Wow! That one saved me from too much stress since I just noticed a leak out from front right seal and came to see how it is suppose to be fixed. Thanks!
The ring s the final boss😜😱😏two very small flathead screwdrivers .., about 2cm away from the gap on the ring insert first screwdriver & lever out for second screwdriver to slot in next to it , moved it round about 2cm again and then it should just pop out 👍🏼👏🏼👏🏼👏🏼💪🏼 but it's not that easy 🙃
Thats gonna leak again, the lip will tear when putting the stanchion in, u need to put the stanchion in first then the seal with plastic bag to protect seal lip when putting on the chrome stanchion
Wow! That one saved me from too much stress since I just noticed a leak out from front right seal and came to see how it is suppose to be fixed. Thanks!
Mad save, right fork started leaking and was about to bring it to the shop. Probably could do this myself ty
Its a straight forward job as well, you will be surprised, only tricky bit was taking the stubborn ring out, good luck with it👍
The ring s the final boss😜😱😏two very small flathead screwdrivers .., about 2cm away from the gap on the ring insert first screwdriver & lever out for second screwdriver to slot in next to it , moved it round about 2cm again and then it should just pop out 👍🏼👏🏼👏🏼👏🏼💪🏼 but it's not that easy 🙃
The ring is the exception for reasonable rage quit for this job, also a 3rd hand is helpful 😂
Thats gonna leak again, the lip will tear when putting the stanchion in, u need to put the stanchion in first then the seal with plastic bag to protect seal lip when putting on the chrome stanchion
Aprlia rs 125, my bike with a single spring only on one side is it right?
Thank you
Yes. one side spring other side damping
Whatever happened to this build? Was looking forward to seeing that complete....
Hello , are the same steps for sr50 ?
This is stif or soft suspension
Nice
Kitne ka h oil seal aur kha se le skte h???
why do you all the dirt in ?
Thanks!
Is this the same procedure on aprilia RS250 Marzocchi forks?
same..
oil seal fork size and dust seal size?
never mine alreaady remove mine.. oilseal saiz is 40 x 52 x 10... dust seal is 40 x 52.5 x 4.6...
what size wrench did you use ?
30mm
Big
Why spoil the vid with music