*Works well for a DIY home improvement job **MyBest.Tools** A little sloppy in the cut. Water reservoir is too small. Cut one 20" tile - time to refill.*
Just pulled off an angled cut on a 48 by 24 inch porcelane tile..never could have done it without your UA-cam channel...many thanks !!! (You're a Rock Star in my book)
I really want buy one of them but I'm really disappointed about 45 degree cut. I see you cut tile but only the long side but what about short side ? Can't because tile is to long (mean to wide). What maximum wide you can cut ? 30cm wide ? Shame, probably must buy Rubi or similar:(
Nice review , which model of table u use for D36000 ? , looks like D24001 , Just order saw D36000 and no idea with table be fit right ? If u can let me know be great , thanks bud
Great video! My only request is that you do a video showing you break it down for transport. As heavy as it is, it would be nice to know how manageable it is by myself and how it would get packed up. Thanks!!
I am going to buy a new table saw and I am wondering which one you would recommend me the best? Dewalt D36000 or the Dustless IQ tile saw? Please your answer is very important to me. I work mostly with residential, I was more into the Dustless IQ because I do second floors bathroom remodeling and I could set it up upstairs. That would be wonderful. I also already have the older dewalt wet saw. So what do you think???
@@LandbergTileTV I already have the dewalt 7 inches. What difference do see between then 7 to the 10? And in which scenario would you recommend the IQ tile saw?
Love your videos. I am trying to find a wet saw that will serve all my needs which d36000 seems to be the one, however, I do landscaping block (AB Block) and the caps are 3 7/8 thick. I am aware this is greater than the d36000 max depth cut but the depth is enough that a quick tap and clean up with the grinder will be fine. I would need the almost 4” cap block to pass under the saw. So Any comments would be appreciated.
RIGHT ON ! JUST BOUGHT ONE FOR MY WIFE WE HAVE 24X48 PORCEALINE TILES SO THE FOAM BOARD HELPS WE HAVE TWO. D24000 DEWALT SAWS NOW THE D36000 1100.00 HOMEDEPOT DELIVERED NO STAND. BUT...THE D24000 STAND FITS IT
The max rip to the left of the blade is 18". We upgraded from the D24000 to the D36000 a few months ago and just love the bigger saw. Most of our work these days is with 2cm thick porcelain pavers to decks and patios. The accuracy and repeatability are impeccable. We love the huge rip clearance to the left. 24 x 24 pavers weigh 40 lbs and on the smaller DeWalt they get tippy when you're making a small rip cut. With the 18" left of blade and a more substantial support table to the right, the D36000 doesn't have this problem. Excellent saw and we are getting a lot of work out of it.
Damn it! From the start, I was like, meh....... We've been fine running our D24000's for a decade. Then you mitered that 12x24 face up. Done! Sold. 2 of my D24000's will go up for sale in about 10 minutes. 2 D36000's will save an astronomical amount of time on our large jobs full of outside miters and/or returns..... Which is what we are known for doing with perfection. But also, mitered inside corners, with all of these beveled and 3D tiles.. We also do alot of quartz, marble, corian, stone, etc. Miters for days. It pays the bills. So Bring it on! I may as well tell myself, this will justify my 2 new saw purchases... Large format 2x4 being an easy single person task on the saw, that's also a huge deal man. Super stoked to beef up the collection. 👍💯 Thanks for the video brother! To the point, with proof. Gotta love it. 🤘 Take care @Landberg Tile TV 👊
Good video. I didnt like the D24000 but that ripping capacity on this one is nice. Cant believe they didnt add a gravity stand. Or atleast one with some wheels.
Longest rip for sliding tile saw! At the same price the Rubi dc 250 will rip Just shy of 4' You've also got montolit, imer,pearl heck even QEP and Harbor freight offer a bridge tile saw. Give some love to us bridge saw guys and try one out please! :)
It looks good, and too It looked like it struggled a little and I could be wrong... mobility sucked in comparison with the older model. I wish Dewalt fixes that.
@@LandbergTileTVhuh, what's so different about them other than one is water-based, and the other is waterless, please enlighten me in that future video.
This saw is coming to Australia would you buy an IQ or the Dewalt the IQ is nearly double the price $1699 DeWalt. $3050 for the IQ bare no accessories cheers Red
love the DeWalt saws..! they are definately the most innovative saws out there just like their table saws! HOWEVER!! you didnt cut straight through on the 24 x 48! Which is what I wanted to see.. you obviously turned it around. Why didnt you show THAT?
Dewalt D36000 Specs and Pricing: amzn.to/36LRca5
Hi can You read my comment below pls :)
*Works well for a DIY home improvement job **MyBest.Tools** A little sloppy in the cut. Water reservoir is too small. Cut one 20" tile - time to refill.*
Just pulled off an angled cut on a 48 by 24 inch porcelane tile..never could have done it without your UA-cam channel...many thanks !!! (You're a Rock Star in my book)
Thanks brother, appreciate it!
I really want buy one of them but I'm really disappointed about 45 degree cut. I see you cut tile but only the long side but what about short side ? Can't because tile is to long (mean to wide). What maximum wide you can cut ? 30cm wide ? Shame, probably must buy Rubi or similar:(
Been using MK 101 saws for years, upgraded to the 36000 about a month ago and it's been amazing. Keep up the great videos man!!
Thanks! Will do!
The mk is obviously a superior saw
I just bought one can’t wait to test it tomorrow 🎉
Nice review , which model of table u use for D36000 ? , looks like D24001 , Just order saw D36000 and no idea with table be fit right ?
If u can let me know be great , thanks bud
same stand for both saws
Hi guys. What about the thick, big slabs? Like sandstone 35/24"? Won't be to heavy for the machine? I'm landscaper.
Great video! My only request is that you do a video showing you break it down for transport. As heavy as it is, it would be nice to know how manageable it is by myself and how it would get packed up. Thanks!!
Thanks for the idea!
I am going to buy a new table saw and I am wondering which one you would recommend me the best? Dewalt D36000 or the Dustless IQ tile saw? Please your answer is very important to me. I work mostly with residential, I was more into the Dustless IQ because I do second floors bathroom remodeling and I could set it up upstairs. That would be wonderful. I also already have the older dewalt wet saw. So what do you think???
I would go with Dewalt, been around forever!
@@LandbergTileTV I already have the dewalt 7 inches. What difference do see between then 7 to the 10? And in which scenario would you recommend the IQ tile saw?
Love your videos. I am trying to find a wet saw that will serve all my needs which d36000 seems to be the one, however, I do landscaping block (AB Block) and the caps are 3 7/8 thick. I am aware this is greater than the d36000 max depth cut but the depth is enough that a quick tap and clean up with the grinder will be fine. I would need the almost 4” cap block to pass under the saw. So Any comments would be appreciated.
RIGHT ON ! JUST BOUGHT ONE FOR MY WIFE
WE HAVE 24X48 PORCEALINE TILES
SO THE FOAM BOARD HELPS
WE HAVE TWO. D24000 DEWALT SAWS
NOW THE D36000
1100.00 HOMEDEPOT DELIVERED
NO STAND. BUT...THE D24000 STAND FITS IT
Just got this saw. It’s awesome so far!! Thanks for the vid dude. Very helpful!
Great to hear!
Hello! I want to order this model from America. I live in Israel and we have a 220 volt outlet. Is this model rated for 110v or 220v?
Great video brother. I've been waiting for this one since the first one you did. God bless 🙏🏻👍🏻👊🏻
Yes sir! Thanks for the watch 👊
@@LandbergTileTV
No problem brother. Thank you!🙏🏻👊🏻
great job and great movie !! love the channel. keep up the good stuff !!
Thanks, will do!
Comparing the IQ tile saw to the DeWalt 36000 model what's the better saw ?
both have their places, both great saws. Do you currently have the D24000?
@@LandbergTileTV yes it's 7 yrs old the 24000ans I'll be either buying the IQ saw or the DeWalt 36000 ...just not sure which one I should buy
Even glass too. Wow! Awesome.
Great video. That saw is amazing. I just bought a D24000 and its awesome.
Nice 👍
Nice video... Do you know the MAX width of a tile that will clear the arm when cutting a miter facing up? I see the 12 W x 24 L cleared it no problem!
That's a great question, I'll have to check and add that to my upcoming Dewalt d36000 review video. 👊
The max rip to the left of the blade is 18". We upgraded from the D24000 to the D36000 a few months ago and just love the bigger saw. Most of our work these days is with 2cm thick porcelain pavers to decks and patios. The accuracy and repeatability are impeccable.
We love the huge rip clearance to the left. 24 x 24 pavers weigh 40 lbs and on the smaller DeWalt they get tippy when you're making a small rip cut. With the 18" left of blade and a more substantial support table to the right, the D36000 doesn't have this problem. Excellent saw and we are getting a lot of work out of it.
Gotta get me one of these. And more shower ideas braddah always love those 🤙🏽💯
I have more coming up! I'm finally healed up so I can get back to it 👊
Damn it!
From the start, I was like, meh....... We've been fine running our D24000's for a decade.
Then you mitered that 12x24 face up. Done! Sold. 2 of my D24000's will go up for sale in about 10 minutes.
2 D36000's will save an astronomical amount of time on our large jobs full of outside miters and/or returns..... Which is what we are known for doing with perfection.
But also, mitered inside corners, with all of these beveled and 3D tiles..
We also do alot of quartz, marble, corian, stone, etc. Miters for days.
It pays the bills. So Bring it on!
I may as well tell myself, this will justify my 2 new saw purchases...
Large format 2x4 being an easy single person task on the saw, that's also a huge deal man. Super stoked to beef up the collection. 👍💯
Thanks for the video brother! To the point, with proof. Gotta love it. 🤘
Take care @Landberg Tile TV 👊
Thanks brother! Appreciate the comment! 👊
Good video. I didnt like the D24000 but that ripping capacity on this one is nice. Cant believe they didnt add a gravity stand. Or atleast one with some wheels.
Gravity stand might come soon
@@LandbergTileTV good to hear
@@LandbergTileTV i just didn't like the way the 24000 was put together. It cut fine but was a pain to transport.
Cant seem to find the foam board, where did you buy / what's the brand
You can find Go Board at your local Lowes store.
adjusting the tile while the blade is running can destroy the perfectly str8 edge & allowing the large piece to pop up at the end can break the corner
Not if you do it slowly and carefully. We do it all the time cutting large tiles
شكد السعر اخي
Longest rip for sliding tile saw!
At the same price the Rubi dc 250 will rip
Just shy of 4'
You've also got montolit, imer,pearl heck even QEP and Harbor freight offer a bridge tile saw.
Give some love to us bridge saw guys and try one out please! :)
I'll pit up a video soon on bridge saws 👊
It looks good, and too It looked like it struggled a little and I could be wrong... mobility sucked in comparison with the older model. I wish Dewalt fixes that.
I don't understand how you got the tray to move so far?... I mean you went almost as far as the tail end of the blade. Help.
Actually I found the issue...The tray is warped just enough to stop the 'sled' from gliding past it.
Looks good. Would be nice to have put break on the blade, so you dont have listen to the plane land
Thanks for Another great video 👍
No problem 👍
That wet saw water has all kinds of different cut slag in it!!
Thanks for the video 🌞
good? but $$$$
@@rinatabe.1702 $1199.00
I think it is good.
You’re welcome 👊
@@leoisaak ok. Sorry, shipping is another $ 500 from the USA
@@rinatabe.1702
I am sorry brother...
what about vs IQ?
2 different saws for to different applications, but yeah, comparison video will come 👊
@@LandbergTileTVhuh, what's so different about them other than one is water-based, and the other is waterless, please enlighten me in that future video.
This saw is coming to Australia would you buy an IQ or the Dewalt the IQ is nearly double the price $1699 DeWalt. $3050 for the IQ bare no accessories
cheers Red
dewalt all the way
@@LandbergTileTV thank you
Same motor as 24000?
I think so
love the DeWalt saws..! they are definately the most innovative saws out there just like their table saws! HOWEVER!! you didnt cut straight through on the 24 x 48! Which is what I wanted to see.. you obviously turned it around. Why didnt you show THAT?
Only tradesmen would know that..🫵
Still can’t get over the fact that for almost 1,200$ you don’t get a stand!!
It comes with a stand. It's all in one single box.
What I wanna know is... Will that arm fit on the 24000? 😏 Man, that would be great
Wish it would!
fit into a height of 55 cm?
You didn't measure the accuracy of the 2'x4' porcelain rip 😜
lol, I forgot..
Love the patriotic flags on the bucket and headphones
yes sir, love my country!
Cut some quarry tile
beautiful saw. I just wish you lads would stop using medieval tape measures. Just use metric lads it’ll change your life’s 😂.