Dude please film more help get your money up get that S15 rolling love the channel I would legit watch if you posted 11 minutes of you walking around the S15 whatever helps get you that Revenue
this is the start of the build, been waiting ages for this video, cant wait for the engine install and coil over install vids!! this channel about to blow up! lets fuckin go!
Don't get 300ZX brakes skip right past them and get Akebono brakes with 350Z rotors and then you can purchase the caliper adapter kit that bolts Akebono calipers up just like you would the 300ZX calipers. You'll be very thankful you did this it allows you to run a larger-diameter rotor which is better for cooling and also the larger caliber will fit better under more Wheels since it's further away from the Hub unlike the 300ZX brakes which are huge but always end up sitting super close to the Hub which causes wheel fitment issues with a lot of Wheels. Just replaced my 300ZX calipers with Akebono calipers. you can get them off eBay remanufactured super f****** cheap I paid 550 for all four front and rear brand new seals and Boots definitely worth it
Yo man Im that shy kid with the red s13 with the garage sideways banner and a black hood. I love s15's and would love to get a ride along on the event next sunday if I could.
This man has more projects going on than I did in school but these ones are actually full like when I say fun I mean like fun fun stuff not mandated shit
Run it just like that looks sick, no tires, would drift crazy easy!!! And reverse entry's. Ooooo and the light show would be magnificent,😆😆😂 looks good dude cant wait for some awesome drifting
I swear those are the same wheels Randy's running...anyway, hope you get the car up and running soon. I'm doing a Blobeye WRX stance and power build because why not obviously and shit it's finally time I get to work on my car lmao.
Okay my guys and gals, Im about to turn 19 and im gonna start saving up for my first project car, (dont know id i wanna Drift it, Track it, or Drag yet, possibly both) what would you all suggest other than a s14 (nothing aginst them just personal not my favorite) id like something reasonable affordable but i do expect to dumb a lot of money into it cuz i know its not a cheap hobby, just cant decide what car to start with and what would help me learn the easiest and be the easiest to work on. Just trying to get started young so the pricest and rarities of these cars dont become to high. If you wouldnt mind please drop some opinions and help a fellow learning enthusiast out.
Hey dude, nice videos. Subscribed! I'm wondering how much did you pay for the s15 and what company imported. Also, it would not be cheaper already ordering a s15 with the turbo motor already? Thanks!
Didn’t seem wide enough to not want to fit in the fender well😂😂😂😂 it can fit perfectly fine it just needs some overfenders. Hehehe see I just solved that problem well unless this man don’t want fender flares than I got nothing 😂
The amount of dumb kids saying to run the wheels like that or just “camber it” or just roll the fenders is unbelievable. Some people’s kids man I tell ya...🤦♂️
Dude please film more help get your money up get that S15 rolling love the channel I would legit watch if you posted 11 minutes of you walking around the S15 whatever helps get you that Revenue
Ghost Face lmao I agree with this guy
Ghost Face thanks ❤️❤️
Hahaha I watched this just to watch someone else build a masterpiece that I get to be a part of I kind of feel included that’s the magic of UA-cam 😂😂
this is the start of the build, been waiting ages for this video, cant wait for the engine install and coil over install vids!! this channel about to blow up! lets fuckin go!
Zac Hardman she has coils hsha
WHEELS CAN NEVER BE “TOO WIDE” MAKE THEM FIT
Andrew Crumbaugh that’s what I thought too
Don't get 300ZX brakes skip right past them and get Akebono brakes with 350Z rotors and then you can purchase the caliper adapter kit that bolts Akebono calipers up just like you would the 300ZX calipers. You'll be very thankful you did this it allows you to run a larger-diameter rotor which is better for cooling and also the larger caliber will fit better under more Wheels since it's further away from the Hub unlike the 300ZX brakes which are huge but always end up sitting super close to the Hub which causes wheel fitment issues with a lot of Wheels. Just replaced my 300ZX calipers with Akebono calipers. you can get them off eBay remanufactured super f****** cheap I paid 550 for all four front and rear brand new seals and Boots definitely worth it
preprodigy I already have z brakes
Yo man Im that shy kid with the red s13 with the garage sideways banner and a black hood. I love s15's and would love to get a ride along on the event next sunday if I could.
n1f1sniper definitely!!
dude get back on the videos man please
Dammit Quan!!! Quit covering the mic lol
Love Quans car, please film more of that thing.
Been awhile miss your channel dude keep putting in work cars looking good 😍 haha damn heart eyes
Put on the overfenders bruh
Jan Soto they take away from the body lines of the car
The S15 is about to be mean as fuck ❤️
Car looks bad ass with those blitz!!
I love your build ....I love that you actually have two badass cars in the garage.quans and of course yours.
This man has more projects going on than I did in school but these ones are actually full like when I say fun I mean like fun fun stuff not mandated shit
Thought it was jacked up in the thumbnail 😂😂😂
Run it just like that looks sick, no tires, would drift crazy easy!!! And reverse entry's. Ooooo and the light show would be magnificent,😆😆😂 looks good dude cant wait for some awesome drifting
Bruh can u put the front wheels on the back and just rebuild the back for the front
Jerry Wooton depends, offset could be different & interfere with breaks
To big
so pleased to see you back bro!
Cts-v brakes > z32 brakes.
You gonna need the trim piece between the tail lights and the bumper to those chaser lights.
I swear those are the same wheels Randy's running...anyway, hope you get the car up and running soon. I'm doing a Blobeye WRX stance and power build because why not obviously and shit it's finally time I get to work on my car lmao.
Yes same as randy blitz03 its a common wheel
S15 looking good!
how do you have a s15 state side, are you going to drive it on the street or just tracks?
sick af man just do the fenders say fuck it G
Okay my guys and gals, Im about to turn 19 and im gonna start saving up for my first project car, (dont know id i wanna Drift it, Track it, or Drag yet, possibly both) what would you all suggest other than a s14 (nothing aginst them just personal not my favorite) id like something reasonable affordable but i do expect to dumb a lot of money into it cuz i know its not a cheap hobby, just cant decide what car to start with and what would help me learn the easiest and be the easiest to work on. Just trying to get started young so the pricest and rarities of these cars dont become to high. If you wouldnt mind please drop some opinions and help a fellow learning enthusiast out.
Damn you know it's been sitting when you have corrosion on the rust.🤣
Aye a new video, car looks dope.
Nice dude. SR life. Love it. I got the TT Rollin. Twin Turbskies. I'll bring it over soon
Ready for the next video with more s15 goodness💕
Hey dude, nice videos. Subscribed! I'm wondering how much did you pay for the s15 and what company imported. Also, it would not be cheaper already ordering a s15 with the turbo motor already? Thanks!
When are you getting a loud exhaust
Hopefully you can get some more Ts and windbreakers soon.
From what year is that sr?
By “spirit” do you mean a spirit.jp events in Richmond, VA?
he did say 'spirit on the 19th'
Shredit RVA yessir !
@@garagesideways2753 Ayyye we look forward to seeing ya slaying out there!
Didn’t seem wide enough to not want to fit in the fender well😂😂😂😂 it can fit perfectly fine it just needs some overfenders. Hehehe see I just solved that problem well unless this man don’t want fender flares than I got nothing 😂
If it don’t fit well only one thing I can do make it fit😂😂😂😂
I would say like if the rims are rubbing than it is too wide but what is there to rub on the wheel pokes out too much😂😂😂😂
Do a Q&A on the s14
WoW!!!!
What song is that in the intro?
Love you bro, please keep up the work
What kind of car is Juan's car
What happened to those overs you had?
He doesn't want to cut his car up. He still has them.
Ilikeboost sorry must have missed that was watching without sound
How much horse power will the s15 have
Hey girlyyy boiiii paint it pink
Camber gang that shit 🥵🥵🥵🔥🔥🔥🔥😈😈😈 kill the gang bro 💯💯❤️
Needs more power
Booooost!!!!
Great video, what happened whith the 300zx?
You mean the one they sold months ago...
zack has not sold his car@@bananaslamma69
Where u gone u never do any drifting or video's much
Just go 326 style
Dude please make them blitz work with those specs
LUCAS FILIPS this is such a stupid comment lol. Sorry Pal they don’t fucking fit
you’re an idiot
FuckK
my scrotum smells like socks lololol
Runit like that
Update the intro bro
Df happened with your hair bruh lol what stage of life are you going through. I also miss you swinging the s14 on the street
Lol everyone told
You don’t go wide and make her ugly like your last one
So inconsistent with the updloads channe is slowly dying in my opinion
How much would you charge me for you to sweep that shop floor.
So when you been drinking you say wash and not worsh? 😁😊
boostedKTM I’ve been trying to correct my self lol
The amount of dumb kids saying to run the wheels like that or just “camber it” or just roll the fenders is unbelievable. Some people’s kids man I tell ya...🤦♂️
Leave it as Is
why dont you do a roll and light pull on the fenders?
im Schwaggy because they need way more the a roll and light pull LOL fucking people
Where is the s14
Stripped shell sitting on the side of the garage..
Looks slow oh wait it is slow 😂
The itro is so fucking annoying good videos but that intro i always have to skip it
RB or JZ why SR
Can you please not ruin this car
Yeeeeerrrrrr
here b4 500 views
Just put it on rota grids for a while