Dude! I've done powder coating for years and for your first time you've done a great job .... Period! The pit from rubbing the wheel lipid no problem! Just reheat and go over it again. No big deal. Great job. Red lug nuts are fine. No should have waited a little longer to mount the tires. Have patience brother. Your doing great bud. Just need to wait between applications. She's got it down. Good going from A&J Truck and Equipment repair. Deland, Fla. Questions? Give me a call. 😜
Great job on the wheels and the oven mod. A lot of good info about the different obstacles to overcome when powder coating. Overall your rims are absolutely eye popping gorgeous man.
That red is perfect, i think you should put black center caps and white calipers matching with the snow theme of the car if not blue would be good also. Your X look mean now whith those red details.
Good job! Your oven is probably off. Mine is 30 off. People watching, use your temperature gun. Powder will flow out around 370 but you will have no way of knowing the actual part temp. You can over bake your finish if the temperature is too hot. I didn't lower my temp on a wrinkle finish to 400. I ended up baking the part for 20 mins at 450 which was actually 480 because my oven is off. It made a satin black finish when it was supposed to be wrinkle black! So, I got to strip the part and do my prep again. Just a little advice for beginners.
Don't go by time in the oven to hot coat, go by part temp. I find that 100 degrees works well for me. Also if you will sink an actual "earth ground" rod in the ground to attach to your part you will see a big change in the coating. Most shop and house grounds are hardly adequate to stop a fire. also, build a wheel holder so you can coat all sides. I used a few steel plates and some allthread rod. Wheels look awesome! great job!
The red wheels look fantastic. I would suggest black lug nuts and powder coating the brake callipers yellow with the black Brembo stickers. You should also get a front splitter to match the side and rear splitters.
Use the infrared on the black area of the barrel to test the temp, because infrared temp guns don't work on reflective surfaces and you are trying to get the temp of chrome.... won't work.
Chrome calipers will give you the black look from a distance but will be wicked up close, going from black to the red on your wheels. Btw great job with the oven, you are a DIY hero
nice i actually did this same color process using their powders on a valve cover a few months ago but added a metallic clear for even more pop love it man
Only thing as someone with some experience in spraying powder coating (tons of wheels included) that I would have added- clear coat! It adds more sheen and highlights that 2 stage pass thru color combo. It also adds a lot of protection with them being possible contact with road debris.
Leave the red centers and lug nuts and do the calipers white. That would look sick AF!! the red looks badass for sure, and a white caliper behind it would be the perfect touch!!
Merigold brake calipers.Chrome with black center caps.And I know it sounds like alot of work again. But chrome red lip and the spokes will be black. Great job on your DIY videos.Ive been learning alot.🤘🤘🤘🤙
White calipers black Brembo writing maybe behind the red think itll look dope. Not sure how much brake dust you have but it will look good with the whole color scheme you have going on.
The issue you are having with the powder sticking is due to the layers of powder coat. If you had the dual voltage gun. You put it on its higher setting and it'll work better. Also helps to have an actual ground hooked to the piece that is ran to the ground.
Sat and watched this vid this morning and this guy deserves all respect for tackling such a job. End finish was brilliant . I sse a couple of the usual jealous comments. Sad .
@@flexxin_daily5127 just make sure you use the clear recomanded by prismatic because any other might alter the look of the chrome also make sure chrome is fully baked before aplying clearcoat.
Funny watching u have the same problems I had when powder coating rims at home. The more paint that’s on the rim the longer it takes to get to temperature,with the rim being powder coated b4 and then again it takes awhile to heat up in our garage ovens.i actually made a false door for the front of my stove because 19” and up I wasn’t able to shut the door.And the problem with paint not sticking I found that if I wire brushed or sanded the spot where you put your clip the powder stuck a lil better as long as the rim was warm .I found the same as you, too hot and powder would start flowing on the rim immediately to cool and it won’t stick.I started coating when the rim was about 120-140 degrees and that worked better.Learning as I go but had all the problems you had and then sum,try 2 tone on a rim and taping it all off with hi temp tape and have a bubble or lint screw it all up! Sucks spending hours to redo.Parasmatic powder is the shit thats the same place I order from.Anyway rims turned out sweet there illusion two step creates some sick colors keep it up. B
I didn’t see anywhere in the comments what size the rims were? I’ve got a set of 20” x 9” rims and a Eastwood fun coming soon. Just wondering if I could fit a rim that big in an oven. Beautiful car man. And prismatic is the place I’m going to get my next powders!!! Great job in the rims
This is the first time I am viewing this person's youtube channel.I have never seen this channel before this interesting video. As a first time viewer I wish desperately this so interesting person would just slow down a lot when he talks and explains processes etc.. I am a native born upstate New York and I can barely follow what he is saying . I feel bad for anyone who isn't a native English speaking person as they would be totally lost. This person is bursting with super experience , knowledge ability but please slow the roll.
You should look into their illusion series of powders, good stuff. It does the same.as this with just a base and a clear. The base sprays on a silvery color like silvery red. When it wets out it turns chrome. Then you spray on the clear top coat. When the clear wets out it pulls the color our. There is less effort trying to get an even coat of candy. It is very forgiving. I did an ar15 in their illusion purple. Video on my channel of the rifle.
Good job. I started with the Eastwood gun as well... It was hard to do two coat powdercoat without spraying the part while it's hot. I endup buying a high quality gun from China... Ben using it for about 3 years now... I can do up to 4 coats... I recommend that you buy one if you will work with powder coat
thumps up for trying my dude...But for next time. you need a good ground if you want the powder to stick. I recommend you drill a 1/2 inch hole into the ground about a 1/2 a foot. you'll get a good ground.
Personally as I'm a professional powder coated I would do white brakes however. Any car parts I would send to a powdercoating workshop to get perfect powder coverage and finish. Nice DIY job mate. Prismatic do have 1000s of colours you was correct, also Tiger Drylac are very good suppliers. Look into Nordson Powder coating machine if your going to be doing more work. Check our page on Instagram Baleariccoatingsolutions
The wheels are sorta growing on me, must admit initially you freaked me out, but it sort of suits the EVO10, I might have done 3 spokes on each wheel not to over do the Red, she’s turned out pretty sic, it’s definitely a head turner 🤙
The red looks good. Much better than the black. I think black wheels always look terrible. I really liked the chrome finish and it could have looked really good too.
I definitely love the red color!! I think I would definitely go with black lug nuts though for sure!! I would also definitely be powder coat the calipers for sure!! But I would go the black color probably since you think there is to much red!! Awesome job!! I would definitely like to see a nice close up shot of the hole wheels!! Awesome video buddy!!
About the comment of running the plain chrome. I’ve always thought of the idea of having 4 rims with 2 separate colors. Then you do, in this case, red on the front and chrome on the back for one side and then on the on the other side, you run the same but red would be on the back.
How do you powder coat the parts of the rim that are touching the oven pan? Even if you rotate the rims, a part that needs to get coated is still touching
I bought my wheels candy apple red, looks like the same color, but my back wheels look like they are faded or they just didn’t get the color on heavy enough. I was wondering if I could clean my wheels and powder coat them over the finish without any other prepping.
ceramic tip, when you put some on the applicator, you need to close off the ceramic, you want as little exposing to air as possible or it will crystalize in the jar
White calipers would really compliment the red rims with the black lug nuts, and would still match with the red, black and white colour scheme of the car... That's just my opinion
“Now it looks like a new oven” mmmm 😂 Nice alloys, nice car, nice sound, nice gal, living the dream.Think I need to move across the pond. Interesting vid too, love your make do but its going to happen anyway attitude. 👍👏
Those wheels look so sick. Good job bro. I wish I had all the equipment and a big garage to do work on my car haha. I have a Misano Red Audi S4 B8.5 though so id have to go a different colour 😅
Dude! I've done powder coating for years and for your first time you've done a great job .... Period! The pit from rubbing the wheel lipid no problem! Just reheat and go over it again.
No big deal. Great job. Red lug nuts are fine.
No should have waited a little longer to mount the tires.
Have patience brother. Your doing great bud. Just need to wait between applications. She's got it down.
Good going from A&J Truck and Equipment repair. Deland, Fla.
Questions? Give me a call. 😜
Teach me please 🙏
Great job on the wheels and the oven mod. A lot of good info about the different obstacles to overcome when powder coating. Overall your rims are absolutely eye popping gorgeous man.
I wasn't convinced on the color choice until they were installed... I think it was a good move. Way better than previous black! Nice work!!
For his setup... I give it a 100!! Guys like this is the friends you should have when your a real guy. Nice work 🏆
That red is perfect, i think you should put black center caps and white calipers matching with the snow theme of the car if not blue would be good also. Your X look mean now whith those red details.
Good job! Your oven is probably off. Mine is 30 off. People watching, use your temperature gun. Powder will flow out around 370 but you will have no way of knowing the actual part temp. You can over bake your finish if the temperature is too hot. I didn't lower my temp on a wrinkle finish to 400. I ended up baking the part for 20 mins at 450 which was actually 480 because my oven is off. It made a satin black finish when it was supposed to be wrinkle black! So, I got to strip the part and do my prep again. Just a little advice for beginners.
Don't go by time in the oven to hot coat, go by part temp. I find that 100 degrees works well for me. Also if you will sink an actual "earth ground" rod in the ground to attach to your part you will see a big change in the coating. Most shop and house grounds are hardly adequate to stop a fire.
also, build a wheel holder so you can coat all sides. I used a few steel plates and some allthread rod.
Wheels look awesome! great job!
Respect ✊ for how much you are able to do by yourself mate 👍🏻
I used lollypop red on my valve covers and air cleaner. They look awesome! LP red pushes it over the edge! Great choice - looks awesome!
What edge is it pushed over?
Black lug nuts, black center caps and white Brembos
Omg looks so good 🤤😍, I’d do grey callipers and like you said black lug nuts just to match the wrap and give it contrast
100% I do the same why
The red wheels look fantastic. I would suggest black lug nuts and powder coating the brake callipers yellow with the black Brembo stickers. You should also get a front splitter to match the side and rear splitters.
Use the infrared on the black area of the barrel to test the temp, because infrared temp guns don't work on reflective surfaces and you are trying to get the temp of chrome.... won't work.
White calipers bro😍Love the Red wheels man 👊🏾
NOOOOOooooo, they stain and in 1 mile they're covered in brake dust.
Yep. I was thinking that too. Yeah, they will get dirty, but you wont see fine layers until it gets real dirty. You can easily wipe them off
@@maker000 not true, if properly coated and gloss cleared
Chrome calipers will give you the black look from a distance but will be wicked up close, going from black to the red on your wheels. Btw great job with the oven, you are a DIY hero
nice i actually did this same color process using their powders on a valve cover a few months ago but added a metallic clear for even more pop love it man
Only thing as someone with some experience in spraying powder coating (tons of wheels included) that I would have added- clear coat! It adds more sheen and highlights that 2 stage pass thru color combo. It also adds a lot of protection with them being possible contact with road debris.
Oh, and check out American Powder Coating next time your color shopping- lot of options, and much cheaper than prismatic
Yellow callipers ... neon, fluo ! Risky but I think it would make that brake and still get good in whole picture....
You and your bro make the best moto/auto videos on youtube.
Dustin and Devin? Hell yeah favorite youtubers out there 🤙🏼. You guys have the sickest content!
Daniel Rivera i agree!! 🤙🏼
Totally agree bro!
Wow! That's a superb finish! I powder coat alloys all the time and nowhere near the quality and color ranges of these
Saw you driving this morning on 395 and the red wheels surprised me 😍
Leave the red centers and lug nuts and do the calipers white. That would look sick AF!! the red looks badass for sure, and a white caliper behind it would be the perfect touch!!
Crome clippers. Would loud loads man
Merigold brake calipers.Chrome with black center caps.And I know it sounds like alot of work again.
But chrome red lip and the spokes will be black.
Great job on your DIY videos.Ive been learning alot.🤘🤘🤘🤙
White calipers black Brembo writing maybe behind the red think itll look dope. Not sure how much brake dust you have but it will look good with the whole color scheme you have going on.
The issue you are having with the powder sticking is due to the layers of powder coat. If you had the dual voltage gun. You put it on its higher setting and it'll work better. Also helps to have an actual ground hooked to the piece that is ran to the ground.
white lug knots will do freaking awesome and will match well with your car
All your work paid off. Coating looks great!
You still have a lot to learn out the powder coating process. Your enthusiasm is admirable lol rock on
Devin, I legit look forward to your new vids. My favorite UA-camr by far. Keep it up!
The wheels turned out so good! Love that red!
Turned out great. You need contrast black caps, lugs, rotors.
Sat and watched this vid this morning and this guy deserves all respect for tackling such a job. End finish was brilliant . I sse a couple of the usual jealous comments. Sad .
White calipers, trust me, it's going to look dope ! it will be hard to keep them clean but will do great on your white base color car.
so sick ! would love to see the calipers white with red lettering
for your information super chrome on it's own is not UV resistant, it'll turn dark green after a month or 2 if you use only super chrome.
what if you powder coat a clear coat onto them?
@@flexxin_daily5127 just make sure you use the clear recomanded by prismatic because any other might alter the look of the chrome also make sure chrome is fully baked before aplying clearcoat.
Funny watching u have the same problems I had when powder coating rims at home. The more paint that’s on the rim the longer it takes to get to temperature,with the rim being powder coated b4 and then again it takes awhile to heat up in our garage ovens.i actually made a false door for the front of my stove because 19” and up I wasn’t able to shut the door.And the problem with paint not sticking I found that if I wire brushed or sanded the spot where you put your clip the powder stuck a lil better as long as the rim was warm .I found the same as you, too hot and powder would start flowing on the rim immediately to cool and it won’t stick.I started coating when the rim was about 120-140 degrees and that worked better.Learning as I go but had all the problems you had and then sum,try 2 tone on a rim and taping it all off with hi temp tape and have a bubble or lint screw it all up! Sucks spending hours to redo.Parasmatic powder is the shit thats the same place I order from.Anyway rims turned out sweet there illusion two step creates some sick colors keep it up.
B
Awesome job, I want to try and do my wheels in black chrome. Powder coating is way more durable than spray paint.
I didn’t see anywhere in the comments what size the rims were? I’ve got a set of 20” x 9” rims and a Eastwood fun coming soon. Just wondering if I could fit a rim that big in an oven. Beautiful car man. And prismatic is the place I’m going to get my next powders!!! Great job in the rims
Damn
Thats a legit oven. 😀
DORMlN lol for real
This is the first time I am viewing this person's youtube channel.I have never seen this channel before this interesting video. As a first time viewer I wish desperately this so interesting person would just slow down a lot when he talks and explains processes etc.. I am a native born upstate New York and I can barely follow what he is saying . I feel bad for anyone who isn't a native English speaking person as they would be totally lost. This person is bursting with super experience , knowledge ability but please slow the roll.
You should look into their illusion series of powders, good stuff. It does the same.as this with just a base and a clear. The base sprays on a silvery color like silvery red. When it wets out it turns chrome. Then you spray on the clear top coat. When the clear wets out it pulls the color our. There is less effort trying to get an even coat of candy. It is very forgiving. I did an ar15 in their illusion purple. Video on my channel of the rifle.
The all RED looks amazing, I now want to do that to my charger rims.
Good job. I started with the Eastwood gun as well... It was hard to do two coat powdercoat without spraying the part while it's hot. I endup buying a high quality gun from China... Ben using it for about 3 years now... I can do up to 4 coats... I recommend that you buy one if you will work with powder coat
Looks great. Since you can, you should put two blue ones o. The other side, so when you look at them from one side they are different
Great job on the wheels! Looks amazing!
Keep it full red!
Damn they look sick !!! I think if you go with grey ! Or Silver Calipers it would look pretty clean
Devin the gram lights look sick just one question do they rub? and if they do, What did you do for them not to rub?
Me - mum can I use the oven
Mum- Y IS THE FREAKN CAR WHEEL IN THE OVEN
Lol so tru.., be like there cookie cutterz while smoking a joint
Go graphite grey for the brake calipers with red lettering and black outline it will look 🔥!
Friggn Unreal.
100.00 powder coating system and that 1840’s oven. You are the friggn Man.
Your powder coating skills are getting better and better. Red wheels look great!
"YES " , Pure Chrome Looks Excellent . EYE Catching .
thumps up for trying my dude...But for next time. you need a good ground if you want the powder to stick. I recommend you drill a 1/2 inch hole into the ground about a 1/2 a foot. you'll get a good ground.
Have a similar colour on my Golf Gti Mk1. Looks mint on the Evo!
I’d try duplicating the camo on the calipers,it no doubt be time consuming an a hard feat to tackle but well worth the end result.
How did it turn out?
@@alexhaugen7530 no
@@dantsy6397 what?
what do you mean how did it turn out?
Nice ! But the calibers would look dope either white , silver , or even yellow.
Devin is the DIY god of cars! Evo looks hella sick! 🔥
Personally as I'm a professional powder coated I would do white brakes however. Any car parts I would send to a powdercoating workshop to get perfect powder coverage and finish. Nice DIY job mate.
Prismatic do have 1000s of colours you was correct, also Tiger Drylac are very good suppliers.
Look into Nordson Powder coating machine if your going to be doing more work.
Check our page on Instagram Baleariccoatingsolutions
Your videos are actually so interesting
The Red (lollipop) wheels LOOK SICK😎👍🏻👍🏻.
Black Lugs and center caps. Red wheels look dope!
The wheels are sorta growing on me, must admit initially you freaked me out, but it sort of suits the EVO10, I might have done 3 spokes on each wheel not to over do the Red, she’s turned out pretty sic, it’s definitely a head turner 🤙
Pick one of the greys in the camo wrap to paint the calipers and with the lug nuts being black that would look perfect
Go white calipers, white lugs and white center cap, yes it’s a lot of white but it’ll match the lot of white on your car
Honey what's for dinner?
I'm cooking wheel, it will be done in 15 minutes.
That oven is like aahhh maaan I thought people gonna make cookies and steak in me not wheels 😩😂
That is a great job, respect man.
The red looks good. Much better than the black. I think black wheels always look terrible.
I really liked the chrome finish and it could have looked really good too.
I definitely love the red color!! I think I would definitely go with black lug nuts though for sure!! I would also definitely be powder coat the calipers for sure!! But I would go the black color probably since you think there is to much red!! Awesome job!! I would definitely like to see a nice close up shot of the hole wheels!! Awesome video buddy!!
Looks amazing. Think you should make the calibers black.
The Niemela brothers have some of the most cleanest content on UA-cam!
Hope your brake discs don’t over heat as they use the bare metal contact between the alloy and disc to dissipate heat to cool brakes. Nice diy tho 👍🏼
About the comment of running the plain chrome. I’ve always thought of the idea of having 4 rims with 2 separate colors. Then you do, in this case, red on the front and chrome on the back for one side and then on the on the other side, you run the same but red would be on the back.
Wheels look sick! I need to do mine. Maybe gray (anthracite) color for the calipers.
For being sick, she still looks awesome! As for car, uhh yeah looks awright
Close to 150k already👀 I’ve been here since about 6k and have enjoyed every video since!
First time watching this guy, and let me tell you, he is all about business. He’s got dough.
Devin you are something else.
You can do black lug nuts and centre caps, white calipers with black logos👌
How do you powder coat the parts of the rim that are touching the oven pan? Even if you rotate the rims, a part that needs to get coated is still touching
We're literally cooking our wheels now😂
I bought my wheels candy apple red, looks like the same color, but my back wheels look like they are faded or they just didn’t get the color on heavy enough.
I was wondering if I could clean my wheels and powder coat them over the finish without any other prepping.
Bro, that looks ef'ing sick ! Great job :) Love it ! The whole car actually :)
ceramic tip, when you put some on the applicator, you need to close off the ceramic, you want as little exposing to air as possible or it will crystalize in the jar
oh my god! dont touch this evo exterior any more, now its perfect!! Looking sooo siiiick, final form of evo.
Looks sick man, I think white calipers would really pop.
Great job, looks amazing, now quarantine yourselves!!
White Calipers would look sick!
Try white Chrome for the lug nuts I mean black is good but since you are highlighting red and white I would go with a white chrome.
looks amazing please can you tell me what colours and codes you used thanks
Prismatic it the go to for sure!
White calipers would really compliment the red rims with the black lug nuts, and would still match with the red, black and white colour scheme of the car... That's just my opinion
Definitely white or grey calipers. You absolutely killed it though
“Now it looks like a new oven” mmmm 😂 Nice alloys, nice car, nice sound, nice gal, living the dream.Think I need to move across the pond. Interesting vid too, love your make do but its going to happen anyway attitude. 👍👏
You have to use special over an powder for rims, because regular powercoating temps will make rims BRITTLE.
Those wheels look so sick. Good job bro. I wish I had all the equipment and a big garage to do work on my car haha. I have a Misano Red Audi S4 B8.5 though so id have to go a different colour 😅
The red looks rad
Awesome job. Great inspiration for the evo x I'm restoring
When using metallics or Chrome's you should shoot a durable clear powder for oxidation
Some silver or some shade of dark silver calipers would probably look good if you dont want to do black.