A sub 250g 3.5" FPV Freestyle Beast: Introducing the AOS 3.5 V2
Вставка
- Опубліковано 2 сер 2024
- AOS 3.5 V2 now in coloured carbon: www.cncdrones.com/AOS-35-v2_p...
Just because a quad cannot weigh more than 250g doesn't mean that we shouldn't strive for the speed, power and agility typically only available from heavier drones. With the AOS 3.5 V2 you can go toe to toe with 5" freestyle quads with similar flingability and smoothness, while carrying a Caddx Peanut or Insta360 Go, and staying under 250g!
If you'd like to support more videos like this: / chris_rosser
Join the Discord! / discord - Наука та технологія
Best frame I ever flew. Wow it's so sharp and clean flight feell! Thanks you are a genius. 🤟🏼
Love the v1 definitely going to pick up the v2..awesome video 📹 cheers 🍻 Chris
Thanks! I appreciate the support.
BRILLIANT idea!!!!
Iflight hook up was a great idea 💡!!!!
Love your frames keep them coming!!
Thanks! Will do 🙂🙂🙂
Your noise plots always look phenomenal!! Home run!
Thank you. Vibration performance is kind of my thing 😁
This looks from another planet. Just bougth two! Love sub 250g
I what the introduction to all the aos lineup I enjoy the engineering and ingenuity
Brilliant!!
OK I'm convinced! AOS Tune and AOS Frame, this thing flies noticeably better than any other quad I own.
Huge fan of the AOS frames 👍
I just finished my AOS5 v2 now my 3.5 v2 will be here Monday and I start my build can't wait loving the frames
Thank you! I'm really glad you are enjoying my work.
Looks good! No standoffs between the camera side plates makes me nervous though. Would be nice to have holes for the optional use of 20mm standoffs. May I ask about the max stack height? Any plans for a future low-profile option? 15mm would be perfect.
A lot of 3.5s that have came out recently always seem to be missing that standoff. I guess the idea is it’s not all that necessary on such a light weight build that won’t crash as hard
YAY! this frame looks awesome! Are you going to make a 4"? Please? I fly less flippy floppy and more swoopy crusey so I've found 4" are better for smoother flights.
I legit want to buy all these frames, I already bought a few ☺️
Chris, I think what are you doing is great, you are one of the best FPV youtubers, just behind JB of course ;-) but OMG that build is so messy, motors cables looks like a wounded octopus
Agreed. Some of my newer builds are cleaner, I promise!
will try this out, the V1 3.5 flies fantastic
Hi Chris, after few months with the AOS3.5 V2 I can say that the M2 standoffs are fragile and the m2 bolts intend to open very quick. every 3-4 packs the arms get loose. iFlight includes very low quality bolts that strip at the second you try to lock them. in the countersteer version there is not enough thickness at the bolts edges (where the standoffs are) and i've broke the upper plate in that area. hope that the V3 will be stronger
The screws are just too short. 2mm longer are better. Locktite is also recommended
Love the frame but completely agree. The 2mm bottom X plate holding the arms together with the countersunk screws is an obvious weak point. The 4mm arms are no good if the X plate is so thin it shatters instead at the screw. Happened to mine and good luck finding replacement parts! Awesome drone frame, shame you can't get parts in Europe, tried and failed. I had to order a full new frame from iFlight in China just to replace that single tiny piece. (CNC Drones in Canada stocks the part but charge a mint for shipping to EU making it nearly as expensive as a new frame from China, and iFlight EU doesn't sell the part alone). So while I wait for the frame from China lets see what I can make out of stainless steel and a Dremel. Not ideal...
@@dronevideography Damn, this just happened to me! And still no spares over here :(
@CoopzVideo where are you? Worth emailing iflight to see if they have any even though bit shown on the website. Also the new versions of the frame come so fast that they discontinue parts for previous versions making it impossible to fix broken parts due to subtle changes in size, shape etc... I stockpiled parts luckily early after buying the frame.
@@dronevideography I'm in the UK. Good shout, I might give them an email, I bought the frame from iFlight EU originally. I did follow up asking to buy spare arms but never got a reply and fortunately never needed any. I joined the AOS discord tonight and got a reply from Chris saying CNC Drones can supply all spares and can deliver to the UK in a week. Had a quick look and delivery is $19 CAD (£11) which doesn't seem too bad, especially if I buy a few spares. 2 x 'X Plate Cross Brace' (Buttonhead instead of countersunk!) and 2 x Replacement Arms for £23 delivered is better than buying the V5 frame for £58 + shipping. Wish I had stocked up like you, but I've done that in the past and ended up with loads of spares I never used - I just can't win haha.
What a beautiful frame, it has finally more organic joints !
Do you ship to France ?
Hi Chris, great work! I've bought AOS3.5 from drone racer-fpv (Iflight production) and quad fly very well! One question arms protections from thingverse doesn't fit do you have an STL file for AOS 3.5 v2? thank you!!!
What the max speed ?
Hey Chris, i am really interested to build one of yours, but not sure which motor would fit best for my 6s 660mah lipos. Just sold all 4s 850 and dont wanna rebuy again! Just found something like 1404 2750kv, but guess thats still too much kv and dimensions could be more!? Maybe you got an idea 😁
Hey Chris I would like to mount a 20x20 stack and a caddx vista. Is it possibile to use 2 20x20 solts simultaneously?
imagine ordering a V1 on the April 25th, it shipping on the 28th, and this dropping on CNC Madness on March 2nd. F. lol
I basically did the same lol 😆
@@thfpv4974 such is life I suppose. I do expect that the V1 arms will be a little more durable, those 10g ain't free. Obv they are still great for resonance, but the point where the struts meet will for sure be a failure point. At least that's what I'm telling myself haha.
I picked up the V3.3 BnF version of this from iFlight with their recommended 850mAh batteries. The weight is 287g. Is this because it's got the DJI 03 air unit? Is there any way to get it under 250g? The iFlight website said "Discover the future of sub 250g FPV".
Hi Chris, the work you've done on this frame is greatly appreciated by the community, I'm picking it up for a 3.5" build but I wanted to ask for your opinion on my 5" Catalyst Machine Works Shocker UL, it's got a similar arm design with front and rear braces and I wonder if you've ever looked at it and have any thoughts on it's resonant performance? Also, how durable is the AOS 3.5? If I put 2104 motors on it would it be a durable basher? Or is it primarily suited for sub 250g?
2104 would be a bit big for 3.5" freestyle IMO. I run 1504s and they're plenty powerful enough. I wouldn't say the frame is a basher it's on the lighter side, ideal for park flying but probably not for repeated impacts into concrete.
I can run the CMW Shocker Tank (Imperial motors) & HD (2203 t mount) (both with the addon rear back braces) using the tight AOS filter tune with very similar plots. Flies wonderful without all the motor rumbling/resonations that I get from my traditional arm frames. I'm so close to buying a bunch of AOS frames especially for my 7" now haha.
Great video as always. One question, please, regarding of choosing the right motors. At this moment 1504 3100 KV motors are complicated to find. What do you thing is a good alternative? Go to 1404 or 1505? Thanks
I use 2203.5 and it just flies great
what kv range would you reccomend for 3.5'' size? Thanks for the video i just purchased this frame!
is there a quality difference, if i buy the frame from cncdrones, armattan or iflight? did you compare them?
Awesome…. I saw it in cncdrones last week and ordered it. Just the 3.5 frame I’ve been looking for :-)
One question… what is the distance between the top and bottom plate?
Would help if you watched the video
Mystery D ummmm… yeah I watched it twice but didn’t see where the height between the bottom and top plate was mentioned… do you have a time stamp you can share? That would add some value to your reply to my comment. Thank you!
Standoff height is 20mm 👍
Hello!
I am a newbie in this hobby (flying whoop for 3 months). I want to build an analog quad on this frame.
I think to build 4S freestyle with Mamba f722 55A 30mm stack flight controller and ESC. May be it's heavy (~25 grams), but it has big soldering pads (better for newbie?). I know that iflight Beast 55A (~9 grams) would be better choice, but I worry that my soldering skills are not so good.
And the motors will be 1504.5 3950 KV.
What do you think? What are your recommendations?
Seems I can't shop the Xing 1504 3100kv in Europe (or even on iFlights own page), out of stock or not listed at all. Can you recommend another one with similar performance?
Hi Chris, I bought this exact frame but have a hard time choosing the right screw for the right hole. Do you have an explosion diagram of the v2? I looked at iFlight docs but found nothing. Thank you! Frame looks strong, light and super versatile.
Sorry for the dumb question. There is only one way to put it together. Best frame ever.
I noticed what I'm guessing is the Caddx Vista antenna zip tied to one of the arms. In the past, you've addressed things that can cause resonance. I'm assuming there are no major issues with the stub not being secured?
Strapping the antenna to the arm is enormously better than any TPU mounted antenna in my experience. The stub doesn't move much at all and is lightweight which also reduces vibration.
Chris - could you please share your tune / filter settings for the AOS 3.5 V2? I thought you did somewhere but I can’t Find it now that I have my build done. Thanks!
I tried building mine with a HDZero Freestyle vtx but no matter how I tried stacking things I wasn’t satisfied with the result. You must have had a vision for this since you included the holes specifically for that vtx. Could you share how you had planned to do that? Cheers and thanks again for all the great info and gear!
A few people have built it very successfully with freestyle VTX and 30mm AIO in the central stack. 👍
@@ChrisRosser bah I was hoping that wasnt the answer haha since no one has any 30x30 aio's in stock here in Canada. However... I'm getting it back together with the AIO in the front 25x25 and the freestyle mounted in the centre with just the 3 rear 30x30 holes. The clearance is there and as long as I get the vtx locked in well enough with just 3 points I'm somewhat optimistic.
Would 2S 18650 with 1303.5 5500kV motors work fine as LR cruiser? But not sure about mounting position for GPS.
Hi Chris, Great job! It convinced me and i just ordered the frame (in blue). I ask myself a question, why 1504 3100 kv while the 1404 4600 kv (also from IFlight) have very similar performance with reduced weight?
The extra 100g of thrust perks up the performance and the 14p 1504 is smoother and runs cooler than the 12p 1404.
@@ChrisRosser Thank you for the answer. I understand perfectly for smoother and cooler. But for the thrust, the difference between the 1504 3100 kv and the 1404 4600 kv is less than 5g. And the 1404 is lighter (3g)
Definitely needs new recommendations based on actual component availability.
Diatone Mamba Toka 1505 - 2650KV/3800KV are available. So 2650 for 6s and 3800 for 4s?
And now it is even hard to find four diatone 1505 motors from a single shop. HIFIONRC CUCKOO 1505 3550KV any good?
you could get this 20g lighter with the new Walksnail Avatar Mini 1S VTX
19:57 Don't f4's running 4k need gyro LP2 on at ~800hz due to aliasing of gyro data, regardless of frame performance?
Yes, a pt1 at 1k is sufficient for that.
Doesn’t putting the FC away from the center mess with the flight characteristics, particularly pitch and yaw?
This is a great looking frame and I'm impressed with teh blackbox of the frame. I recently sold all my larger drones and want to build a sub 250 freestyle drone. I have all my electronics (T-motor stack f722 mini and 35a 4 in1 esc, vista, crsx fire receiver. How do you think this will fly with FPVcycle 2203-3450kv motors? I have a set of these already. so far I'm looking at just a frame purchase unless your recommend different motor sizes. thank you
I would recommend 1504 size motors for this frame. You can try 2203 and see how it flies. 👍
Is there a tune for this WITH a BMI 270 gyro. I feel like I have mine flying ok, but I still don't have it as good as I want. Didn't you say you were going to have presets?
I'm on 4.3, with a Vista, I. F. Beast F7, 1404 3800KV, and I am running Mouses tune, with dynamic idle, once thing about that, is air mode is not on. I don't know if that part of that tune with dyn. Idle, or not. So if you have time for some input, that would be great.
Will you do a noise comparison between cncmadness and iflight frames ? 😇
very nice! is there enough VERTICAL height to mount the 1W HDZero VTX and an AIO on top of it? thanks! BTW, I just asked Drone-FPV-Racer (a retailer based in france) if they're going to carry your frame, and let them know they can get it from iFlight. thanks again!
The 1W vTx is 30x30mm and an AIO is 25x25mm so it would not work on any frame.
Yes the 1W vtx is 10mm tall which gives you 10mm for a 30x30 AIO.
30x30 AIOs are available.
@@ChrisRosser thanks
@@truggles120 WHAT? never heard of 30x30 AIOs?!? 😂😂😂
Hi Chris, just bought this frame. Planning to build this with full gopro6 and I have few packs of 4s 850mah. I do have a spare set of xing 2005 from my broken chimera5. Would that be ok for this build? Or is it too heavy? Not too concerned with 250g limit, but hoping it will still let me fly not less than 3mins. Cheers!
Yes should work fine!
I bought this frame, now I want to choose the motors I have a choice of xing 1408 3600kv or emax 1606 3300kv. Which will be better?
can I fit a full size walksnail VTX and a fettec 35A AIO fc in this?
@Chris Rosser What is a good substitute for those motors? They are out of stock everywhere. I have the 1504 but in a 3900kv would they be too much?
The 1504 3900Kv should be good on 3-4S 👍 Diatone Mamba Toka 1505 are good too!
@@ChrisRosser thank you sir I have eight of the 3900’s on the rigs I’m dissecting for these anyway
Hi Chris! Pretty excited to do my build but the Xing 1504 3100KVs are pretty hard to find here in Australia. Can you point me in a direction where I can figure out more options? I was thinking BortherHobby 1504.5 2950 or 3950... Have you any thoughts on other options?
Very much apprecaite it! Thank you!
Tmotor 1604
Would the RunCam Hybrid 2 fit in the camera slot?
Hi Chris, can you fit an ND filter with the O3 Air Unit camera between those sideplates? Sorry, if I missed it in the video. Thanks!
Yes you can on the EVO and V5 versions.
Thanks!@@ChrisRosser And sorry for the follow up question: what were the min max camera angles? From the screenshots I guessed that it is 0 to about 50 degrees? Thank you!
0 to 60 degrees with the standard 3D printed mount. Unlimited with a custom 3D printed mount.@@metefpv
@@ChrisRosserPerfect!, Thanks!
With my AOS3.5 EVO 1.2, I have vibrations on the camera and I can see them in my googles I think it’s du to the rubber support. I tried to put some washers but it doesn’t work. I try to find a solution, any ideas ?
Are you using a capacitor on your build/do you think it’s useful in this size?
It looks to be a challenge to put a capacitor within the frame, but having one mounted on the xt30 battery connector end would do the trick
@@hieusaturated not really, my V1 has one and I now am thinking if it’s really necessary to still have it on the V2 😊
(using an AIO, it’s just above it atm)
@@luis_gbs same here. Sits right on top the fc with a bit of a gap still
What about a 1050 mah 4s Lipo on aos 3.e O3 without naked Gopro onboard? Is it good for freestyle or I need 850mah?
Trying this build but with the RCINPOWER SmooX 1507 Plus 3800KV motors. Is this a good motor for this setup?
Hey, could you share pid and filter tuning config for this model ? Or just all betaflight config ?
Personally I prefer 4" for sub 250g builds, better prop selection and higher efficiency. Would it be possible for their to be a version with slightly longer arms?
What props you like?
@@chrisbee5481 Gemfan 4024 and 4023 are pretty good, HQ also has a few good ones but they're a little too flimsy and deflect at high RPM.
@@Bruno-cb5gk I've been building sub250 5 inch and 4 inch too. All on 550mah 6S with 2004 motors. I prefer the 4 inch. The GF 4023 are too low pitched for my kinda power flights.
All other higher pitch 4 inch props are not T mount any more.
So now Im busting the 250g by a little with 5mm shaft 2005 motors.
They need to make more 4 inch props. Like the diatone roma f4 but get it sub250.
@@chrisbee5481 The efficiency of 5" is very tempting but yeah, its a bit big for 250g. If you want more power you can also just go higher KV. I'm planning on going 1804 3500kv 750mah 4s on one of the Gemfan props, I'll just try them both. Are you flying analogue? 550 6S with 2004 motors is quite hard to fit in under 250g.
@@Bruno-cb5gk Im flying with naked vista.
The 3500kv 1804 are what I had last before upgrading. You might as well get the Rekon4 FR.
Why do you choose to put Vista at the front? As drones are usually front-heavy already. There are FPV camera, HD camera already, plus you can't push battery very far to offset that.
CoG is better with the vista in that location if the battery is mounted behind an insta360 go.
Other than Bangood, the Xing 1504/3100KV motors you use don't seem to be available anywhere. Either sold out or stores just don't carry them at all. What would you suggest as an alternative that would get good freestyle performance understanding that a 3.5" lacks the mass and isn't going to get thrown around like a 5"?
Diatone 1505s are great.
@@ChrisRosser Would it be possible to include recommended parts list for every frame for every video? iFlight Beasts are barely available and the one that is comes with BMI270 gyros (not recommended by you over the MPU6000).
These motors are also available only in shady webstores and propeller selection has to be checked from other videos.
Therefore, recommended parts and second or multiple sources for similar components are needed. Are these props for both v1 and v2 frames the same Emax Avan Scimitar 3528?
Otherwise, you have a great and underrated (under subscribed) channel!
@@ChrisRosser Diatone Mamba Toka 1505 - 2650KV/3800KV are available. So 2650 for 6s and 3800 for 4s?
IFlight Xing 1504 seems to be a discontinued product, Diatone Mamba Toka unavailable. After a couple of failed Ali scam orders (one payment still on hold), the only motors available seem to be Geprc 1804 3450KV (about 1g heavier) and T-Motor 1504 3800KV (lighter, less poles/magnets). And of course, Xing 1404.
And Farin frames are made by iFlight. Price seems to be the same while taking into account customs fees and shipping.
Do you have a link I could use for a bind and fly version 😅
i Chris sould be posible naked Hero in here to be sub250 class? thanks
Which motors do you recommend for 3.5
Chris you are man of details but what I find interesting is your AOS website lacks setup and component suggestions for each of your products. Thanks for your content though, good stuff!
I'm working on presets and recommended component lists as more and more pilots are asking for them these days.
Can you run 3.6 inch props on this? And on the 3.5 EVO?
Ture x handles better on stock pids and mount the antenna on top of your quad double the penetration with a long range monodo 180mm geprc with ufl connection
A custom motor mixer can make a big difference for non-true X quads. The benefit of not having the props in view really tips it over the edge for me.
If I choose a color do the arms come in color as well or just the top and bottom plates?
The whole frame!
@@ChrisRosser do they sell color arms as well if so do you know how much
@@headfog7621 Yes they sell coloured arms. AOS 3.5 V2 replacement parts.
@@ChrisRosser thank you for the quick responses , I had emailed them already and they hit me with that link. I figured I had to click your name to get to the replacement parts. I just placed my order of the AOS 3.5 with two replacement arms in gold. Thanks again.
Any chance we get an update to the ultra light 5" frame soon?
I'm doing a LR version without props in view launching next.
I love your frames. However, please give us options for standoff height, which means making different size of camera plates.
Hi Chris, I just bought an Aos 3.5 V2, Xing motors are unobtainable now, I'm looking for a good 1504 motors, BrotherHobby VY 1504.5 2950KV would be a good choice? Thanks.
Yep they are a good choice
@@ChrisRosser Thanks Chris, finally get the Fpv cycle 16mm 3.700Kv, will see…
@@haggy38 hey, after your comment I went and check brotherhobby motors, but 2950kv it's for 6s fersion
@@evgeniygalitsin5084 Thanks man, finally got Fpvcycle 16mm 3.700Kv.... very well used on 3.5 frames in Rotorbuilds...
@haggy38 did you end up getting the motors and if so what lipos are you using with them , looking to get the same on 4s and just want to know the performance?
Thanks
Dual mounting with the FC rotated 90 degrees means motor wires need to be routed across the FC - This is not optimal for vibration. A frame with enough height to allow for both FC and VTX in the central stack position is much better.
You can easily fit a two high stack FC+AIO in the centre if that's your plan 👍
It will available in Bangood?
Any dates for when this will be available in the European market? Preferably from an EU country so we don't have to pay ridiculous import fees.
What is the weight of the frame alone?
looking very interesting is there any in the uk chris ? or could i get one from you my friend?, look forward to hearing from you soon ps am in Buckinghamshire uk ... ... Peace out Cjthedj ✌.
I imagine Unmanned Tech and YourFPV will stock some realtively soon. iFLight should be in production in a week or two.
@@ChrisRosser that's great cheers buddy look forward to trying one out will update my thoughts asap if and when I can get my hands on one to give it a test flight? Peace out chris ✌cjthedj77✌... ...
there's no way you picked up the most sold out components ever
EDIT: you are from the UK! and there's no stock of your frames in the UK, nor any of the components you advise
So where do I buy it?
Come on Chris you didnt fly it?!
Send this build to Master J.B , lets see how he rips it!
I'll post a freestyle video or two in the coming days. Currently travelling for work so no flying for me atm
Are arms for v1 and v2 interchangeable
I'm afraid not :(
Is 1804 2400kv on 3.5inch 6s too much?
That motor feels a bit big to me. But if you don't care about 250g should be fine.
@@ChrisRosser ow yes. 250g is no issue btw. I just want a 5inch 6s in a 3.5inch package.
you have an interesting frame, I really wish to fly it.
But:
1. its not chip ( 50 $ for a frame )
2. if I broke any arm - I need to pay a lot to get spare parts ....
IMHO: May be if you will find a way to get it at least 10\15 $ chipper - they many pilot will be agree to spent the money - and try your bords.
What's the weight difference between v1 and v2 versions of this frame?
-10g
50g vs 40g
The frames top plate looks like it has way too much carbon for a 3 " . I would cut out at least 1/2
A wide platform adds stiffness to key resonant modes. Total weight is around 40g which is competitive with similar frames. 👍
No flight footage ?
exactly
I'll do a freestyle rip over the next few days. Travelling with work at the moment.
"Umm, I showed you a blackbox log from a flight with that build. "
@@MysteryD No one wants to watch a tuning flight.
Exactly the launch of BNF!!!! I dont care to build one im one lazy mofo on my free time from work. 1/3 of the time i don't even fly cause im to lazy to charge lipos and have 6 chargers and can charge up to 28 lipos at once with current charging setup. But only have 60 6s lipos. for 37 new builds i bought since september 2021. Have to many 5in. and need one of these 3.5in. and want a falcon 7 long range efficient build .
First
What in the hell is up with that antenna placement? Are you serious?
ua-cam.com/video/K6A3JuVQ8jg/v-deo.html
Better for frame ressonance than using a tpu mount. He explained it in his 4.3 tuning guide at one point. Also you gotta chill out, he's designing these frames around having the potential to fly like whatever you want it to fly like. If you disagree with something he's doing on his build, you can build it differently because he's giving you options.
I initially thought the same thing but I gave it a shot on my V1 AOS 3.5. I noticed no issues using a vista. Obviously no good for long range but for normal flying it's fine.
More durable, lighter, lower vibration, and great signal on DJI. I'm never going back.
The build in your example is just terrible mate. Not just it looks messy and a lot of wires add weight, but even more importantly all these motor power wires forming loops on top of the flight controller and gyro will act as a huge powerful induction coil on whatever your ESC's PWM is set to.
Aaaaaaaaand no flight footage. Fantastic.
Wow, you're very demanding of CONTENT THAT'S FREE
Your weight is going to be off. None of the motors wires are soldered to anything. So you'd have to subtract for excess wire you'd cut off, and add for the weight of the solder itself.
Fully build this, instead of mocking it up, and then weigh it.
Wow, you're very demanding of CONTENT THAT'S FREE
@@CiottiFPV Its inaccurate unless he actually builds it. Do you disagree? This makes his weight totally wrong.
@@CiottiFPV And needless to say, I made no demands. Be smarter, bud.
@@CiottiFPV as far as I know he is trying to sell the frame.. I don’t know why you are so rude
@@neat_fpv I'm being rude because I'm tired of entitled assholes shitting on FREE CONTENT for no reason which leads to awesome people making said content giving up
Why do you keep using those stupid protruding camera plates? WHYYYY
Same reason that TONS of other frames use them
Love them on my FPVcycle frames. If you blow out your camera cage like this it's like $5 in carbon. With no separate cage, you need a whole new frame/bottom plate and have to rebuild. Also, less horse blinders...
@@mouseFPV I've crashed a ton. Usually just the standoffs get bent, if anything. If you "blow out" your camera cage, your camera is fucked.
@@MysteryD not in my experience. I've destroyed several carbon camera cages and my cameras are fine.
Bottom/main plates take way too much damage without them.
Ur just a hater.
I have just finished the 3.5 O3 version…I have a question for everyone regarding the camera plates…I have the standoff and shims in and the cage is very sturdy and secure, my problems is even with the top and bottom plates as tight as they can be on the standoffs my camera cage still manages to move…slightly undersized cuts? I can see visible jello vibration in my feed during throttle inputs, it clears up at zero throttle. Did I get a bad frame or do I need to just design a tpu aprt to grab and wrap to the standoff?
PSA: No one cares if the props are in view of the FPV camera. They don't want them in view of their HD footage.
PSA: Lots of people use the DJi feed and/or Runcam Hybrids for HD footage
@@CiottiFPV I'm one of those people. Plus fpv cameras are getting better and better!
I like to record the HDZero DVR.
Loads of people care about this. A lot of people don't run go pros and don't record their footage but don't want to see props when they're flying.
I use DVR for my ultralight footage. I care.