FLEX Table Saws In-Depth Overview : How Many Feet Ripped Per Battery Charge?
Вставка
- Опубліковано 20 гру 2023
- New Flex table saws have arrived and I have the perfect project to put them both to the test! Were going to see how many 2x4x8s can be ripped on a single 12.0 battery charge. Plus take a deep dive into each saw up close and personal, the details can make or break a tool.
SIDE NOTE #1 - THE SAWS ARE BOTH DUAL POWER! SOMETHING I FORGOT TO MENTION IN THE VIDEO. THEY WILL RUN OFF AC OR DC POWER! FLEX DID NOT SEND OUT THE AC ADAPTER WITH THE SAWS, THE AC ADAPTER WILL NEED TO BE PURCHASED SEPARATELY ONCE THESE SAWS ARE RELEASED FROM WHAT I UNDERSTAND.
SIDE NOTE #2 - YES BOTH SAWS LOOK LIKE THEY HAVE PLENTY OF ROOM TO RECEIVE A DADO STACK! HOW BIG? IM NOT SURE. THE 10" WILL DEFINITELY ACCOMMODATE A LARGER STACK
SIDE NOTE # 3 - ONLY ONE WRENCH IS REQUIRED TO CHANGE THE BLADE! THERE IS A BLADE LOCK MECHANISM NEXT TO THE BLADE THAT LOCKS IT INTO PLACE, VERY CONVENIENT!
Instagram: / miillersconstruction
@flexpowertoolsnorthamerica728 #flextools #tablesaw #cordlesstablesaw #tools #powertools #flexpowertools #indepth #upclose #newtools #batterypowered #carpentertools #carpentrytools #carpenter #contractor #construction #remodeling #toolreview #toolreviews - Навчання та стиль
I found out that Flex in fact does make an adapter that one is able to use a battery and an AC corded plug. This is surely the best of both worlds. I am gonna buy the 10 inch unit..
I watched another videos on these saws. Your is the best touching all practical/real world use points. Thanks again for the test and video!
Thank you! Yeah I'm not in a studio, I'm in the real world here in my channel. I like to use my tools on actual job sites. Appreciate you checking out the video man.
Great video!! I love being a part of the Flex family. Wish Flex would send me some things with how much I buy and talk about them on the jobsite 😂
Thanks man! That's awesome that your into the flex lineup. We have been running flex almost exclusively since the launch. Never had an issue to this day. The only tools we use that aren't flex are the ones they don't make yet.
@@miillersconstruction same here brother, no complaints and excited to see what they come out with next
loved the hybrid function on my Metabo Hpt 10 inch table saw. this looks like a nice compact saw.
I'm looking forward to having that option on these two saws as well. Wish they had sent out the AC adapters, I wouldn't have forgot to mention that they have that ability. Just so much to cover it seems. Both saws I've been very impressed with.
This was awesome
Hey thanks for checking out the video!
Will this saw cut hard woods? Can this use high count blades and cut hard wood? Does this saw stay accurate after fine adjustment?
Thank you for testing both saws super-early. I like your 'realistic' way of testing with the cuts. Quick Q - could you let me know the table sizes for both? As an intermediate hobbyist woodworker, I've been looking for a decent portable & cordless options and the 10" Flex may be the one for me. But table top looks a bit smaller than my expectation.
Hey thanks for checking out the video! Absolutely. Great question. The exact measurement of the 10-in table saw top only is 27⅝" wide 22" deep. Full depth from the front of the fence adjustment handle to the rear most part of the saw is approximately 27". Total height of the saw without the fence installed is approximately 13¾" tall. Just let me know if there's anything else you would like to know.
@@miillersconstructionWow... Thanks for answering my question super-swiftly! It's about 1&1/8" wider than DeWalt 7491, so it really is a full size job site saw. Can't afford Sawstop yet, and anyway I don't like that they wouldn't release the patent. A good size table top gets me a bit safer than smaller for making it compact. Now I can just wait for it to hit the market. Thank you, again & Happy Holidays!
@@jungyoonchoi9146 Your very welcome! Glad it helps! I get into more details on my instagram stories typically as well if you want to check that out.
does it take dado head?
Yep! The 10" will accept a much larger dado stack.
Does this saw has an AC power option/option with similar features like the new chop saw.
Yes. Both of the table saws will be able to function on the AC power adapter or DC battery power.
I love me some Milwaukee tools. Have the 8 1/4 Milwaukee table saw cause I work in a small space.
That being said....Bravo to flex with that flip up side table....I absolutely love it!
We need constant little innovations....it pushes all the good companies forward in competition.
Flex strikes me as a milwaukee competitor on the Lowes side, obviously they dont have the years of consistency....but they seem to have started out as well as a company can expect....keep it up!
As a note, I have tro say I really dislike the Cut sense feature...I can see it being nothing but a frustration and not adding anything enough of worth to be there.
That being said i still respect the fact that the team is trying different things etc..just one thing I dont worry about is battery charge, always have a spare so it just seems uneeded imo.
Interesting viewpoint. Thus far I am really enjoying the Cut Sense personally. But thats the nice thing about Flex. They offer it, but you DONT HAVE to use it! I agree, competition amongst companies is just going to set the bar higher for everyone.
Question will the 10" accept dado stack?
Yes 100%. I think both will. The 10" has tons of extra room on the spindle. Great question Ricky. Keep them coming.
Just waiting on these to hit the shelves so I can buy the 10inch. Really like that battery or corded option Flex has here.
Yeah were the same way. We like that its got the ability to run for extended periods off an extension cord. Both the 10" and the 8 1/4" are really nice. But I prefer the 10" as well.
This was my first time knowing these existed. It’s a bit of a small detail but how tight are the tolerances on the miter gauge? We have a rigid table saw (hate the thing but it works) and the miter gauge is really sloppy when you push material through with it.
It feels pretty snug and quality to me. But you would have to be the judge of that. I have used the rigid and felt it was extremely sloppy as well! Great question. Wish I had thought to have shown that in the video. It was just so hard for me to remember everything.
I just knew you were going to put these saws through the riggers. For sure, I know I'll be getting the 10 inch no reason for me to have a smaller saw. I'll be getting the power adapter as well just in case. I have many batteries to support both miter saw and table saw as well as couple of 500 watt Super chargers just for this purpose.
Nice review, thanks. I thought at least one of these two, had the possibility to be powered also by mains AC voltage when battery was not needed because of availability of regular power source. Is that true? Happy Holidays.
Both can be powered by AC or DC. They did not send out the AC adapter so I completely forgot to mention it 🤦.
what battery was used in this video, i have two different 24v right now at home
I used the 12.0 battery to make all the rips. But I can tell you that even the 5.0 batteries work quite well.
I was curious when the battery went into thermal overload protection, how many bars were left on the battery?
Because thermal overload is just to allow the battery to cool down, it doesn’t deplete the battery (at least for Milwaukee).
Plus what about the cord adaptor for this, I didn’t hear you mention anything about the saws being able to be plugged in.
The battery was blinking and completely dead as well. I personally never run my batteries to that point regardless. If they get to 1 bar, I'm stopping immediately and throwing it on the charger. But that battery wasn't just thermaled, no chance you're getting another rip with it even cooled down. Yes I forgot to mention the fact that it will be available to use with an AC adapter which is coming soon. I put that information in the description. I was so focused on covering as much as I could, it's difficult to remember everything.
Does the blade change require two wrenches, or does it lock with a lever and only require a single wrench? Also, can it take a dado stack (if so, how big)? Thanks!
Great question. Both saws look like they will accept a Dado stack, how big, I'm not sure. The 10" has a slightly longer shaft than the 8 1/4" so it will accept a larger stack. Only one wrench is required to remove the blade! It has a blade lock feature that you simply pull up and it locks the blade into place. Very simple and very cool. Also something Im just realizing I forgot to mention in the video that's a big deal, the saw IS DUAL POWER!!! Yes that's right, it will run off AC or DC power. They did not send me the AC Adapter, it will have to be purchased separately anyway when the tool is released. Great questions!
Thanks for the quick response! Now I'm curious - since the adapter is not built-in - if the AC adapter will be able to be used in all the other tools, too (like maybe an eventual miter saw). I guess we'll find out soon!
@@DeletedUser12345 I believe you are right on track with this!
When does this officially come out?
I'm curious to know if these new Flex saws come with a built in blade lock button to replace the blades bc my dewalt table saw doesn't have it. I have to use two wrenches to replace my blades.
They absolutely do. And it's so much nicer than using two wrenches. Both saws have a little lever next to the blade you can pull up and lock the blade into place for easy and fast blade changes.
@@miillersconstruction Okay thanks for the response.
New subscriber here, would you happen to know if these will have rolling stands like the Dewalts do? Thanks for showing the cut capacity, I'm also wondering if there's a big difference with the stacked lithium batteries?
Hey thanks for subscribing and checking out the video. They have not told me anything about stands for these saws, unfortunately. I plan to install the saws on Dewalt rolling stands for now. Big difference in the stacked, great question! On a big tool like this, you will see a power increase for sure, but not necessarily a run time increase. On Circular saws I have noticed the most increase in power. Also the Flex cordless vacuum if you can believe it, huge increase in suction. Power hungry tools seem to love the Stacked batteries. But tools like the fan, lights, OMT, Grinders, you really cant tell any difference. The stacked batteries just provide such a better delivery of power to the tool in those heavy duty situations. Thats the best I can describe it.
Thanks Brother..@@miillersconstruction
@@kazkomperda2118 any time!
@@miillersconstruction on what level is the power adapter, Stack Lithium or regular Lithium ion battery?
3 years ago I bought some 12 amp hour batteries and last year I bought some 10 amp hour battery for the 10" saw Do you think the 10 amp hour will make a difference?
I think you will see a power increase with the stacked 10.0 battery. For instance if your cutting wet treated lumber, I'm guessing you'll see the saw perform better with the 10 amp. I notice a pretty good boost in performance every time I switch to the stacked batteries, particularly on high demand tools. Run time? That's obviously not going to increase. But performance, yes definitely.
@@miillersconstructionI will almost always have a riving knife and probably never use the cut sensor. How much less run time can you estimate?
@@miillersconstructiondo you think the Stack Pack shelf and bracket fits the 10" kinda like what's on the 8" saw?
@@rickyperkins232 depends on your cutting style honestly and the materials your cutting I'm sure. I think if you're cutting board after board like I was, that extra 5 seconds of run time at the end of each board cut will really add up. I think it's also a convenience factor personally. I know everybody is different, I personally like to turn the saw off between cuts. Dad does not. Hard to estimate on that one man. I love a riving knife but I hate having to take it off as many times as we plunge cut materials. So we just toss it aside lol
@@rickyperkins232 I'll have to measure that but I kind of doubt it. I believe the 10" is larger in depth. Doesn't mean you couldn't modify it though! Not a bad idea.
Nice job flex!
2008ish bought a Dewalt impact with an led,thought it wasn't necessary....at the time building fence outdoors,needless to say I haven't turned down free lighting since.
Really like the auxiliary fence on the little saw.
Will it be an option on the 10?
The 10 has a nicer switch,but the side table and front lock are much nicer on little brother.
My saw is mounted on a Ridgid rolling mitersaw stand,possibly too high but very convenient.
I will never sell my centipedes, they are extremely handy.
Another great real world review !
I believe the fence is pretty much the same on both saws Chip. And I'm with you, the more light the better! Put lights on everything! Thanks for checking out the video Chip. I think both saws are going to be really nice additions. Either one will get the job done.
These days I kind of frown at a tool without lights, I notice with FLEX just about every tool has lights very thankful.
@@rickyperkins232 oh I couldn't agree more. The new compact impacts with the light ring, man they're nice! I need to do a video on those.
@@miillersconstruction dude I can't wait
How accurate is the blade to fence right out the box?
Still testing that Ricky. Good question though. Hopefully I'll update you soon. Need to make a UA-cam short on that one.
dangerous cutting. why are you not using the guard for the table saw?
10 fingers 20 years.
@@miillersconstruction many people say that and end up losing 1 or many fingers. You can never be too careful, thats all I'm saying.
@@miillersconstruction this is the best responce I’ve ever heard. Understand your tools understand the dangers and move on. We got work to do haha
@@user-nk8dm7rj6h you know how your worried about my fingers? I'm worried about your mental state. Have you nothing better to do than worry about my fingers? I'm sure you have your own problems to worry about. I'm just trying to get work done.
@@zanebaker1645 lol!!! Typical troll man. Always worried about everyone but themselves.
Needs legs like the skill table saw
I hate to be that guy, but…..There is no reason to run your left hand past the blade. One moment of distraction and you are open to injury. At least you are using the push stick.😊
Just remember, you don't have to be "that guy". You can simply do things your way, and allow others to do things their way? Just a thought.
Needs to learn how to Pronounce Dewalt correctly.
Sorry. DUH-Walt. I'm not from up north as you can probably tell. If that's your only issue with the video, I'm really happy.
Im Bangladeshi 10 inch best products.
WTF is DEEwalt?
It’s a last name… DeWalt. dehWAHLT.
I think it is garbage