Still using the old xt60 connector with your solar inputs? Want to increase your power out put without getting new panels? Whats it all about? Keep watching...
Hmm minimally useful and just a repeat of info from elsewhere. It would have much more valuable if you had told people about the internal wiring of the connector, Tieing the new center terminal to positive or negative or not connected at all in the plug and what each voltage state will allow the Battery to do when it dects signal on the middle pin.
Hey I have been using 2 variations of the XT60 and XT60i to o-ring cables I have seen in your videos. They both work great although the XT60i has a better throughput from the battery to the EcoFlow Delta 2. I was wondering if you knew of a way to combine throughput from 2 batteries? The Delta 2 can take 500 watts of solar input, but I can only get like 150ish watts of throughput using the XT60i.
I just got a Ecoflow Delta 2 Max, and am looking for the solar components now. It's all very confusing. The max input is 500W on each of 2 inputs. Should I used 10AWG or 12AWG versions of the XT60i?
Hmm minimally useful and just a repeat of info from elsewhere. It would have much more valuable if you had told people about the internal wiring of the connector, Tieing the new center terminal to positive or negative or not connected at all in the plug and what each voltage state will allow the Battery to do when it dects signal on the middle pin.
Exactly. However this was a "report ". A quick introduction. What you are describing would be a in depth video.
Saw a video about wiring in a resistor and not needing the "i" version of the cable?
Not aware of this. Thanks
LOL the old UA-cam algorithm is really confused today.... Still gave the video a like tho :)
Hey I have been using 2 variations of the XT60 and XT60i to o-ring cables I have seen in your videos.
They both work great although the XT60i has a better throughput from the battery to the EcoFlow Delta 2.
I was wondering if you knew of a way to combine throughput from 2 batteries?
The Delta 2 can take 500 watts of solar input, but I can only get like 150ish watts of throughput using the XT60i.
See our video; Use any battery 2. It. Describes the use of a Y adapter.
Why does it matter if it’s rated at 100amps when devices like the delta pro only draw 15.9amps max?
It's just high lighting the improvement.it also provides confidence it can handle the load faster and more efficiently.
I just got a Ecoflow Delta 2 Max, and am looking for the solar components now. It's all very confusing. The max input is 500W on each of 2 inputs. Should I used 10AWG or 12AWG versions of the XT60i?
The lower the gauge wire the higher current you can handle. The cooler the cord will be. Delta max 2 can take 500w 150V per xt60i port.
whats the wattage?
For example: The XT60i DC input on the Delta Pro can take 1600W, 15A, 150V.