Outdoor Sink Build - Fishing Sink - Tips and Tricks

My in-laws are building a lake house and wanted an outdoor sink they can use to clean up and also to clean fish. My brother in law and I found the sink at a salvage store and then headed to the home improvement box store for the rest of our supplies. The build only took a couple of hours and turned out really well. I included several tips for building tables in the video.
Check out the following Amazon Affiliate links to supplies I used in the video.
Ridgid Drill and Driver - amzn.to/3ffWsWi
Kreg Jig K5 - amzn.to/3fgj09u
Kreg Fence and Stop System -
2.5" Deck Screws - amzn.to/2KTfa8f
Brass Spigot - amzn.to/2KWbQJt
Brass Nipple - amzn.to/2W12Skg
Brass Hose Connector - amzn.to/2xuLYkI
Ridgid 12" Miter Saw - amzn.to/2z6tdER

[@vannrudolph]

Great pacing, precise, and all the right info! Thank you for keeping the commentary focused on the information that is needed, and to helpful tips.
Most of all, thank you for taking the time to edit out unneeded fluff! I know it's time consuming, but I never once had to fast forward through nonsese!
Sub and like. Now to see what else y'all have done that I'll have to add to my never ending list of projects 😂

[@TightWadDIY]

Thank you for the very kind comment. I appreciate the sub.

[@JasonSmith-qx3zh]

Love the workbench setup for yur saw super great video!!!

[@TightWadDIY]

Thanks! It was a great upgrade.

[@shawnafineart1171]

I concur!

[@johntamulonis4626]

nice project! thanks for sharing

[@TightWadDIY]

Thanks! My in laws loved it. Their house is almost finished so we will get to install it in it’s forever home soon.

[@trishtaylorkurnik7712]

Thank you. Great video and design

[@TightWadDIY]

My pleasure and thank you.

[@deltorres2100]

Totally love it

[@TightWadDIY]

Thank you!

[@upegatilisamoa]

Nice video ! Awesome little project ☺️

[@TightWadDIY]

Thanks! My in laws loved it!

[@juliehassen5099]

I love it

[@TightWadDIY]

Thank you. It was a fun, quick build.

[@ale-sv1uo]

Lastima el valde !!!

[@vince9486]

That's a lot of fancy tools and gadgets to build a basic table. You could have put a leg under the bucket and then no need for the short 2x4 at each 4x4 where the shelf attaches by Kreg holes...a lot of over design there.

[@TightWadDIY]

Placing a leg under the bucket would only serve the purpose of supporting the bucket. Adding the two cross braces allows the table to support heavy items all across the bottom shelf. Always plan for the max load when building.
I use the tools I have because it makes things easier, more accurate, and more aesthetically pleasing. You could make this with other tools but why would I?

[@ericbarriga39]

You talk to much

[@TightWadDIY]

Thanks for the feedback.

[@geoffwaters8786]

Welcome to UA-cam 🤦🏼‍♂️

[@trishtaylorkurnik7712]

You do not talk too much! This is a "how-to" video.