Yamaha Grizzly Coolant Flush | Yamaha YFM700 | Partzilla.com
Вставка
- Опубліковано 22 лип 2024
- Buy the parts and supplies for your Yamaha Grizzly YFM700 coolant change: bit.ly/yfm700-grizzly-coolant-...
This started off as just a coolant change on our Yamaha Grizzly 700, but once we cracked open the cooling system, we knew there was a little more work to do. The fluid was so dirty, we knew it was time to clean the system, so we’ll show you how to flush the radiator on your Yamaha Grizzly. For this, you’ll need to get a good radiator flush at your auto parts store, but make sure it is compatible with your aluminum radiator.
First, we’ll show you how to get the footwell and the plastics out of the way to access all of the parts of the cooling system. Then, we’ll show you how to drain the radiator fluid so you can start flushing the system. After a few runs using the flush and some water, we’ll show you how to fill the system and set the level using our Yamacool pre-diluted antifreeze.
Check out the radiator diagram: www.partzilla.com/catalog/yam...
Here’s the water pump diagram: www.partzilla.com/catalog/yam...
How often should you change the coolant on your Yamaha ATV? Yamaha recommends every two years. After that, the fluid can turn acidic and will start to corrode the inside of your cooling system.
Looking for more Yamaha Grizzly 700 routine maintenance? Here’s how to change the oil: • How to Change the Oil ...
Read how to do this job step-by-step: www.partzilla.com/blog/yamaha...
VIDEO HIGHLIGHTS:
Removing footwell and plastic - 1:20
Draining radiator fluid - 1:30
Flushing the radiator - 2:20
Bleeding the cooling system - 2:30
Refilling the radiator - 4:00
Setting the reservoir level - 5:30
Find thousands of Yamaha ATV parts here: www.partzilla.com/catalog/yam...
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2007 Yamaha YFM700 Grizzly, but you may have similar steps for your Yamaha ATV. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT:
YFM700 front brake pad change::
• How to Change the Fron...
Yamaha Grizzly gear drive service:
• Yamaha Grizzly 700 Dif... - Авто та транспорт
These videos by John are always the best. Best service tutorials for the Grizz on UA-cam, absolutely.
Highly useful, Quality videos professionally done without wasted gunge music and character antics. Huge thanks!
Just redid my coolant last night came out like johns dark dark red with sand in it really bad...just bought the machine from someone didn’t even want to run it hard until all fluids changed...great video
Best videos on my Yamaha, ever! Thank you.
Awesome video ! Just picked up one of these used and fluid came out brown just like this
Thanks for the vids, John!
I like the Honda Trail 90 behind you.
Pity your in the US John. Thank for your videos tho man, they help me keep training my 55 sled dogs in Lapland. Xxx
I have a 2002 grizzly 660 with 2194 miles on it that I bought new still has the original tires on it they are about half tread and I’ve never changed the antifreeze
Do I use the some coolant for my 05 grizzly 660 and is it the same steps
Very informative thank you
What if the thermostat won't bleed? I have the screw out, the system topped off, but nothing comes out the bleeder valve!
coolant is always so neglected, it takes a decent amount of time for it to cause an issue, then when it does no one ever thinks its from lack of maintenance
I drained mine flushed it with 4 gallons of Distilled water. Then refilled with Zerex 50/50 blue coolant.
Would these steps work on a 2019 kodiak 700
is it the same procedure for a 2006 grizzly 660, and will the mach bleed itself without cracking the bleed screws on the water pump and thermostate, at this time i am not sure i even have those bleed screws
what hose do you kned for that oiverflow tank
What year grizzly are all you part videos good for I have a 2011 700 se will all the video work for my year
Is there one of these for Polaris sportsman s?
Super helpful
Did you often overheat before changing it?
Could you do a yfz450 coolant change
Good video. Thx 👍
Good video but read your owners manual for exact bleeding procedure & coolant capacity. The link has you buying only one qt. of coolant when almost 2.5 qts. is needed. 2008 700 Grizzly
I love partzilla
Thanks a lot
we are gsxr video waiting :)
HI John. Fantastic video on the Grizzly. Im over in England and have a Yamaha Grizzly 550 2011 model. Not many good quad bike repair places over hear. I am going to change my coolant and its looking good, so hopefully no need to flush. One question though, will I need to bleed the cyclinder head? Didnt see you do it on your 700cc one in the video but my handbook suggests I might. Trust your advice. Regards Adam
Nice video. What does it mean when the coolant level in the rad doesn’t drop after you re-fill and run the bike to temperature? I just changed the coolant on my Suzuki Vinson 500 and after topping off the rad and warming the engine with the cap off, the level does not drop.
Thanks John. Old video I know, but will the steps be the same for a 700 Rhino?
My exact question - my Rhino 700 is overdue for coolant change service
Hey can you do a video '08 honda cbr600rr spark plug change please I really need help and I alwayd watch your videos
We'll add it to the list!
do you really need to got whit yamaha coolant i feel bad now
You don't have to.
Thanks same question.
How much coolant you need? Would any good automotive coolant work? Example GM's Dexcool - it is made for aluminum engines. thanks
You can use automotive coolant. 2.1qts on the Grizzly.
Partzilla i have some Left over Honda Genuine Type 2 Engine coolant will that be ok for my Kodiak.
@@nighthawkj30A4 yes, that's what I am using