OUR VR6 AUDI SWAPs EXPLAINED PT.1

Поділитися
Вставка
  • Опубліковано 2 січ 2025

КОМЕНТАРІ • 153

  • @turbosmike2046
    @turbosmike2046 5 років тому +11

    The knowledge here is amazing and the experience in platform shows! You need to make more videos, maybe about searching parts and buying parts ect...you could dominate UA-cam! 🤘

  • @volkswagon92vr
    @volkswagon92vr 4 роки тому +1

    I went single turbo conversion w/2.8 heads ,liquid to air, duel fuel pumps. Should be on the road in few wks.... still im 100% regretting not going for the vr swap. Very nice job on the cars guys

  • @2fast225
    @2fast225 5 років тому +29

    2.5 Swap / 5 cyl 07k B5 Swap coming on the channel soon?

    • @gnarshread
      @gnarshread 5 років тому +2

      Yes!

    • @rype36
      @rype36 5 років тому

      I've stalled on my 07k b5 swap...just gonna go 12v vr6

    • @2fast225
      @2fast225 5 років тому

      856XerXes some people in Arizona were gonna do a 07K swap with Iroz, don’t know what happen with that..

    • @balcyvr6
      @balcyvr6 5 років тому

      Please someone do a vw 5 cylinder turbo swap build! I can't do it and I've been trying to find good ones for a couple years lol

    • @Lp22-b1u
      @Lp22-b1u 5 років тому

      @@balcyvr6 check Alm Racing ua-cam.com/video/p98BfeeNzyo/v-deo.html

  • @sanjincattunar6859
    @sanjincattunar6859 5 років тому +2

    Thanks again guy's for doing this video and get time to explain in short terms, even if im from Europe, Croatia 🇭🇷 to be exact, and i have some issue with imperial to metric system isn't such a big deal, there's always google 😉. But for real, keep up with good work and many more news,updates, tour event's, it's all good information. Just film some from dyno tuning and similar if it's not too much to ask for! Big regards from Rijeka, Croatia 🇭🇷 Malaka G & S

  • @63Mrnova
    @63Mrnova 2 роки тому +1

    Great job 😊 Keep moving forward is the goal, and always learning on the way.

  • @ocavant
    @ocavant 5 років тому +2

    No heater and no A/C= Race Car Great builds guys. Would this conversion be possible with heat/AC?

  • @dhanssolo
    @dhanssolo 2 роки тому

    My b5 a4 1.8t (ATW) has 215k miles on it. Im thinking of fitting a 4.0 w8 in whenever the engine completely goes. This video is inspiring

  • @mk3whitewide
    @mk3whitewide 5 років тому +2

    Love me some vrt. Silver one is sweet but that red one is extra sweet looking.

  • @cannabis_culture518
    @cannabis_culture518 4 роки тому +2

    Really informative guys !!!!!

  • @darius9521
    @darius9521 5 років тому

    I like that you guys have different setups and sticking to it

  • @Jolinator
    @Jolinator 5 років тому +5

    Tremendous video.

  • @JuergenGDB
    @JuergenGDB 4 роки тому

    I had a 2004 VR6... strong engine.. had Neuspeed 70mm exhaust, DP... sounded great.. again it was a very reliable strong engine.

  • @perez13691
    @perez13691 5 років тому

    Im so happy to have found your channel 🙏🏽🙏🏽🙏🏽🙏🏽 not alot of support in my area for the do it urself guys that work on Audis i have 93 s4 2.2 5banger needing a new turbo u have inspired me to get to wrenching. This vr6 is a badass build💯 much love from Ft Collins Colorado..

  • @danny_vrsociety
    @danny_vrsociety 5 років тому +2

    Loving the VR content, malakas! Can't wait to see them rippin' again.

  • @RetreatHacker
    @RetreatHacker Рік тому

    Wow, just started exploring vr6 swap

  • @ssjrockooo1407
    @ssjrockooo1407 2 роки тому

    You guys made me enjoy the process and progress on the vr6 b5’s that I want to do a vr6 swap on a b8 a4 in the future

  • @89foxguy
    @89foxguy 5 років тому +3

    👌👌 Man I'd love to do this swap I just don't know, it's over whelming.

  • @gregs90quattrocoupe
    @gregs90quattrocoupe 5 років тому +1

    Nice, George and Stav.

  • @rayhitz5666
    @rayhitz5666 3 роки тому

    Any videos on the difference in diverter valve and custom blow off valves? How to install the custom blow off valve, where and can you use both or take out the diverter??? Help

  • @TurboDub1991
    @TurboDub1991 2 роки тому

    You guys don't play no games! Excellent cars

  • @gnarshread
    @gnarshread 5 років тому +1

    Great video guys!

  • @justint5625
    @justint5625 2 роки тому

    I had a 93 Corrado VR6 superchargered Z1 engineering with borla exhaust and kw coil overs. Also never dropped the compression man did that car go💨

  • @cruzanlusion9159
    @cruzanlusion9159 5 років тому +4

    I love it u should get way more views

  • @blairarmishaw7329
    @blairarmishaw7329 5 років тому +2

    Hi, I love your videos, I have a A3 3.2 vr6 Quattro, I want to turbo it , so your videos do give me some good ideas, but can you give more information about the good and the bad of a product, etc why you buy it, why it did not work as you thought, the change , the price , where you got it from. We all go through a learning curve, it would be nice, if we didn't need to go through the same mistake. And yes more links, turbo , exhaust, pump ,computer, any parts you talk about that are different.Ok thanks .

    • @mateuszb.4011
      @mateuszb.4011 5 років тому

      My mechanic did 2,8 VR6 2009 TT (and increased it to 3,0 later) and turbod it(garret r36). The only problem he had was that at high boost when a big torque came up the trans used to deattache. So he just bolted some rails to the frame and now trans just gets blocked by those and doesn't move anymore

  • @dannycoultas265
    @dannycoultas265 Рік тому

    Been waiting time to see the b5s again love the vrs3 but my heart lyes with the old school

  • @jessevasquez2774
    @jessevasquez2774 4 роки тому +1

    Looking good guys 👊🏻

  • @jdubayou9498
    @jdubayou9498 5 років тому +1

    Way back I had a 2001 mrk 4 gti with a vr6 and a vf engineering’s vortec super charger kit and it was slow 14.8 was the best I got but the car ran forever

    • @jdubayou9498
      @jdubayou9498 5 років тому +1

      Idk probably slow slow never ran it stock

  • @jasonsands5823
    @jasonsands5823 4 роки тому

    Do you guys think this would work in a a B5.5 Passat Wagon? What you have done looks amazing!

  • @mrAudisubaru
    @mrAudisubaru 5 років тому

    Really like the 24V VR6 but would prefer the oem instrument cluster and ecu like it is set up on the 12V.

  • @shakejunt7036
    @shakejunt7036 5 років тому +1

    So why would the vr6 be better than a 2.7t? I mean just the simple fact that you can go single turbo? Or is the engine better overall???

  • @thedetaildad9688
    @thedetaildad9688 5 років тому

    Definitely interested in the links ! Haha can’t seem to find the motor mounts on the 24v :)

  • @TJR32100
    @TJR32100 4 роки тому

    How about that radiator core? Can you tell us more about it? Thanks.

  • @biggaG75
    @biggaG75 5 років тому +1

    How does it compare to the rs3? Wouldn't mind seeing them up against each other..

  • @America_Countryhumans1
    @America_Countryhumans1 Рік тому

    Sick strut brace

  • @harp_attack
    @harp_attack 5 років тому

    Thanks for the parts list. I'll be starting my VR6 project soon and this will help a lot. :)

  • @AudiSportWagon
    @AudiSportWagon 5 років тому

    Thank you for this knowledge! Much love from Austin,Texas! 🍻

  • @alien_brain
    @alien_brain 4 роки тому

    dang yalls cars are fricken dope

  • @billasohyeah
    @billasohyeah 5 років тому +1

    What is stav's 12v hp? Love your vr6s. Amazing.

  • @captainsledge7554
    @captainsledge7554 Рік тому

    I really wanna know what exhaust they have in clip 3 that made the car sound like an exotic 6cyl

  • @jerrycaille
    @jerrycaille 3 роки тому

    Great work !

  • @FrenchJohn
    @FrenchJohn 5 років тому

    Giving me ideas for my next project. Thanks for sharing guys ;)

  • @craigferguson2057
    @craigferguson2057 5 років тому +2

    Damn good video 👍🏻

  • @masonpugh3637
    @masonpugh3637 7 місяців тому

    Great video

  • @balamramos4101
    @balamramos4101 5 років тому

    Please check your grey dog's left ear. The other dog was smelling it for a bit and he was scratching it... maybe ear mites.

  • @t1bud42
    @t1bud42 4 роки тому

    Could you turn that 90• fuel fitting and run the fuel line under the plenum?

  • @justint5625
    @justint5625 2 роки тому

    Looking good boys 🤙🤙🤙

  • @waca2023
    @waca2023 Рік тому

    The wine red Audi has a much more efficient and straight forward cooling system.
    Have misgivings about the early 12 valve VR6s - light cam bearing cap design, unusual engine wobble at idle, oil pressure issues 😢. But it was still a good engine if taken care of. The 24 valve VR6 is a total FREAK! It's like a Kardashian Woman: beautiful and athletic, but hot headed, expensive, and temperamental.
    Btw - both girls get pissed off if you ignore them.
    Jason Wampler

  • @fredjones5327
    @fredjones5327 5 років тому

    Damn guys absolutely amazing!!!!

  • @SweetWrapsGarage
    @SweetWrapsGarage 10 місяців тому

    If you don't mind me asking what's the range of cost for a swap like this? Blew the motor in my b5 that I just did maintenance on 40k miles ago and want to make the change.

  • @pimpslayer9109
    @pimpslayer9109 2 роки тому

    Love to see this

  • @georgemerino4782
    @georgemerino4782 4 роки тому

    Damn I remember Justin’s white car beast!

  • @nathanpettey7568
    @nathanpettey7568 Рік тому

    Do u guys have any non high horse power builds. Like a reliable daily

  • @johnreynolds2240
    @johnreynolds2240 5 років тому

    maybe use a TDi fuel return cooler rad under the car.........for the water/intercooler

  • @MrRaybj
    @MrRaybj 3 роки тому

    What did you use for the radiator mount frame? I'm going to try to put a Mishimoto universal radiator in my b5 a4?

  • @stevenharpervw
    @stevenharpervw 5 років тому

    Hey! I’m just building a Vr6 corrado. Totally standard, engine is a AAA from a mk3
    I wired fuel to the battery and the engine does start and runs, when I connect it to pin m2 so the ecu can control and prime the pump it does not work,
    I have pin 30 and 30b with a jumper wire.
    Relay 12 all wired correctly, and tested it is working
    M2 for powering fuel pump connected. And not working. I know the ecu grounds the signal wire to turn on and off the fuel pump, am I missing something else or an extra ground etc??? Looked on line but no one can help me .

  • @YoungSaiyanMan
    @YoungSaiyanMan 2 роки тому

    Wish y’all were around me I’d love to help build my laser

  • @jeremyswingle4752
    @jeremyswingle4752 Рік тому

    I can't find the coolant pipe your talking about do you have a number for it?

  • @jasonwillis7413
    @jasonwillis7413 5 років тому +1

    Stav is gorgeous
    He’s a dime piece

  • @ricardohay4653
    @ricardohay4653 11 місяців тому

    Who did the turbo header?

  • @humblebeginnings3419
    @humblebeginnings3419 5 років тому

    Keep the videos coming 👍

  • @jomamasfavor8
    @jomamasfavor8 5 років тому

    This is awesome! you guys said you had some work done in vegas, so I was just curious where are you guys from?

    • @jomamasfavor8
      @jomamasfavor8 5 років тому

      Lol jk later in the video you said California

    • @MalakaMotorSports
      @MalakaMotorSports  5 років тому +1

      Joseph Garay we are originally from NY. Born and raised.

  • @miguelarturofrias2317
    @miguelarturofrias2317 Рік тому

    What gearbix bell housing works for the b5

  • @davidwright3390
    @davidwright3390 3 роки тому

    Why did you swap the 2.7 v6 for the vr6 just out of curiosity

  • @doublevanoz
    @doublevanoz 5 років тому

    Looks like a hudge process. I over the vr... But is it worth it, what's the benefits, or is it a passion thing?

  • @RATDATSUN
    @RATDATSUN 5 років тому

    13:05 "Open Dump" Thats hawwt

  • @sellingthewind
    @sellingthewind 5 років тому +1

    hahah you guys are insane. love this

  • @audi_steve8363
    @audi_steve8363 3 роки тому

    How much would a build like this cost? Also have this been done on the B8 models ?

  • @JuanBrolo
    @JuanBrolo 3 роки тому +1

    Hey guys I keep having so many issues with my 1.8t a4 ultrasport and I am wanting to swap a different heart into it. Do you think the ve 2.5 5cyl with a turbo or a vr6 3.6 fully bolted would be better I want to keep ac and can make custom lines

    • @MalakaMotorSports
      @MalakaMotorSports  3 роки тому

      Vr6 all the way

    • @JuanBrolo
      @JuanBrolo 3 роки тому

      @@MalakaMotorSports what is the best vr6 to fit into the b6 chassis I've put alot of work into this car. Full b7 s4 interior swap, koni coil overs, carbon side skirts, oem b7 rs4 wheels no spacers with a perfect tuck. I really don't want to get another car I haven't seen many b6 as clean as this car so a new engine type is a must 1.8t is just garbage and sounds like a pissed off Honda. I thought about a vw 2.5 built turbo but if a vr6 is easier and tuning would be easier I will go this direction.

  • @bamgohardgamingok8554
    @bamgohardgamingok8554 3 роки тому

    Hey fellas..I have a 2002 Audi A8 an I love the car and want to make it fast a little at a time..I’m not swimming in money..lol I would like to pick your brain on steps to take..I don’t know how to message on here

  • @mateoarellano3193
    @mateoarellano3193 5 років тому

    Bro I’m thinking about getting a 2000 a4 b5 what should I look for? Like con wise. Pls make a video for how much a vr6 cost

  • @AudiophileTubes
    @AudiophileTubes 5 років тому

    So, is this going to be your fastest Audi project to date? What is the HP and torque of that beast, when you're done?

  • @freebird4450
    @freebird4450 4 роки тому

    superb

  • @cryptoholic5676
    @cryptoholic5676 5 років тому

    Vr6 swap better than 4.2 v8 swap? Or which one is easier for a first time build.

  • @cbr600f478417
    @cbr600f478417 Рік тому

    Bro idk if u even check these but im trying to do a vr6 swapped to my 2012 audi a3 do u have a guide

  • @RATDATSUN
    @RATDATSUN 5 років тому

    9:24 I wanna know more about that dog!

  • @BarrioHoncho
    @BarrioHoncho Рік тому

    tryna do this in my b7

  • @1609-d6c
    @1609-d6c 2 роки тому

    what transmission did you use?

  • @arablues4142
    @arablues4142 5 років тому +2

    Need vr6 swap....

  • @rexmemore
    @rexmemore 3 роки тому

    whats the estimated cost of vr6 swap in an a4 b6 if i already have the engine?

  • @dariuscarpenter7211
    @dariuscarpenter7211 4 роки тому

    what front clip are you guys running? custom build?

  • @davidl2473
    @davidl2473 5 років тому

    are you guys on Audizine or Quattroworld?

  • @jamest5149
    @jamest5149 4 роки тому

    A water to air intercooler isn’t anywhere near as efficient as a air to air intercooler... where you gain is you can drop some ice in the tank to pull down IAT’s... this is only suitable for drag races and 1/2 mile events etc where the runs are very short. Track or road use the air to air is king.

  • @DustySteel
    @DustySteel 5 років тому

    Are your cars rwd like the car on the dyno?

  • @fakealexstrong
    @fakealexstrong 5 років тому +1

    I love you guys. 🤙🏽

  • @36DAMZ
    @36DAMZ 5 років тому

    Which is best 12v or 24v or is it personal preference

  • @TheMikeownsyou
    @TheMikeownsyou 4 роки тому

    How much was this build??? I wanna do that to mine! 😍😍😍

  • @fusemalaysia840
    @fusemalaysia840 Рік тому

    🙏 thank you for global cast for unchain me...

  • @zmeyrs6283
    @zmeyrs6283 5 років тому

    So .....is that rs4 cluster for sale?

  • @Channel_V2017
    @Channel_V2017 5 років тому

    What Trans you running? Thanks

  • @J4YMIAH
    @J4YMIAH 5 років тому

    You guys are awesome!! Love the 12v vr6!!!

  • @davidl2473
    @davidl2473 5 років тому

    that hibiscus looks very familiar

  • @nickovdub6131
    @nickovdub6131 5 років тому

    What's the reason you chose thre vr6 over the standard 2.7 V6?

    • @cruzanlusion9159
      @cruzanlusion9159 5 років тому +1

      Easier to fix I would say when it time to change the timing chain and turbos..it alot of work

  • @pimpslayer9109
    @pimpslayer9109 2 роки тому

    First car is a 1996 a4. I cannot find the will to part with this thing

  • @mk3gtidriver
    @mk3gtidriver 5 років тому

    Vr6 beasts 😎👍🏼

  • @francoislacoste-u8r
    @francoislacoste-u8r Рік тому

    bonjour je voudrai un renseignement quel et la ref de ce couvre culasse

  • @FFerPedroMack
    @FFerPedroMack Рік тому

    you guys are dope

  • @christopherdewdney7565
    @christopherdewdney7565 5 років тому

    Yaay VEMS

  • @A4TuRbO13
    @A4TuRbO13 5 років тому

    Sad that these motors are so underrated and overlooked outside of the VAG community.

  • @TheClimber13
    @TheClimber13 5 років тому

    I need 2.7t crank main bolt torque specs anyone?

  • @EricvZ1967
    @EricvZ1967 5 років тому

    I didnt do a swap, and still have an Audi with a VR6.. :P