Thanks for checking out the build 🔥 Part 2 out soon Adding all the Scale Parts / Rear bed, Wheels & Interior - Black on Black on Black styling👍👍 Don't miss it Subscribe here bit.ly/3dd4AY4subscribe 😉
1st upgrades or modifications to the trx4m Defender. Patina rust, and body damage goes a long way. heat gun or torch. I subscribed. Will watch and look for durability body tortures test?
Great video - so clear and easy to follow! I'll be doing this conversion on my TRX4 Land Rover body :) Thanks again for this great easy to understand tutorial.
great use of the back door wall to re create the shorter body.)) You get great effect too with can spray paint....i cant ever get that smooth a finnish.
I couldn't as the mesh glue tape that bonds the rear window piece crosses over inside on the side window edges and its so dark you couldn't tell it was clear really to be honest
All good a few of my other defender build videos on the channel show the same way also as I wanted to use different paints on them as the colurs were not available for poly bodys and flat clear under to bond with and so far no probs with cracking or flaking at all I tested pieces of plastic before and bent then and creased them to check and no probs. I dont bash my crawlers but also still use them properly on the trail apart from the usual marks you get with any paint job worked fine for me cheers.
In this video the body is black do you mean the cutting blade to cut the lines? in other videos I use a black pen for the body lines but not this video as its a black body
Thanks for checking out the build 🔥 Part 2 out soon Adding all the Scale Parts / Rear bed, Wheels & Interior - Black on Black on Black styling👍👍 Don't miss it Subscribe here bit.ly/3dd4AY4subscribe 😉
Nice man.
Next you can try a long bed defender..
Just chop of behind the front seat..and put the full roofrack on like some LC 70 have.
Excellent idea and my fav to do would be a 6x6 defender D110 ......one day
1st upgrades or modifications to the trx4m Defender. Patina rust, and body damage goes a long way.
heat gun or torch. I subscribed. Will watch and look for durability body tortures test?
haha ok great thanks 👍
Hey Good day My friend , big like from XpertBoost Gaming, nice videos ! Take care & Wish you a Happy day 😃
Thanks very much my friend 😁👍😁👍
Great video - so clear and easy to follow! I'll be doing this conversion on my TRX4 Land Rover body :)
Thanks again for this great easy to understand tutorial.
Cool thanks very much, I wanted to give it a go and see how it went for a change of look. Good luck with yours 😁👍😁👍
Realy good video my friend . Well done !!😃👍
Thank you! Cheers! much appreciated 👍👍
Excellent Project..!!
Thanks very much💯
great use of the back door wall to re create the shorter body.))
You get great effect too with can spray paint....i cant ever get that smooth a finnish.
Cheers for checking it out 😃👍👍
Great thumbs up! 👍
Thanks very much 😄😄😄
PERFECT!!! Thanks For Sharing!!!
Cheers for checking it out 😀
Downloaded for later. I'm doing this right now :) The Defender body is going on an Axial Wraith Spawn. Thanks for sharing.
Cool sounds good really enjoyed doing that body good luck!
@@rcadventurer Thanks :)
Nice start👍
Thanks very much got a box full of accessories to add next haha cheers matey👍
Good work i wait for next video
Thank you very much my friend 😁👍👍👍
Fantastic work 👌 looks awesome
Thanks very much for that enjoying this build loads of accessories to add half way through 😃👍😃👍
can you make a jeep cherokee build video hardbody
I would love to but working so much atm dont have the time such a pain but thanks for checking out the video :)
Nice job mate, looks sound to fella. 🙂
Thanks for checking it out, good way to use an old messed up body hopefully👍
👍👍👍👌👌👌👏👏👏
Thanks for checking it out 😁👍👍👍👍
What pen did you use to mark out your cuts?
its a Jelly Roll pen off Amazon , I also use it on my Rc tyres to go over the writing on them not permanent but works a treat for both things
You gotta uncover the windows at the top
I couldn't as the mesh glue tape that bonds the rear window piece crosses over inside on the side window edges and its so dark you couldn't tell it was clear really to be honest
Too bad it doesn’t look like a real pick up cab 😔
thanks for checking it out anyway 👍👍
@@rcadventurer yeah amazing job, nonetheless! 👏
@@rodpolice much appreciated
Hows that paint gonna hold out being sprayed on the outside
All good a few of my other defender build videos on the channel show the same way also as I wanted to use different paints on them as the colurs were not available for poly bodys and flat clear under to bond with and so far no probs with cracking or flaking at all I tested pieces of plastic before and bent then and creased them to check and no probs. I dont bash my crawlers but also still use them properly on the trail apart from the usual marks you get with any paint job worked fine for me cheers.
@@rcadventurer thanks
What kind of pen are you using to mark the lines on the body? Cheers
In this video the body is black do you mean the cutting blade to cut the lines? in other videos I use a black pen for the body lines but not this video as its a black body
@@rcadventureroh cool bro, I thought it was a special pen