300HP Single Cam Ebay Budget Build D16Z6 Smoothest Dyno We've Had!
Вставка
- Опубліковано 23 бер 2021
- We put an ebay budget built d16z6 on the dyno and make 300HP no problem. D16Z6 Vitara build, with a Hondata S300, 1000cc injectors and an AEM 320LPH pump, the car still has plenty left in it. Stay tuned.
HALTECH PRODUCTS HERE ► shop.humbleperformance.com/cat...
NEW LA LENTA SHIRTS HERE ► shop.humbleperformance.com/LaL...
Support Us / Buy Parts ► shop.humbleperformance.com
Facebook ► / humbleperformance - Авто та транспорт
I’m taking all the notes 📝😂💯
Facts I wana build a single cam ek 4 door
guys breaking the bank in south africa for that block 👀
Take a shot every time Kenny says “oh boy” 😂
got alcohol poisoning am dead now
Car was re-tuned at Humble Performance a week later and put down 417whp!!!
daym!
You the owner?
@@Spudstrodamus it's my friends car we built it together in my garage
@@anthonyfletcher4853 thanks man Alex said in the video you were at 95% duty on injectors. What pump was in it? And did you change pump and injectors when it went back I'm in the process of putting my built z6 together shooting for above 500hp it has 1000cc and a 450. I'm pretty sure I'll need more injector just looking for what you guys had in it.
What rods??
300 hp on a single slammer, do you know how many forum's say it's impossible lol, I love I've got a f series motor lots of fun, this video inspired me
You just need forged pistons and connecting rods, a decent turbo kit, and some new injectors.
@@vtec_c1loop844 you don't need forged pistons, plenty of d series making 500+ on Vitara cast pistons :). You also need quite a few other things you've not listed, such as an uprated fuel pump and a tuning solution to name a couple :)
On f series 300hp is 100% capable they are a bigger motor than d series, plenty of people have made 300hp with just headstuds
Z6s were doing 300 20 years ago lol, all day.
Man I remember a million years ago taking the air box lid off my boy's mom's EX coupe and really hearing VTEC for the first time..
That was it, been a Honda guy ever since... I do love a big ol V8 though too
#Carguysarecarguys
Imagine a V8 with Vtec i don’t know the good and bad if there’s ever a monstrosity of a setup that be ?
@@kaybevang536there are definitely v8s with variable valve timing :) Toyota's 1uz for instance, 4.0 quad overhead cam v8 and some models had vvt-i which is Toyotas version of vtec but the non vvti engines are actually more sought after. Some big horsepower Honda builds actually eliminate vtec as well.
Same here ! I own two v8s and just bought a single cam Honda I love em all and can't ever stay away from 4 cylinders
Finally another sohc these little monsters started it all
Actually the ZC kinda started Honda off on their 4 cylinder performance route, SOHC D/F series stuff really came about because it’s so cheap and plentiful. Never really widely used for motor sports though.
@@kennethpowers8995 back in the early 90's before the ZC and then B series swaps were happening, the 88-91 Civic and CRX SI's were rocking the D16A6 and surprising people left and right due to their power to weight ratios. ZC's were definitely a huge upgrade, but I feel the A6 got it started. Just my opinion though.
I still remember you guys squeezed out 500plus hp out of the eBay gt35 🔥
This is all I've ever wanted was a 300hp daily
for real ...
don't think I'm asking for much, maybe participate in autocross one day then daily drive the next ... nothing that a modern day turner car would be expected to do ... ( with air conditioning )
I’m on the same page a 300hp daily is what I want to experience while keeping A/C and reliability I’m not even dreaming in the 500s I thinks it’s obtainable I just need to do plenty of research.
💕👏🏽 all love for the turbo single cams
Nice numbers for a single jingle! I used to have a Tahitian green eg coupe back in the day with a D16z6 and ex model.Man I miss that car.
Finally a new vid!! Thanks humble!!
Where's our single cam budget turbo kit?
Good some single cam content. If there was going to be some with my d16y8 turbo eg sedan.
I'm inspired by this one ... the force is strong 💪 ... taking notes ...
Need more of these
Respectfully built 💯💯💯 that's some #humbleperformance 🔥🔥
all the way from South Africa
Got a bad guys stage 4 cam vitara build in the works, 450 fuel pump, 1000cc injectors hoping to make some good power on pump gas
I literally just ordered a PRB-A01 oil pump for $120 on EBay 2 days ago lol. The Type R/Type S pumps are definitely out there.
are yall doing the budget build for d series ?
Y'all need to do more sohc fr fr
CEO of “oh boy” 😂
Making that juice!
Clean 🤝
Real nice but no what happens to the 2 step great job 👏 single jingle
We here!
Damn how u guys get ur blocks that clean
I have a similar build... I just ordered a bigger 6062 turbo and a bisimoto 2.4 cam. My goal is 400 wheel on e85.
Can’t even get bisi cams new anymore
It needs stiffer motor mounts, nice runs though
thought it was gonna jump out for a sec!
Friend of the guy who owns that build man is it fast
Can you guys do a compression on full mandrel bent to up pipe on the same map
Is that yellow CRX fast or what????? Are you going to do a video on that build, DANG.....
Great content as usual guys. Can anything be done with the F20b6 or K20a4 engines? these are cheap here in the uk and easier to get hold of then K20,s h22,s ect. Cheers
I've got an f20 that's currently being boosted and also stroked to 2.2
Do you happen to remember what engine harness was used for this? I have a z6 and trying to put in 99 civic
Can you post the videos of the turbo K20 2000 civic you got rid of in may?
Man i wish these engines were still cheap 😢
Bro hagan videos en español tambien... saludos desde Venezuela bro..
You need more videos on d series turbo
We have a good one coming soon !
So, did this guy run a block guard, in the d16? I ordered a GE guard for my a6z6 mini me.. Css would be like 1500 canadian.. So not feasable.. GE guard good?
If I hear Puerto Ricans and we around Mazdas.. toyotas or Hondas I know its gonna be a good time
How reliable will that be?
Who did that block go to in South Africa? Was it to CAPETOWN?
Can someone explain to me what boost is ima noob but trying to learn all this stuff. Like how is it installed and what does the pounds of boost mean? If someone could help me out it would help
How much does a tune like this usually Cost?
Wow! Build me a SOHC too🙏🏽. Never thought a sohc could make that much power... Impressed Adrian from Cape Town South Africa
I am building another one just like it it will be for sale
could i pull something similar off with a D16V1 ?
Internals stock ?
Is this stock top end?
I wanna see pump gas pulls. No e85
What turbo is on the car?
Cape town
How much will it cost me to have my z6 tune to 200hp with ebay kits?
Cost for building something like this?
Sohc ftw
Where can I find the parts list
@humbleperformance I'm trying to build a d16z6 and trying to make it 300hp and have it last 200,000 miles. I want it to last. How can ya help me with this build?
Stock trans?
woooah no intro music
I need a complete engine block with orchards bearing 300_400 hp
I really wanna built a d16 for some reason .. Im in process of b18lsv
The D-series definitely takes it back to what really got the Honda stuff rolling IMO
Please more vídeos boys
What do you recommend i do to my d16y8 to get it to hit 330-375(maybe 400) whp, I will be doing e85, mainly Looking for help on whether I should upgrade clutch, valve springs, camshaft, connecting rods, pistons, Thanks
you gonna need all that upgraded lmao
An do billet oil pump gear the y8 has weak gear In the pump
Sheesh! Don't tempt me. 😂
So I have a question, I have a d16y7 sohc.. and I blew it up so now I need the rebuild the bottom end, was just wondering what the best piston and rod set was considering I’m a mustang guy and never dabbled in the Honda world before😬
Max peeding rod no notch rods n 75mm vitara pistons, yes from a Suzuki you put em in backwards
@@alexw9498 thank you🙌
Would you really need 1000cc injectors on a z6 to hit 300 with a lower level turbo tho.... I would think 500 and a good fuel pump would be plenty good....
Btw I have no idea what I’m talking about, just speculation and tryin to learn
He's running e85 it uses alot more injector than pump gas
Salúdos team humble performance me pusierón a soñar despierto y a llorar me recueda mucho a mi single cam turbo ,buen, trabajo le queso bueno de verdad con menos ponis me curraba yo a 10 lbs bone 🦴 stock corriendo 11.9 a 113 millas y despues a 117 millas costante.esi fue 🦴 stock.
Dammm buenos números, que combinación tenías es que estoy haciendo una hatchback 93 turbo a ver si la pongo saludable ✍️
@@kennymercado5768 hola no tenia solo head studs cosmetic gasket injections 550 cc rc y emuza turbo todo de ebay motor virgEn y cabeza virgen ese carro era el dolor de cabeza de muchos y la fuel pump 240 walboro.
@@kennymercado5768 lo puedes check and you tube....flaco tech tuned speed quest tienen various videos de mi carro allí es un coupe rojo
@@juanvega7649 gracias bro ! Vamos a ver si la ponemos a gozar!
@@kennymercado5768 dale , dale gracías
turbo aint doin nuthing for the level of noise. sounds na damn loud
I wonder what the total cost would be for these upgrades?
I know speedfactory rods are around $400 and vitara pistons are $150ish, $100 for a fuel pump, prolly $200 for injectors and maybe $1000 for the turbo kit
Anybody got a modded 2.4 accord where do you start
Oh Boy...
🙌🙌🙌 #savethesohc #getbarbas10ksubs
Eso fue con ebay turbo emusa
95% duty cycle on fuel with 1000cc injectors and only 300HP? Whats the holdback there? Fuel pressure or pump? or both?
oh NM i just realized e85, more fuel needed so higher duty cycle % numbers, im like wtf I got a d16 with 1000cc injectors and no where near 95% duty cycle lol
Yea I had to upgrade my wireing from the fuel pump and I had my boosted solenoid plumed wrong but i took it back and made 420hp after I changed that stuff
@@8301jarred you have an Instagram? I'm building something similar I'd like to ask you some questions
I need a front bumper like this. Can anyone send me a link from eBay?
Anyone know the specs ?
Save the sohc
Does anyone have a spare y8 head?
Oem or Aftermarket rods ?
If those are oem rods, it'll make that power a few times, lol. Then it's game over.
They are SpeedFactory no notch rods
I'd like to know what rods as well. I'm doing the same setup for the most part, but using a 58/55 turbo.
i used eagle on my vitaras
They are SpeedFactory no notch rods
Should easily be able to outrun a new Civic Type R in a straight line. More power, less weight, fraction of the cost.
I made 212 in my stock z6 with ebay turbokit and raced a type r with bolt on and he beat me by only 2 cars at 300 it should walk a type r
The new civic type r is a tank and only making 300hp at the crank. Not fast. Any turbo coupe or hatchback making 230hp or more at the wheels will murder a type r with ease🤘
🇿🇦 🇿🇦 🇿🇦
Rods?
SpeedFactory racing "no notch" long rods
D budget turbo kit please 😩😩
#singlecammatter
WHERE'S THE SINGLE CAM CONTENT???👀👀👀👀
Anyone out there in Honda land mess with the L-series? My daily '08 Fit has an L15a1(i think?) And while I tell myself its the daily, leave it alone.. I can't help but wonder
from what I hear, leave it alone. weak pistons and no real aftermarket... imo
Isn't 1000 cc an overkill? wouldn't be to rich the mix using all that ccs?, integra type r is 1.8 litters but injectors are 300 cc
No, if 1000cc is too much you just drop the duty cycle. But this one is apparently running 95% duty cycle so using almost all of the 1000cc. That's because it's running on E85. On gaslone it could probably use a 700cc or something. 300cc would be way too small on a high horsepower turbo car.
Where’s that intro ! 😡
95% duty on 1000ccs!?!
Find me original side lens for 89 civic hatchback si new for less than $500
I'd spinner round,,,,
Why does everyone put a breather filter on the valve cover you’re supposed to put an oil catch can you’re losing the vacuum in your engine
This car has a catch can...
The D16Z6 & The A6 are the underdogs, the compression is so low you can turn the boost up and up and up and up
save the single cam
What about all this EPA regulations will you’s be still doing this
That turbo too big for 300hp 😂
we went back and made 400
Damn 95% duty cycle with 1000cc injectors on e85 = 305whp I was hoping for more 🤦🏽♂️
@DaOnE51T car made 417whp on the exact same setup after upgrading the fuel pump wiring
He spelt it vtech..... 🤦♂️
U spelled...
@@Shuffleboy428 It’s not wrong. It’s just not necessarily American text.
Show the actual graph man, couldnt even tell what RPM you are getting that power at, cant see where it hits boost even, what a joke...
Great! like that ! i do on my youtube chanel 295 HP and 377 tq with an D15Z6 at 18 psi ! CIVIC DAV4WS Slip-peut on dyno if you interesting . congratulation from France !