoying very quick. I'm hoping to get a machine from JCB in February. Everything around me is sold out when it comes to the 1cxt.
@@jlmplosevery 1CXT I’ve ran does require you to hold that override button on the bottom of the joystick and does produce that audible buzzer. Maybe the older machines didn’t work that way, but the machine in the video is a 2019