Це відео не доступне.
Перепрошуємо.
How to Unjam Your Hot Glue Gun Without Taking it Apart! (5 Methods)
Вставка
- Опубліковано 17 сер 2024
- In this video, we'll teach you 5 methods for unjamming your hot glue gun without taking it apart. Whether you're a beginner or a pro, these tips will help you get your glue gun back in action in a hurry! ****Get a New Hot Glue Gun HERE: amzn.to/41m119G ****Learn Hot Glue Tips and Tricks HERE: • 8 Easy Hot Glue Gun Ti...
Whether you're working on a school project or fixing a broken toy, chances are you've encountered a situation where you needed to unjam your hot glue gun. With this video, you'll have some handy tricks up your sleeve to get your glue gun working again in no time!
📝Disclaimer: This video is NOT sponsored but attached products and resources may be affiliate links. ( :
📕Show Notes📕
💲(Recommended Glue Gun): Dual temp “Gorilla” hot glue gun: amzn.to/41m119G
1️⃣ (PLAYLIST) Everything You Need To Know About Hot Glue:
• Hot Glue Gun Academy (...
2️⃣ (PLAYLIST) Cardboard Crafting Academy:
• Cardboard Crafting Aca...
3️⃣ (VIDEO) How to Use a Glue Gun for Beginners! (Super Helpful Tips and Tutorial):
• How to Use a Glue Gun ...
4️⃣ *(VIDEO) Full-Size Gorilla Hot Glue Gun Review! (The Best Hot Glue Gun?)
• Full-Size Gorilla Hot ...
5️⃣ *(VIDEO) 8 Easy Hot Glue Gun Tips and Tricks (How to Use a Glue Gun Like a Pro)
• 8 Easy Hot Glue Gun Ti...
6️⃣ 🎉⚒️ Get Your FREE Guide of All the Tools that You Need to Start Crafting with Cardboard: thoughtful-kni...
7️⃣ 🎉📃Get Your FREE Cardboard Creation Action Plan: thoughtful-kni...
⬇⏰⏰VIDEO CHAPTERS⏰⏰⬇
0:00 - TIP 1) Check Your Trigger
0:45 - TIP 1.5) Push Deep In The Glue Gun
1:07 - TIP 2) Hot Needle
1:20 - TIP 3.) Cold Needle
2:16 - TIP 4) Cold Pull
3:14 - Tip 5) Dangerous Hot Pull
#MakerBrain #EliTennant #cardboardcrafts #crafting #cardboardproject #craftingideas #craftingtutorials #crafttools #CardboardBasics #diy #diycrafts #diyprojects #diyvideos #diyideas #diycraftswithpaper #hotgluegun #hotglue
🔎Gear Used To Shoot My Videos🔍
- Camera: [my phone]
- Lenses (for my phone): amzn.to/3Z69EDg
- Accent Lights: amzn.to/3EDGDao
- Main Light: Mount Dog softbox: amzn.to/3TBvCeh
⬇️Microphones⬇️
- Lavalier BOYA BY-M1 mic: amzn.to/3AkC9Tw
- Shotgun Movo VXR10 mic: amzn.to/3tCMmr0
- USB podcasting condenser mic (similar): amzn.to/3TCj7il
💻 About Maker Brain:
My name is Eli Tennant and on this channel, you will receive weekly DIY project tutorials as well as maker tips and tools videos. You will also get the "Maker Brain Show" where I go Live every Sunday to help you on your journey of creativity. Whether you are just starting to make your ideas or have been at it a while, Maker Brain has got content to help take you to the next level!
🔵Check out the full video library and Maker Brain UA-cam channel ➡ @Maker Brain
🏆 Mission:
Maker Brain's mission is to help you access and implement your God-given creativity by sharing cardboard crafting tips, tricks, and tutorials so that you can make your best DIY projects at home.
Thanks for watching and God bless you!
- Eli Tennant
In this video, we'll teach you 5 methods for unjamming your hot glue gun without taking it apart. Whether you're a beginner or a pro, these tips will help you get your glue gun back in action in a hurry! ****Get a New Hot Glue Gun HERE: amzn.to/3g4R3Xu ****Learn Hot Glue Tips and Tricks HERE: ua-cam.com/video/QDXA2SafD3M/v-deo.html
Whether you're working on a school project or fixing a broken toy, chances are you've encountered a situation where you needed to unjam your hot glue gun. With this video, you'll have some handy tricks up your sleeve to get your glue gun working again in no time!
Worked for me thanks
I tried to put a pencil in but my pencil got STUCK and now I don't know what to do😭😭😭
Soot, that is a problem! Here is what would try:
1.) Obviously, see if you can heet the glue gun up and pull the pencil out. Use plyers to get a stronger grip if necessary.
2.) See if you have a wire or thin rod to push up the nozzle of the glue gun. You might be able to use it to push the pencil back out.
3.) Your Glue gun nozzle might be able to unscrew. If so, you could take it off (This will be a little of a hot glue mess) and then use a thicker rod to push the pencil out.
4.) You could take your glue gun apart to to remove the pencil.
hope this helps and you can find a way to get it working again!
- Eli
Thanks so much for your answers it was great help and finally twisted it out
Thanks
I am so glad it helped!
@@MakerBrainhello, ive had the same problem but the lids have both melted.(i was using a twosided eyeliner pencil to get more glue out) the glue is also black so i think its really melted. My nozzle doesnt unscrew and i dont have any pliers that i know of
Hmm, that seems like a sticky problem. Unfortunately, I don't have any other advice to share with you that I have not already put in this comment thread (including my video about unjamming your glue gun). At a certain point, there is a time to get a new glue gun to replace one that is dying for good.
I wish I had better news.
- Eli
nice video thankyou brian
Thank you!
What do you suggest when there is glue stuck in the plastic where you insert the stick? Looks like there is melted glue there.
Hmm, that sounds like a sticky situation...
I have never actually had a glue gun with that problem so I can't give you perfect advice, but here are some things I might try.
1. You could try scraping it out with some sturdy wire, needle, nose, pliers, and maybe a knife.
2. You could try forcing a glue stick through the barrel (with the dried hot glue stuck on the inside plastic) a bunch of times to try to wear out the stuck glue.
3. You couldn't heat up and partially melt the end of a new glue stick and stick it into the back of the glue gun. The goal would be to get the melted part of the new glue stick stuck to the glue inside of the glue gun. Then, after you let it cool you might be able to pull it all out. But if this goes wrong, you might just end up gluing an entire hot glue stick to the inside of your glue gun.
4. You could try using a hair dryer or heat gun or even a wood burner or soldering iron to heat up the glue That is stuck inside of the gun and then scrape it out with a popsicle stick.
I hope this helps! Good luck with your jammed hot glue gun.
God bless you ,
- Eli
Thank you for commenting!
I hope this was helpful for you in some way.
- Eli
Hi there this video is awesome I tried the last one it worked out thanks
You can't imagine how glad I am to hear you say that! These are all things that I have done or would do to unjam my glue gun, but I wasn't sure if they would work for other people. It is super encouraging to hear that the last one worked for you!
Have a blessed day,
- Eli
Thnx it helps me a lot thnx again😘
I am glad to help
Please tell about the ball and spring one way valve type mechanism inside the nozzle
Hmm, I have not done a lot of investigation into glue gun check valves, but I'll tell you what I know.
I think most glue guns that advertise themselves as anti-drip probably have a check valve in the nozzle.
Older glue guns that have a simple cone shaped nozzle certainly drip a lot more. I have one glue gun that leaks perpetually. However, your glue gun will tend to leak more if it gets hotter because the glue will be more runny.
The gorilla glue gun has a check valve in the nozzle but still drips a little bit. That being said, the trips are very small and slow, so by the time they reach the table they are pretty much completely cooled down.
After seeing your comment, I did a little bit of research and found a check valve component that can be screwed onto a glue gun and then have a non-Check valve nozzle screwed onto it. Essentially adding a one-way valve to a non one-way valve nozzle.
I hope this helps!
Happy crafting!
- Eli
@@MakerBrain i just removed a valve with a stopper ball powered by a spring in the nozzle but now i am unable to figure which way was it in there...... Although it should be straightforward but it isn't... There is no video about this in YT!
Oh man! I'm sorry to hear that. It sounds like the ball and spring fell out of the nozzle? I have never dealt with this particular issue before so I can't give you a step-by-step solution. If I had the glue gun in my hands I might try to research and troubleshoot some stuff. You could try asking chat GPT or looking for someone else who has asked the same question in an online forum like Quora.
I wish I could help you more.
- Eli
I have like a weird certain blockage with my hot glue gun. The hot glue got pushed back and it created a blockage in the spot where you can see where the hot glue goes and it just takes a lot of force to get even a drop of hot glue out and I doubt that it’s going to make it any easier to put another glue stick in when it runs out.
I wish you made this last year before I ended up with glue all over what I was working on while I tried to jam the glue stick further
Oh my, well, I am glad that I can help you out now.
Thank you for commenting, Sunnysal.
Have a blessed day,
- Eli
I used the wrong end of the Pencil and the Runner is Stick inside
Oh no! I'm so sorry for you. Some other people have had a similar problem where they got the entire pencil stuck inside of the hot glue gun. You might be able to get it out by sticking a small wire in through the nozzle of the glue gun to push the runner out the back. You also might be able to take the nozzle off of your glue gun to do this more easily. Unfortunately not all glue guns have removable nozzles.
You know if this helps you.
- Eli
😮my one is a pencil ink got stuck in the glue gun top idk wat to do!
What type of needle do you use for the hot or cold?
I’ve accidentally put in a size just a little tiny bit bigger than the usual size for my hot glue gun, I can’t get it out and it’s making it not work/not get hot, how can I get it out? I mixed the regular and tiny bit bigger size all together, but I can easily tell them apart bc one is clear glue and one is white glue. Any tips?
My glue gun is not heating just its nozzle is heating and glue is not. Coming out😢 what to do
W I tried the pencil and it worked earned a sub
Awesome! I am so glad that it worked for you.
You being a sub means a lot to me, so thank you!
Have a blessed day,
- Eli
God bless you to👍🏽
I sent my problem before and you sent a message back.thank you so .I fixed it the first time but now I drop it. Do you suggest a new glue gun. God Bless Gay Wood😂
Gabriel Wood, I really appreciate you coming back to let me know that my advice helped you! If the glue gun is not working after you dropped it you probably need to take it apart to figure out what is wrong. If it doesn't heat up I am not sure if I have any great answers... perhaps some wire came out of its place and you could put it back in. If the trigger is not working then you might just have to repair a linkage in the glue gun. That can still be hard - especially because the parts are often rather small. The easy thing would be to simply buy a new glue gun. This is the full-size glue gun that I would recommend (Gorilla): amzn.to/41m119G
have a blessed day,
- Eli
Thank you, my pencil fixed it
I am so glad it worked for you! (I literally just replied to someone who was complaining that they got their pencil stuck in the glue gun.)
Happy crafting and have a blessed day!
- Eli
I just got a new hot glue gun today but dad was supposed to help me but I really wanted to use it and I think I squeezed it well it wasn’t that hot yet Luckily it was only $15 still sad
i was so scared i broke my moms glue gun but i just had to stick a glue stick in there to push it out thank you😭
I am so glad that I was able to help you!
Have a blessed day,
- Eli
What happens when there is glue stuck in the nozzle over time?
I am not entirely sure what you mean, but if you're asking if it is okay to leave your hot glue in the nozzle then the answer is yes. I never pull my glue sticks out of the glue gun when I am storing them.
I hope this answers your question, if not, let me know how else I can help.
Have a blessed day,
- Eli
My gun wasn't working and when I pulled out the glue stick, I realized there was glue stuck in the nozzle, causing a blockage and so the glue wasn't coming out. Unfortunately I pulled the gun and still couldn't get to it and of course couldn't put the gun back together and I tossed it out because I have another one.
So just in case it happens again is there anything that can get that built up glue out of the chamber
@@besgordon
Hmm, That's a tricky one.
If I were in that situation, before I did anything else, I would try to jam a needle up the tip of the glue gun in an effort to clear it out. If that doesn't work, even when the glue gun is hot, I might try heating the needle up with a lighter and then pushing it up the nozzle. If that didn't work I would try letting the glue gun cool down and then pulling the glue stick out. If that isn't possible, pulling the glue stick out while the glue gun is hot might solve your problem (but it probably won't). I don't have any advice for you after that point without being able to work on the glue gun myself.
YALL I GOT A PENCILS STUCK IN MINE ANY TIPS?
Hiya! I was confused last night when nothing was coming out. So, I stupidly pulled the glue stick out… this made the hot glue jam in the insert of the glue stick. So I cut it, and now there’s half a glue gun stuck and I can’t get it out 😂 AND it appears jammed in the nozzle. Trying to fix it!
OH NOO!!! I PULLED OUT MY GLUE WITHOUT LOOKING AT A TUTORIAL😭 usually turn it off and back on again fixes it but it isnt working this time :(
Nothing worked at all
I'm sorry to hear that. Can you tell me more about what kind of glue gun you have and what the problem is? Maybe I can find a way to help you.
- Eli
In Hindi plz
I wish I knew Hindi, but I have lived in the USA all my life. Hopefully one day I will be able to pay to have my videos dubbed into other languages.
- Eli
brian hi sheardyouout in my community tab
Thank you very much, I really appreciate that.
- Eli