is 20 to 25 Nm for tightening all T45 bolts of the MA unit. At 23 Nm I had a perfect squeeze out of the blue sealing plastic at the both ends of the metal seal between block and MA unit. Be retightening the MA unit, I'd use a new metal gasket. Hope that helps
@@mechanical-MAT Thanks man I managed to take it out following your steps to reassemble it. so now I am on that final step of starting the engine I see it is taking longer to start it cranks and cranks the same as in your video, tell me what did you do to make it start?
@@mechanical-MAT That cant be right.... Checked, its 22NM, back 90 deg., then 22NM again, then 90deg, and then another 90 deg.... can you show a link where its only 70 NM?
✅✅✅✅Naic
♥️♥️♥️♥️
A great job!
Please do you have the Torque moments for the upper Head (Multiair head), the Multiair screws and the Camshaft brackets?
is 20 to 25 Nm for tightening all T45 bolts of the MA unit. At 23 Nm I had a perfect squeeze out of the blue sealing plastic at the both ends of the metal seal between block and MA unit.
Be retightening the MA unit, I'd use a new metal gasket. Hope that helps
For a camshaft caps . 25.7NM to 31NM
@@mechanical-MAT thank you very much!
Wonderful video! I hope to see one on the Alfa 159 2.4 jtdm. Thanks
Thanks... in the future possible!
34:00 Can someone please tell me the name of that part. mine is faulty but i cannot find a part number or figure out the name of it. Many thanks
Anasiiiib lah iwufaaa9
Amin
Great job, how did you remove the head it seems like it has been sealed.
Cylinder head gasket damage because no coolant
what must I use to take it out because a flat screw seems like will damage this thing any suggestion?
You had to unscrew the screws at the hot engine.
@@mechanical-MAT Thanks man I managed to take it out following your steps to reassemble it. so now I am on that final step of starting the engine I see it is taking longer to start it cranks and cranks the same as in your video, tell me what did you do to make it start?
@@comfortmazibuko1921 hi
Brilliant work
Thanks
20w50 oil ?
In doha it too hot temperature
Only for frist start and engine flash. After 3 hour I change it 5w30
how much it cost for over hauling 147 1.6ts
For ove hauling it 5000qr labor charges + spar parts
70 NM only? no 90 degrees add?
No 90 degrees add 👍
@@mechanical-MAT That cant be right.... Checked, its 22NM, back 90 deg., then 22NM again, then 90deg, and then another 90 deg.... can you show a link where its only 70 NM?
Can you replay?