How to wire a Solar Controller | How to wire a Eco Worthy solar controller
Вставка
- Опубліковано 17 лип 2021
- In this video I'll show you how to wire a #solarpower Controller. If you have any questions or comments please feel free to ask below. Thanks for watching!
Inline Screw Type Fuses:
======================
Inline Screw Type 5x20mm AGC Fuse Holder 16 Awg Wire 10 Pieces + Quick Fast-Blow Glass Tube
Fuse 5 x 20 mm Assorted Kit (Pack of 100)
www.amazon.ca/gp/product/B072...
ECO-WORTHY 20A Solar Charger Controller PWM for Solar Panel Battery Intelligent Regulator with USB Port 12V/24V Auto Paremeter Adjustable LCD Display
=======================
www.amazon.ca/ECO-WORTHY-Cont...
I am not liable for damages caused from this video. Always make sure the power is disconnected before servicing or making changes. Thank you for watching.
(Recorded in 2020)
#solarpower #electronics #renewableenergy - Навчання та стиль
Great hand coordination there bud and concentration. You did a great job on explaining this assembles of solar and it's very efficient. I will come back to this video again once I need to put one together. Thank you sharing your great ideas. Keep safe out there.
This is very helpful ideas. Thanks my friend for this amazing video.
Great video. What amp fuse did you use for the battery?
Fab video, most helpful! Can I assume if the solar panel is showing on the screen then all is well? Is there a way to see how much power is coming in on the charge controller screen or do I have to have a gadget like yours?
Press the red button once will show you how many amps going to battery, press twice will show battery output, press three times will show temperature of controller 👍🏻🇬🇧
great tutorial, thanks for the help
What can you hook up to the right side auxiliary?
So if you have a problem that blows the fuse then wont the solar panel keep putting out power and end up burning up the controller ?
What size fuse did you use? Is 10amps enough?
For a 20 amp battery what size fuse should I use?
how do you program it?
I have the same system but can't get mine to work. I have 15 v coming from the panel on the roof but when I contacted my lines from the panel to my charger control I get Les than 1v can you help.
Congrats for the video! I have a basic question on the controller function! Considering your setup, the USB Energy comes from the battery or directly from the solar panel?...and of a connect a load using the other two connections, again, the Energy arrives from the panel or from the battery? ..thanks
The power comes directly from the battery. The solar panels charge the battery, but the 'devices' do not run directly from solar power. The solar panels charge the battery, and the power for the devices come from the battery itself.
How efficient is that 10ah battery?
I have a 200w system, yesterday in direct sun it was pushing about 10.5 amp, today, .1
Any ideas why it would do that?
I'm not 100% sure of your setup, but it could be a faulty solar charge controller.
Do you have to set the controller after wiring or are settings pre programmed to prevent frying the battery?
I’m a complete newbie(at 82) to these modern systems so please forgive my ignorance.
I subbed hi