What should I do to this quad? Suggestions are wanted! I blurred out parts of the quad because the previous owner installed custom made brackets and panels that had bad sign on them. Please try to ignore them. They will be covered up and replaced next video. IDK why the previous owner would put those on his quad. Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot! Check out my Instagram: 2_vintage_ Thank you for all the support!
You know the hubs for those holeshot tires was with the parts that came with it just wanted to make sure u were aware of it, love ur videos man there always fire cant wait to see the next one. I think u should put a rear shock in and put the hole shots on it and smaller sprocket but don't put the wheelie bar on it cause u couldn't go through trails if you wanted to. I think it dont need it it's not going to help just get in the way. Cant wait for next video of this man this is Steve from New Jersey saying you rock bro keep making bangers man later my dude.
Make into a regular banshee man and put a regular banshee motor in it get rid of the crappy swing arm and make it stock and then sell it for 4k$ banshees go for stupid cash
Those exhaust tips are just to get all the noise behind you I'm sure. You're a really smart guy and I'm sure you can do a few improvements on it. Thanks again for your time and videos.
hey i'm big into snowmobiles just wanted to provide some insight here, a twin piped 600 should be spinning at about 9000-9500 rpm it sounds like maybe 7500 if that currently your probably losing about 15-20hp lol, swingarm has been extended to extend the wheel base obviously so it doesn't wheelie i wouldn't even think about shortening it. the reason it was breaking lose was probably because it has no rear suspension usually when you have rear shocks they will turn that acceleration force into compression but since there's nothing there to take it up it just breaks lose. they may have taken the shock out because it did not fit with that engine in there keep that in mind. probably doesn't help your on mud lights on the road too lol as for the clutching thing i would give bmp, speedwerx, or give the maker of the pipes a call explain your set up to them and get them to send you weights for the primary good luck👍🤙
How many times do you think you will burn yourself on the exhaust pipes getting on/off ?🤪 Need to find a looooong strip with some lose dirt or sand to test that baby out for sure. Look forward to seeing more videos on this banshmobile. 😃
Love the laeger sticker, it’s completely badass set aside from the rfy shocks. They’re super cheap eBay suspension that snaps. I wouldn’t trust them at all man, for your safety try and find some stock suspension or works
The symbol being blurred is a German Cross. Closely related to the maltese cross wich is used in many different things including firefighting and medical
Thats because people elsewhere in the world actually value things they put this much time and money in to... you dont see stuff like this for sale often, even in the US (im not from the us), you gotta be looking at the right time. Usually when people build stuff like this it stays with the person who built it until they run out of money and are forced to sell, the machine is no longer useable to that person or they get older and dont find that style of machine suitable for thier needs any more. The main reason you (we) think its common place is because thats what the internet exposes us to when in reality they are far and few between. Take car vlogs for example, best parts, top hp, finished build in a couple months when in reality for anyone whos not an "influencer" those builds would take the better part of a couple years.
@@YeeThirty I agree with yea bud I'm my state we got stuff like that but you dont see them for sale in till a certain time or season sametime every year.
Beautiful machine the guy did a good job building it only downside since he didn’t use rubber to mount the engine That machine will vibrate like crazy until one day those engine mounts fail from cracking at the welds..stay safe on that beautiful death trap lol
Hey man! New subscriber, also fellow Wisconsinite, a good buddy of mine actually owns this! Its local to me, told me he bought it from you, pretty badass machine
That’s badass. I’m working on a skidoo 617 on a Polaris trail boss frame right now and I’m running into an issue with getting the pipes in a good spot. It’s definitely a bit of a challenge with dual exhausts
I'm thinking of making a dead trap or of a sportsman frame that I have laying around probably going to be a 670 rotax but the clearance for the pipe is just insane because of the expansion chamber can I put it after a longer tubing from the headers? I know I cannot get rid of it and I will probably turn the exhaust down so it's easier to work with
THATS WHAT THE OTHER RED PLUS SIGN LOOKING THINGS ARE FOR, CHANGES THE WHEEL BOLT PATTERN. AWESOME VIDEO AND WHAT A GREAT FIND BRO. BE SAFE MY FRIEND :)
I tend to comment as I watch but I think you already knew this because you mentioned something about forgetting to bring something lol So I think I spoke a bit to soon on my comment. Your videos are awesome my Friend and I appreciate your time spent making them (especially the editing and uploading) You make frequent vids and They are always great. Thank you and be safe :)
man i absolutely love that thing. that is worth hanging onto. It hardly needs anything, i would put some drag tires on it and take it to your closest local drag strip and see what it can do, with the clutch and swingarm thats on it, it is basically useless off road, at least as it sits now. awesome find man, awesome machine. The fellas that put it together knew what they were doing. you got an insanely good deal. i would get the tach working too
It’s a drag quad and as far as the fastest you should prob go to some quad drags there’s always banshees and there all same sled motores stretched low bars it’s a straight drag sled and looks like it’s been in some races I found a few vids with this quad I’m assuming by the guy you got it from
Oh yeah and the iron cross has ABSOLUTELY NOTHING to do with racism. Google it, It was a metal that was awarded for bravery in a battle and other military contribution in a battlefield environment. Black people started saying it's a racist thing because you generally saw the iron cross worn by a ss German solder in WW2, also known as Nazis. But because nowadays they'd rather associate the word Nazi as the KKK or other racist organizations and would rather spread bad information to make white people look like we're the racists instead of learning the history. Iron crosses are also awarded to Americans so what your gonna call every solder who was ever given an award for bravery a racist for fighting for your freedom. Don't take that shit off man it's a badge of bravery for getting on the thing
Please no shock. That defeats the purpose of a drag build. The rear will just squat instead of getting the power to the ground. Its not built to go off roading.
It’s been a year since u posted that but Jesus that might pretty dumb it NEEDS shocks in the rear they just need TUNED correctly an it would be faster then it is now
Jesus joe this thing is mental great build though it defo has the careful with me or you die scenario right enough lol I think put shock on it with smaller wheels and some minor improvements and it will defo be badass awesome video man stay safe mate 👍👌🔧🔧🔧
I definitely think you should make a different bracket for a shock it could help with the rear end not being so stable with that bar and a shock should be much better..
Look up Planet Sands before you do anything to it !!! The build is for drag only ,and has had time and money put into it. You can't just go back to stock at this point either drag it or find someone that will or does. Do some research on your next purchase cause you have no clue what you've done got into!!!!!!!
There called snomo if you follow dirt drags you'll see alot of them .there was just a big race in Ohio this weekend. Last time I was there there was a 3wheeler with a triple an a 100 shot of nitrous. 300ft in 3sec
i have a banshee that has a 1988 Polaris Indy 650 motor i'm rebuilding at the moment love yours i'm trying to find out were to get the exhaust cans like you have if you know please respond love the channel keep it up
Ikr....its hillarious that Joe wants to put a shock on it and take it "off roading". 🙄 Why buy a drag bike. Its bad-a$$ tho. More power to you Joe. Just don't kill yourself.
Maybe its meant to be a hill climber? Back swing arm is waay to long to drive comfortable. the suspension needs experimentation. Engine is ready for anything though. Guy might be able to down swing the pipes or at the very least wrap them in some heat insulating rope. Take it to a muffler shop and see if they can build a exhaust system that goes down instead of up. Still use the expansion chambers but put a tight bend on it down instead of up
Definitely not for hills. The engine is mounted solid and the mounts would snap. No rear suspension wouldn’t be good for hills either. Those front shocks wouldn’t be able to hold up to the abuse either, I have those exact shocks on my mini bike lol
@@bigrob6076 You dont know the name of it or you would have said it. So I looked it up for both of us. LEDAUT 2" x 50' Titanium Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape
Hey 2 vintage I got a question I got a 2007 trx 450r and the coolant is boiling or it sounds like it’s bubbling when I ride it hard do you know what can cause that? Btw love your channel👍
It's hot. Make sure your rad is in good shape and your water pump is working proper. Go over the whole cooling system as maintenance. Fresh coolant etc.
Feel like the long swing arm setup would be good maybe on a dirt track drag race setup. Or you probably need some drag slicks on it and take it to the track!
Without rear suspension, you'll never be able to get the rear end to hook up. Maybe there's something you can do about the huge clutch cover, too? As you sit on the machine, you'd never be able to get off the machine quickly! Looking forward to seeing what you do to the screaming Banshee next 👍🇺🇸
Totally not true I build 30hp motorized bicycles that are 100% rigid from the front end to the rear with 3 inch wide tires weighing a total of 100lbs and I can get my stuff to hook up. It's ALL ABOUT the gearing. He's running a huge rear sprocket which is already gonna throw alot of torque to the gear and then he's got a HUGE torque converter on it which triples the torque. If he gets a smaller sprocket dropping like 10-15 teeth he'll start to notice a huge difference in traction he'll also gain top end speed. Then he can dial that in how he likes it
What should I do to this quad? Suggestions are wanted! I blurred out parts of the quad because the previous owner installed custom made brackets and panels that had bad sign on them. Please try to ignore them. They will be covered up and replaced next video. IDK why the previous owner would put those on his quad.
Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot!
Check out my Instagram: 2_vintage_
Thank you for all the support!
You should race this and the 100hp Yamaha Banshee
You know the hubs for those holeshot tires was with the parts that came with it just wanted to make sure u were aware of it, love ur videos man there always fire cant wait to see the next one. I think u should put a rear shock in and put the hole shots on it and smaller sprocket but don't put the wheelie bar on it cause u couldn't go through trails if you wanted to. I think it dont need it it's not going to help just get in the way. Cant wait for next video of this man this is Steve from New Jersey saying you rock bro keep making bangers man later my dude.
@@lastoppertunity333 Yeah i saw that those extra hubs were for those. I am probably going to put a shock in the back and smaller tires. Thanks man!
Make into a regular banshee man and put a regular banshee motor in it get rid of the crappy swing arm and make it stock and then sell it for 4k$ banshees go for stupid cash
Put a stock banshee rear control arm on it with a widened Axle
The smaller wheels are gonna make that huge rear sprocket very close to the ground
@@hunterharrison3539 like ooohhhhh your worst than my drunken mom at 11 30 at night making no sense
Those exhaust tips are just to get all the noise behind you I'm sure. You're a really smart guy and I'm sure you can do a few improvements on it. Thanks again for your time and videos.
A good video would
Be this banshee vs the one with the sport bike motor
I Iive in Wisconsin as well seen that on market place it’s cool that you bought it
@@benny8300 what did he spoil?
@@benny8300 ?
@@benny8300 what did he spoil?
@@benny8300 what did he spoil?
@@benny8300 what’s spoiled bud
hey i'm big into snowmobiles just wanted to provide some insight here, a twin piped 600 should be spinning at about 9000-9500 rpm it sounds like maybe 7500 if that currently your probably losing about 15-20hp lol, swingarm has been extended to extend the wheel base obviously so it doesn't wheelie i wouldn't even think about shortening it. the reason it was breaking lose was probably because it has no rear suspension usually when you have rear shocks they will turn that acceleration force into compression but since there's nothing there to take it up it just breaks lose. they may have taken the shock out because it did not fit with that engine in there keep that in mind. probably doesn't help your on mud lights on the road too lol as for the clutching thing i would give bmp, speedwerx, or give the maker of the pipes a call explain your set up to them and get them to send you weights for the primary good luck👍🤙
Looks like a Tweeker gone wild project.
Ive seen even tweakers make a better pipe design than that!
I know some tweakers and it would never make it that far you can trade that thing for a lot of meth lol
Sounds like something a tweaker would say
@@phoenixarizona8441 make whatever assumption you want 🙄. You look like Tracie Lords XXX.
Trust me it is I’ve had my share of “meth” induced highs
How many times do you think you will burn yourself on the exhaust pipes getting on/off ?🤪
Need to find a looooong strip with some lose dirt or sand to test that baby out for sure.
Look forward to seeing more videos on this banshmobile. 😃
Love the laeger sticker, it’s completely badass set aside from the rfy shocks. They’re super cheap eBay suspension that snaps. I wouldn’t trust them at all man, for your safety try and find some stock suspension or works
Also the swastika near the left foot peg isn’t very cool
No way 110hp get it to kaplan cycles for a true dyno result no pie in the sky bullshit
I bet it’s close to that. Most 600cc+ sleds are over 100hp.
It’s prob 90 to 100 hp because most snowmobile engines over 600cc are that
@@mattsfishingadventures363 it has twin pipes as well im sure its 110 hp or maybe even more
Hands down baddest custom quad on the channel! Love that 2 stroke sound
The symbol being blurred is a German Cross. Closely related to the maltese cross wich is used in many different things including firefighting and medical
thank you i did not know what i meant
Theres one in middle of handlebars too
#El champa
Same
@@TaylorNottz also near the left foot peg
Another Sunday Funday of 2vintage and Mustie. Thanks for the upload friend
Just got done with Mustie’s new scout video, now on to Joe’s!
Wow this is typical usa here in europe i never see those crazy builds😂 would be cool if i found one to make a serie on it
Here i have seen in northern europe
Thats because people elsewhere in the world actually value things they put this much time and money in to... you dont see stuff like this for sale often, even in the US (im not from the us), you gotta be looking at the right time. Usually when people build stuff like this it stays with the person who built it until they run out of money and are forced to sell, the machine is no longer useable to that person or they get older and dont find that style of machine suitable for thier needs any more.
The main reason you (we) think its common place is because thats what the internet exposes us to when in reality they are far and few between. Take car vlogs for example, best parts, top hp, finished build in a couple months when in reality for anyone whos not an "influencer" those builds would take the better part of a couple years.
@@YeeThirty I agree with yea bud I'm my state we got stuff like that but you dont see them for sale in till a certain time or season sametime every year.
In Poland somethings people engine swap Chinese quads with sport bike engines like 600cc or 1000cc
@@juliankam5079 wtf 😂 they’re crazy I don’t even know if those frames can handle that power
Take this to the track brother you could realy hurt some feelings with this thing💪🏻💪🏻💪🏻
Oh wow 😯 I bet that will give you an adrenaline rush 👍🏻
Beautiful machine the guy did a good job building it only downside since he didn’t use rubber to mount the engine That machine will vibrate like crazy until one day those engine mounts fail from cracking at the welds..stay safe on that beautiful death trap lol
The other downside is the swastika near the left foot peg :/
@@knobchocolate6491 where like time stamp
@@xen1568 23:44
These banshees you are getting are just getting crazier and crazier🤣💯 you and Chuck need to race this vs the other engine swapped banshee you have
It's a nice quad, awesome video man can't wait to see the top speed test
Pretty dope bike first automatic banshee I’ve ever seen
Congrats on 200k subscribers Joe!
I saw the exact same thing on marketplace and didn’t realize you live in Wisconsin! Small word man. Glad I found your channel, keep up the great work.
“ im going to take it easy” proceeds to go crazy😂😂
It doesn’t have gears🤦♂️
@@isaacfinneyoutdoors411 ohh thought it would
Torque converter mate... (CVT transmission)
Sick bike man! Love these custom banshee frame jobs.
Just enough gas for a pass is Whats she's meant for haha or maybee a couple man love it. Definatly love your finds
That bike is sick af.... man ol man🙏🙏
🙌🙌 Great find ..... Stay Blessed and Less Distressed 💯🤙
Hey man! New subscriber, also fellow Wisconsinite, a good buddy of mine actually owns this! Its local to me, told me he bought it from you, pretty badass machine
The swing arm is supposed to be like that on a drag quad
That’s badass. I’m working on a skidoo 617 on a Polaris trail boss frame right now and I’m running into an issue with getting the pipes in a good spot. It’s definitely a bit of a challenge with dual exhausts
I'm thinking of making a dead trap or of a sportsman frame that I have laying around probably going to be a 670 rotax but the clearance for the pipe is just insane because of the expansion chamber can I put it after a longer tubing from the headers? I know I cannot get rid of it and I will probably turn the exhaust down so it's easier to work with
THATS WHAT THE OTHER RED PLUS SIGN LOOKING THINGS ARE FOR, CHANGES THE WHEEL BOLT PATTERN. AWESOME VIDEO AND WHAT A GREAT FIND BRO. BE SAFE MY FRIEND :)
I tend to comment as I watch but I think you already knew this because you mentioned something about forgetting to bring something lol So I think I spoke a bit to soon on my comment. Your videos are awesome my Friend and I appreciate your time spent making them (especially the editing and uploading) You make frequent vids and They are always great. Thank you and be safe :)
Oh and love the big sprocket
Also drag quads sometimes have even longer swing arms but like you said they are only going straight.
Bro, really? Looks awesome. Looking forward to it.
man i absolutely love that thing. that is worth hanging onto. It hardly needs anything, i would put some drag tires on it and take it to your closest local drag strip and see what it can do, with the clutch and swingarm thats on it, it is basically useless off road, at least as it sits now.
awesome find man, awesome machine. The fellas that put it together knew what they were doing. you got an insanely good deal.
i would get the tach working too
Time to install slicks on the rear and head to your local runway for a top speed run :D
Have you thought about exhaust wrap for it?
What a nice looking death trap!
Yeah it is a death trap for sure!
But nice one though lol
Why is the front thing blurred?
It’s a iron cross which is a symbol the nazis used in ww2, (There is also a swastika near the left footpeg)
The Iron cross is not a bad symbol but the other one.... not super good lol
What other one? Am I missing something😂
What was it?
The Nazi mark near the back of the clutch cover, the swastika
@@IRONCaptainPanic of god why would they have that?
You should like this no shifting or jumping or corners
All the blurred images lol this bike was a skin head tweaker project. Glad you blurred them out. Love the channel man
It’s a drag quad and as far as the fastest you should prob go to some quad drags there’s always banshees and there all same sled motores stretched low bars it’s a straight drag sled and looks like it’s been in some races I found a few vids with this quad I’m assuming by the guy you got it from
Dammm, definitely should not be in shorts 😂
You always taking my good deals I find in wi before I can get out there
Oh yeah and the iron cross has ABSOLUTELY NOTHING to do with racism. Google it, It was a metal that was awarded for bravery in a battle and other military contribution in a battlefield environment. Black people started saying it's a racist thing because you generally saw the iron cross worn by a ss German solder in WW2, also known as Nazis. But because nowadays they'd rather associate the word Nazi as the KKK or other racist organizations and would rather spread bad information to make white people look like we're the racists instead of learning the history. Iron crosses are also awarded to Americans so what your gonna call every solder who was ever given an award for bravery a racist for fighting for your freedom. Don't take that shit off man it's a badge of bravery for getting on the thing
Awesome vid and edits and filming and bikes
Why did you have to blur the grill??
There is an iron cross (nazi symbol), also there is a swastika on the quad near the foot peg
Congrats on your new purchase
Great video man!
he said ill leave that pipe tip there....take it for another ride. Be back later Beeeeitchez. This dude is Golden.
That thing is sick!
The shock is off so it gets more traction drag racing a shock on pushes the rear end down when ya launch
I laughed so hard when he said "it's literally perfect" ahahaha
Those exhaust pipes would be okay in the winter probably ride that thing in a t-shirt in 20 below LOL...
How would you get a shock in the back with the gas tank?
Kid literally came out of the womb working on bikes I thought I knew a good bit for my age but name this kids a savant
That thing is sketchy as hell, I love it lol
What’s it blurring out on the grill ? The iron cross ?
Did you get rid of the other deathtrap custom banshee?
Please no shock. That defeats the purpose of a drag build. The rear will just squat instead of getting the power to the ground. Its not built to go off roading.
It’s been a year since u posted that but Jesus that might pretty dumb it NEEDS shocks in the rear they just need TUNED correctly an it would be faster then it is now
Curious, how much air is in those rear tires?
What was blurred out on the front? a cross?
And swing arm is extended so you don’t flip over shorter it’s going to stand up
Btw he gave you wider bolt pattern on those extra hubs to change wheels but still really nice wish i could bring my 450 there to ride with you
Be careful bro! That thing is outrageous!
Keep ya warm In the winter 😂😂💀
The other wheel hubs in the bucked fit the hole shot rims ?
theres nothing else but not moving or flying like a bat outa hell on that thing
Drag race it!!.not much else you can do!
The fact you got it for 1800 blows my mind
I would try to redo the pipes if possible, before you get burned.
Leave them if a zombie walks up on you they get burned and in the winter they’ll keep you warm
@@whowho7969 you do have a point there about keeping you warm , Kentucky is infected with zombies lol meth zombies
1'37 ish .oh my bro.dude this things gna rip .I seen some of these builds with snowmobile engines on ish .dude I hope u kept this thing
Jesus joe this thing is mental great build though it defo has the careful with me or you die scenario right enough lol I think put shock on it with smaller wheels and some minor improvements and it will defo be badass awesome video man stay safe mate 👍👌🔧🔧🔧
I definitely think you should make a different bracket for a shock it could help with the rear end not being so stable with that bar and a shock should be much better..
what does it stand for? an iron cross?
I found this on marketplace and a buddy and I were gonna buy it but you got it first
Can we get a top speed run on her??
Great video and amazing Banshee! I don't think riding it with shorts on is the best idea tho, probably burn your legs a few times lol
Look up Planet Sands before you do anything to it !!! The build is for drag only ,and has had time and money put into it. You can't just go back to stock at this point either drag it or find someone that will or does. Do some research on your next purchase cause you have no clue what you've done got into!!!!!!!
How come you hid the iorn cross
There called snomo if you follow dirt drags you'll see alot of them .there was just a big race in Ohio this weekend. Last time I was there there was a 3wheeler with a triple an a 100 shot of nitrous. 300ft in 3sec
Put a shock on the rear. It spins because it cannot weight transfer and squat to get traction
Yeah that's the next thing I'm going to do to it
the tires are terrible for this build. Thats what i would do, put some real tires on it.
i have a banshee that has a 1988 Polaris Indy 650 motor i'm rebuilding at the moment love yours i'm trying to find out were to get the exhaust cans like you have if you know please respond love the channel keep it up
im guessing youve never seen our dirt drag racing 😂 we have banshees that would fly past that thing
Ikr....its hillarious that Joe wants to put a shock on it and take it "off roading". 🙄 Why buy a drag bike. Its bad-a$$ tho. More power to you Joe. Just don't kill yourself.
@@IllestA4 who you talkin bout 🤨
@@IllestA4 good 😤
A modded out Banshee is probably faster than that thing with the gearing it has
But that thing would smoke about anything in a short drag race
I can’t find a banshee under 5k in my area, you got a good deal
Because it's not a banshee it's a piece of shit.
😂 speechless where did u find this 🤣😂😂
What are you Blurring out a independent cross on the front
What were you blurring out on the quad?
An iron cross and also a swastika, the previous owner must of been a skinhead or a kkk member
Its made for sand drags 300ft
Yo vintage why did u blur front part like we’re the coolant goes ? And you should let chuck ride this thing and get his reaction!! Keep up good work!!
Cus there was nazi symbols and stuff
Is it an auto or a manual? I assume it’s a manual bc it has a clutch box but idk
Congrats you bought the real deal death trap now ! BE SAFE !
U should take that extended swing arm off and put some pipes on that are more like stock, this way you can take it on the trails and actually ride it!
It’s not a banshee. There won’t be anything “more like stock” because it’s no where near stock lol
Maybe its meant to be a hill climber? Back swing arm is waay to long to drive comfortable. the suspension needs experimentation. Engine is ready for anything though. Guy might be able to down swing the pipes or at the very least wrap them in some heat insulating rope. Take it to a muffler shop and see if they can build a exhaust system that goes down instead of up. Still use the expansion chambers but put a tight bend on it down instead of up
Definitely not for hills. The engine is mounted solid and the mounts would snap. No rear suspension wouldn’t be good for hills either. Those front shocks wouldn’t be able to hold up to the abuse either, I have those exact shocks on my mini bike lol
Insulating rope. 🤣
@@bigrob6076 You dont know the name of it or you would have said it. So I looked it up for both of us. LEDAUT 2" x 50' Titanium Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape
@@shartne it's heat wrap I've used miles of it bonehead.
@@bigrob6076 What ever Little Knob.
15:16 look to the right of clutch cover
bro finally someone says something about it all these comments were so damn blind
Hey 2 vintage I got a question I got a 2007 trx 450r and the coolant is boiling or it sounds like it’s bubbling when I ride it hard do you know what can cause that? Btw love your channel👍
It's hot. Make sure your rad is in good shape and your water pump is working proper. Go over the whole cooling system as maintenance. Fresh coolant etc.
How do you do any off-roading and not know how to say piaa or know what they are
Why you blurring the cross?
Feel like the long swing arm setup would be good maybe on a dirt track drag race setup. Or you probably need some drag slicks on it and take it to the track!
Without rear suspension, you'll never be able to get the rear end to hook up. Maybe there's something you can do about the huge clutch cover, too? As you sit on the machine, you'd never be able to get off the machine quickly! Looking forward to seeing what you do to the screaming Banshee next 👍🇺🇸
Totally not true I build 30hp motorized bicycles that are 100% rigid from the front end to the rear with 3 inch wide tires weighing a total of 100lbs and I can get my stuff to hook up. It's ALL ABOUT the gearing. He's running a huge rear sprocket which is already gonna throw alot of torque to the gear and then he's got a HUGE torque converter on it which triples the torque. If he gets a smaller sprocket dropping like 10-15 teeth he'll start to notice a huge difference in traction he'll also gain top end speed. Then he can dial that in how he likes it
There is a huge CVT aka torque converter under that cover so he probably won't be able to do anything about that!