Це відео не доступне.
Перепрошуємо.
How to Replace a Headlight Bulb Fiat Ducato, Peugeot Boxer, Citroen Relay vans
Вставка
- Опубліковано 18 лют 2019
- In this video I show how to replace a blown headlight bulb, and how to remove the headlamp unit to gain access, the fiat ducato, Peugeot boxer and Citroen Relay are all the same.
Link to H7 Bulbs £6.99 for 2 on amazon amzn.to/3rR2iST
Link to all tools used www.amazon.co....
Big Thanks! (& Have just transferred that as well.) The original Fiat manual incorrectly notes one should disconnect the electric connector first - but even trying to do so is a nightmare and, worse, thanks to you we now know there’s no need to do so whatsoever. We’re in Italy at the midst of our maiden trip with our new second-hand Ducato L3H4 and were delighted to find your clear explanation. Saved us time, headaches & spared lots of alternative sunshine opportunity! THX!
Glad it helped Walter, you sir are a true gentleman Thanks for the great comments👍🏻👍🏻🛠
Awesome! Did the passenger side, didn't have to remove the unit. Wouldn't have been able to do it without this video!
Glad it helped! Thanks for the great comments👍🏻👍🏻🛠
Was getting a migraine thinking of how to do this & was about to take it the garage to get them to do it instead lol. You've saved me some valuable time & money from being off the road! Excellent video!
Thanks for the great comments 👍🏻🛠👍🏻
That just saved me about an hour of my life I would never have got back…. I have a Peugeot boxer and hoping the same system applies 🙏🙏⭐⭐⭐⭐⭐
Thanks for the great comments👍🏻👍🏻🛠
Man, what a great video! Exactly what I have been doing this Sunday afternoon. Why they make these things so much more time consuming than it needs to be is beyond me
Glad to help! Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 Honestly, fantastic. Was going a little nuts 😂 but you came to the rescue, cheers again 👍🏻
Doing mine today , what a fantastic video , cheers dude 👍🏽
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
Thanks to this video, you gained a follower from Turkey. Thank you so much. Greetings from Istanbu
Thanks for the sub! and Thanks for the great comments👍🏻👍🏻🛠
Thank you, couldn''t have done this without you.
Glad I could help Thanks for the great comments👍🏻👍🏻🛠
I've seen that it's advisable to take those bolts out and put copper slip on them to stop them siezing in place. Thanks for the no-nonsense vid.
Thanks for the great information👍🏻👍🏻🛠
Just had the same problem in that did not realise you need to push unit to side to extract .... sorted and thank-you
Thanks for the great comments👍🏻👍🏻🛠
Thanks, worked a treat, I thought there's no way I'm getting my hand in there. You could probably just manage to do the nearside bulb, but I would still do it this way.
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
I couldn't work out how to remove the bulb. Thanks for showing you just need to pull with plyers.
Thanks for the great comments👍🏻👍🏻🛠
Just just this video so we could change the bulb ourselves thank you keep up the good work..
Thanks for the great comments👍🏻👍🏻🛠
You now are my hero! Exactly the information I needed.
Thanks for the great comments👍🏻👍🏻🛠
So easy with your instructions! Thanks a lot!
Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠
Excellent vid .... checked this out before I even tried to change the bulb so it was a doddle
Thanks for the great comments 👍🏻🛠
Thank you so very much. Took 8 minutes thanks to your excellent video. You rock!
Glad it helped!Thanks for the great comments👍🏻👍🏻🛠
on 2023 your video still helpfull, thank you very much....
Glad it helped! Thanks for the great comments👍🏻👍🏻🛠
Your a star, saved me time and agro
Thanks for the great comments👍🏻👍🏻🛠
What a great video, had a blown bulb, had a look and thought ... How the Hell do you change that. No room what so ever !!!
Found your video and all is explained. Thank you, saved a lot of head scratching.
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
Thank you very much, saved me some head scratching.
You're welcome! Thanks for the great comments👍🏻👍🏻🛠
Cheers buddy, I’ve gotta do mine tomorrow, you’ve saved me a lot of head scratching
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
Hello mate!i wanted to tell you that in case you stopped doing videos like this one you should keep on going!😃😃
This one it really helped me out.Good luck!
Thanks, will do! Thanks for the great comments👍🏻👍🏻🛠
Good man! I thought I was turning mad when I couldn’t pull the dead bulb out. Pliers !!!
Thanks for the great comments👍🏻👍🏻🛠
Aaanton, thank you so much for your tutorial. Super!
Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠
Just made my Sunday. Great video, properly explained with a sense of humour. Fab. Keep it up
Thanks for the great comments👍🏻👍🏻🛠
Where would i be without UA-cam tutorials.
UA-cam is a great place, Thanks for the great comments👍🏻👍🏻🛠
Fantastic, saved me loads of buggering around 👍
Thanks for the great comments👍🏻👍🏻🛠
That has saved me some time, cheers
Thanks for the great comments👍🏻👍🏻🛠
Save me a trip to Halfords thanks... Great video aswell 👏🏻
Thanks for the great comments👍🏻👍🏻🛠
Saved me trawling the Internet or manuals thanks. Although an electric driver is a bit ott 😅 it's only 2 screws! But thanks all the same!
Thanks for the great comments👍🏻👍🏻🛠
Hi, that was a really helpful video, thanks! I've not done mechanical stuff like this before and your video made it super easy (especially the side slide trick!).
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
ty for this... saved me alot of money.
Thanks for the great comments👍🏻👍🏻🛠
Great info. It's easy......when you know how! Thanks.
Glad to help! Thanks for the great comments👍🏻👍🏻🛠
Excellent! saved me all the unnecessary time and undoing of wrong bolts..
Thanks for the great comments 👍🏻👍🏻🛠
Top video. Saves a lot of time and knuckle skin.
Thanks for the great comments👍🏻👍🏻🛠
Brilliant video and really helpful, thank you.
Thanks for the great comments👍🏻👍🏻🛠
thnx,
Saved me a lot of probs
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
Thanks for this, I’ve got to replace my LHD for RHD
Thanks for the great comments👍🏻👍🏻🛠
My job for tomorrow but replace my RHD for LHD :)
Bless you mate. Saved me a potential headache
Thanks Richard for the great comments👍🏻👍🏻🛠
Thanks for this clear instruction. I have to change the complete headlight of a Ducato from 2001 so we will see what tricks we need there. 🤪
Glad it helped, Thanks for the great comments👍🏻👍🏻🛠
Thank you. So helpful.
Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠
Yeah thanks for this, helped me on mine today. Cheers
Thanks for the great comments👍🏻👍🏻🛠
Grazie, proverò a cambiarlo io, adesso sono in Norvegia a Caponord e c’è una nebbia assurda, spero di farcela, saluti 😊
Thanks for the great comments👍🏻👍🏻🛠
Great to know, Good tips always help's.
Thanks for the great comments 👍🏻👍🏻🛠
Great video mate thanks
Glad you enjoyed it Thanks for the great comments👍🏻👍🏻🛠
Thank you for this - I was going carzy!!! - Super!
Thanks for the great comments 👍🏻👍🏻🛠
Thanks for the video!
You're welcome! Thanks for the great comments👍🏻👍🏻🛠
Thanks for that was really helpful
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
Thanks for this clear instruction,
Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠
Thanks. Both sidelights have gone on my relay. Don't want to pay for a simple job if I can avoid it!👍
Thanks for the great comments👍🏻👍🏻🛠
@@aaanton11 A well known retailer wanted £18 to fit the sidelights and the bulbs only cost me £1.98 from euro! Big saving there
Hi, it’s the tips like knowing to move the unit sideways that can save a lot of hassle and swearing. Cheers.
Very true! Thanks for the great comments👍🏻👍🏻🛠
😅Great video, keeping it simple .
Glad you liked it! Thanks for the great comments👍🏻👍🏻🛠
Thanks bud helped a lot!
Thanks for the great comments 👍🏻👍🏻🛠
Hi. Thanks to you,swapped RHD lamps to LHD lamps... Jobs a " Good 'un !! "... ( We BROKE NOTHING.!!Result )
Excellent!, Thanks for the great comments👍🏻👍🏻🛠
Great video...do you have one of opening the engine bay fuse box...2017 Citroen Peugeot boxer?
not yet, Thanks for the great comments👍🏻👍🏻🛠
Excellent. Just what i need to know.
Thank you.
Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠
Would be worth mentioning that this is for Pre 2007 model..helpful tips for those who have one.
Thanks for the great information👍🏻👍🏻🛠
Very helpful 😊
Glad it was helpful! Thanks for the great comments👍🏻👍🏻🛠
Thanks very helpful
Glad it helped Thanks for the great comments👍🏻👍🏻🛠
What a hero I just bought some led bulbs and could I get them in I was getting really angry there like Japanese cars you have to have tiny hands to get in hahah
Thanks for the great comments👍🏻👍🏻🛠
Cheers for that mate 👍👍⭐️
No problem 👍 Thanks for the great comments👍🏻👍🏻🛠
Really helpful video. Is this the same for a 21 plate relay?
Possible Thanks for the great comments👍🏻👍🏻🛠
Thank You very much!!
Thanks for the great comments👍🏻👍🏻🛠
Do you happen to have a guide for the older 2007 Citreon Relay headlights, please? This guide only works for the newer models.
not at the moment, Thanks for the great comments👍🏻👍🏻🛠
Thanks! Really useful video.
You're welcome! Thanks for the great comments👍🏻👍🏻🛠
2003 Ducato: I tried what you said about moving the headlamp to one side but it did not work, mine has a ball and socket fitting which you have to pull straight out, but it is very tight
Thanks for the great information👍🏻👍🏻🛠
Would this be the same for a 2012 Citroen Relay or is this the newer van?
I think this one was newer, Thanks for the great comments👍🏻👍🏻🛠
Brilliant thanks for the video a great help 👍👍👍
Thanks for the great comments👍🏻👍🏻🛠
Thanks a lot great video 👍
Glad you liked it! Thanks for the great comments👍🏻👍🏻🛠
Really thanks for video !
You are welcome!, Thanks for the great comments👍🏻👍🏻🛠
Great video, so helpful, thank you!!
Thanks for the great comments👍🏻👍🏻🛠
Cheers. Easy when you know how
Thanks for the great comments👍🏻👍🏻🛠
Thanks alot !
Thanks for the great comments👍🏻👍🏻🛠
Your a legend thanks 🤩
Thanks for the great comments👍🏻👍🏻🛠
Cheers mate 👍
No problem 👍Thanks for the great comments👍🏻👍🏻🛠
That's sorted mi👍
Thanks for the great comments👍🏻👍🏻🛠
Thank you
You're welcome Thanks for the great comments👍🏻👍🏻🛠
I have watched many of your Aygo/C1/107 videos..... but what I really need help with is how to change the starter motor ??? Any help or advice would be massively helpful... Thanks in advance
The video on replacing the clutch/ gearbox shows the two bolts holding in the starter motor, then it’s just two wires and it’s off👍🏻🛠 you might need to remove the lower bolt from underneath, thanks for the great comments 👍🏻👍🏻
top job cheers for the help
Thanks for the great comments👍🏻👍🏻🛠
Great vid 👍
Thanks for the great comments👍🏻👍🏻🛠
Thanks
No problem Thanks for the great comments👍🏻👍🏻🛠
Thank you!
You're welcome! Thanks for the great comments👍🏻👍🏻🛠
Great job buddy :)))
Thanks for the great comments 👍🏻👍🏻🛠
Thank you ,verry helpfull, like from me
Thanks for the great comments 👍🏻👍🏻🛠
Cheers
Thanks for the great comments👍🏻👍🏻🛠
thanks pal x
Thanks for the great comments 👍🏻👍🏻🛠
Is that a H7 bulb?
yes link is amzn.to/3rR2iST £6.99 for 2 Thanks for the great comments👍🏻👍🏻🛠
Mines the passenger side. What about the other side!! 🤣
Thanks for the great comments👍🏻👍🏻🛠
bing bong
Thanks for the great comments👍🏻👍🏻🛠
Thanks
wow thank you Walter 🤩what a lovely gesture, 👍🏻👍🏻🛠
Thanks
No problem, Thanks for the great comments👍🏻👍🏻🛠