Great coin ring making tool setup and instructions for beginners
Вставка
- Опубліковано 30 вер 2024
- Check out my website for coin rings!
www.changeyoucanwear.net
Jason works website for his dies and folding cones
www.jasonsworks.com
Skip King's centering cards
etsy.me/2ehgWBv
Jets tools ring stretcher reducer
www.ebay.com/it...
Harbor freight 6 ton press (don't forget the 20% off coupon)
m.harborfreight...
9 piece punch and die set
m.harborfreight...
Deburring tool
www.ebay.com/it... - Навчання та стиль
Hello! I started making coin rings a long time ago, but lost interest because I didn't have the tools necessary to make them "perfect" and quickly (because it really sucks to spend 3 hours on a ring that ends up not looking super nice). Recently, however, I've decided to get back into it and I found your video! It is very informative and clear and I'm very excited to start making rings again. Thank you so much!
Also, I like how you respond to comments. Many UA-camrs don't bother responding, even if they read them. You've earned a subscriber. :)
+Killer125922 Right on thanks for that! Good luck getting back into coin rings :)
Awesome video like always bro keep it going. And those haters are just a bunch of ppl with nothing better to do as I read it's not against the law as long as u do not change the value of the currency so they need to really wake up.
+David Rivera Thanks David :) It is always amusing to read the comments.
Your a good instructor.
I agree. I seen tons of coin ring making videos, but he does the best of all I seen
How do I get your address and order forms. So I can order from. I don't always have internet.
You can contact me through my website www.changeyoucanwear.net
The Harbor Freight 6 ton press is being discontinued! You can no longer get them online, and very few stores have any left! They’re $79 if you can find one.
People are so boxed in that they don't understand people destroy things to make sumthin more beautiful!! it's called art to all the negative commentary!!
+nishan pridgen Yes!! Thanks for the comment :)
Have just about everything now - only question: due to some mobility issues I think the Harbor Freight one ton Arbor press would be easier for me to shift around. Will it do an adequate job?
Thanks for your time with this video, so interested in making rings💯💯💯😊
Sadly harber freight doesn't sell the 6 ton press anymore..
That was awesome, I live by the same motto Prov 13:3
A book of wisdom from THE Book of Wisdom.
Instead of punching out the center hole you can drill a hole in the coin and correct the centering with a file and a caliper to measure for correct center. That punch set that you show is horrible. The plastic guide breaks when you hammer the punch and the punch doesn't always line up with the hole in the steel plate.
thanks for your feeds, they are most informative. ordered some kit online, cannot wait to get started
Hey ! Im bad at english so can someone help me with a list with the equipment he used?
Thank you for all the instructional videos I've been having a lot of fun watching them and learning how to make coin rings I appreciate all your detail and advise
You’re very welcome! I’m glad that they are helpful.
Whats the max size you can stretch a quarter?
How to keep stress cracks in inter side where it was punched out
Deburring and sanding that cut edge is the most important step in order to avoid it.
how small can you get a quarter?
Great video. Will a 1-ton arbor press work well enough for punching the holes, or is the 6-ton A-frame pretty much a must?
+vsman79 I find the 6 ton much easier. The 1 ton needs to have a cheater bar and the press can be broken by doing it. Thanks!
Ring stretcher on etsy is about $80
That is a great question. if I had to do it over again what would I buy? I've been making coin ring since 2002 using none of the tools that are available today. my personal recommendation would very depending on budget. the only ring stretcher I've ever owned was a Durston. so that was a good tip on how to save money on a ring stretcher. thank you for video
+darwin5763 You are welcome!
Tell me you pick through and make sure these are damaged in some way,cleaned,whizzed , filed , ground damage....sneezed on maybe?
If that helps you sleep at night, then... yes :)
Very awesome and positive video. You made it look fun. I think I will get some of the basic tools to start out.
Go for it!
I started out with no press, ( just an arbor press) punched the hole with the harbor frieght punch, no cards, coin on tape, a counter sunk hole in a piece of rail road tie. Using a leather hammer on the coin on the mandrel , flatten it by hitting it. Then using the piece of rail road tie, to size it the counter sunk hole. Then after a few rings, I fell into the tool hole, lol, 10 years later still making them, as well as the bells, and hearts etc, about 3000 dollars later.
It's a great hobby, but beware can be very addicting, lol btw, I still use the hammer and anvil method, to straighten out Washington quarters that wobble. Wouldnt hurt to learn that method, save some money on tools too
Can someone explain me why the base plate is thrash ? I don't understand, he always say that and i don't know why, i want to understand because i just ordered that ring stretcher and reducer. Thank you
Its extremely rough
*5:51** it is not very what you are doing, can you explain it better please? greetings from Ecuador.**
+Enfermo Liguista Some of my earlier videos go into greater deatail. Check back in those and you should find the answer. Thanks!
Btw, try a size 2 and half toe ring, from mercury head dime. That's a challenge, lol
You have to off set the hole slightly, to make it more comfortable, for under side of the foot.
Beautiful work mate .
hey man just wanted to say thank you. cause of you I now have a cool little business now. if you come over to fat dad gamer on you tube check out my rings and let me know what you think.
+Cory's Coin Rings Hey I just finally had time to check your channel out. It looks like you are getting it done! Thanks for the comment!
Awesome video , thank you for sharing your knowledge, it's very much appreciated.
3:26 that guy hit his peanuts.
Where's the link?
I just looove it!! Thank you so much for the info!!! Deeply appreciated... I will do this here in South Africa
NICE VIDEO AND INFO
I noticed that quarter was 1994 Tyler. Was that a clad coin yeah or what percentage of silver was it? Thanks in advance
this was very interesting! ive been dying to start making rings for gifts and it seems so expensive but under 300 is really impressive! thanks for doing the vid!
It might have been one of your videos that started me off. Been too long ago, but I always watch your vids, to this day, Gr8 job. Lots of us out here, but few that truely master the trade
thanx 4 the info … I have learned so much because I got away from the T.V. thnx 4 yr time.
Skyleri don’t know if you even look at this anymore but do you have online classes, I know you have in house classes but just wondering cause I could use some advice and help
I should figure something out but don't currently.
Change You Can Wear you say you offer classes ? Where are they at
Great video I'm just getting started and your videos are a big help.
I really appreciate how you narrow it down to what tools go with what coins as in the dies that actually saves people a lot of headache and a lot of money.
Great video - to the point and very informational. Thanks!
Love these videos..thanks for taking the time to show us !
sizes..what size is the absolute max each coin can go to??.....i've been told a quarter can only go to size 7 but i was able to order an 8 ..i fell in love with this "hobby and am collection the beginners set and will upgrade as needed ....but how big can each coin go to ??
They can go about as large as you want. I personally stop quarters at a size 11.
@@CoinRingsfromTheMint about how big can a small dollar and 50 cent piece go? before they get iffy
and whats your take on this stretcher? jetsinc.com/categories/machines-and-equipment/ring-stretchers-and-rollers/premium-ring-stretcher-6-spline-enlarger-mandrel-sizer-reducer-16-depressions-a1-20-lz/
Really great presentation. Helped me understand a nice affordable setup.
Can I get a list of tools I need to start thank u
Check out all my tool list videos!
GREAT video, Thanks for sharing.
Great videos, easy way to learn ring making.
Nice demo! If you set up to make a batch of identical quarter rings, how many can you crank out in an hour?
+Gone Camper Good question! I'm not totally sure but around 6 to 10 i would guess. I never really time myself.
Nice
Thanks
so helpfull thank you very much
Very good quick simple show and tell. Thanks for keeping things simple. Good job.
+Robert Langley Thanks Robert!
Can the same basic principles be used with silver coins. I have access to many many old silver coins pre 1964. Want to make some jewlery
Yes most definitely!
Nice to see you staying active with the videos!!! You're looking great!! Life is good!!
+Paul Linnell Thanks paul!
Excellent vid. After making a few rings it showed me where to improve. Thanks.
+John Day Good deal thanks for the comment!
Might be a rookie question but will the die for a quarter only make one size ring? If not, what sizes can you make with it.
Pretty sure it would also be ok for a nickel, but not sure about other sizes. I just purchased the quarter sized die and it showed pics of quarters and nickels.
These videos are great! I work with teens through our Mentor Program and recently we have been able to get the equipment you describe here. A mentor has just signed on to teach them and the teens are so excited to be able to learn these skills. Kudos to you - Thanks!
Wow that is amazing! Thanks for letting me know.
Just got my harbor freight 6 ton press. Does four press bed wabble on the pins? Mine won't stay flat
+nascardude86 Yes it usually does.
Nice video. Would like to know exactly how you go about sizing the rings to a certain size.
+Frank Grammatico Thanks! I just checked my videos and realized that I have plenty of videos explaining how to size Morgan dollars but only one on how to size quarters. And it is one of my first ones. It is hard to watch lol but it has the info for you. Thanks! ua-cam.com/video/xudLruLEPMA/v-deo.html
Nice ring Bro! Can you do a video on advanced tools and how to use them?
BTW How do you get your stretcher to stretch pulling down? Mine has to go up and back!
+John Sellers Yep I have a channel full of those videos! My stretcher doesn't stretch pulling down either. It works the same as yours does :)
Thanks!
Great video. Lays out the whole set of machinery and what each component is used for. Well done!
+Joel Buchanan Thanks!
I found it, didn't realize it that it was on the back of the catalog that I filed in the recycle box
+sbjorgy lol good deal
Great video 👍 as always
Same stuff I am planing on getting in a few weeks! Thanks for the videos!
+The Mix 103.3 You are very welcome!
Great video! Please continue with other tip and different coins!
+Larry McNamara Great idea I will!
I just made and 3D printed a centering card and it doesn't cost 25$
GamerGuy212 Not everyone has a 3 David printer or the ability to do it and the people who do it for a business deserve to be paid. A great example is my morgan rings don't cost me $120 and you can do it yourself for less but but everyone has the tools and skill set.
Hi, I’m going to make my Mom a Barber Quarter. Would I use the same 1/2 inch hole? How much over do I need to stretch it to make a size 9. Thank you for all your help. Your videos help me tremendously. Sonya
Yes it would still be a 1/2" hole and I stretch them 1 to 1.5 sizes over a 9 before reducing it back down. Good luck with the ring!
Change You Can Wear thank you so much.
I laughed so fucking hard at that sledge cut away scene.
+Dan Clifton lol!
ВЫШЛИ СУВЕНИР? В РОСТОВ НА ДОНУ
Why would I want to buy something I have to tamper with to get it to function properly? Lol
+MR KY You are right 10 minutes of tampering is totally worth $200.
Coin Rings from The Mint - Change You Can Wear I'll probably just build my own completely :)
Great video. Great to refer newbies to:). Love it!!
+Neferene Thanks!
Would there be any benefit getting the 12 ton press instead of the 6? such as pressing a custom die into blanks?
+Dustin Hamzehloui I have been thinking of picking one up! Even for the larger hole sizes in Morgan's it might be helpful
Thanks for the quick reply bud. I'll be picking up some materials to start making my own rings and custom coins soon. Love your video guides.
I purchased this same ring stretcher/reducer on ebay from Jet Tools. And while it works well and I'm happy with it for the money spent.. the reducing plate is way too small. I can't reduce any rings over size 8-10 and. Do you have a recommendation on where to get a plate that accommodates larger sizes?
+Tanner Hofdahl I mentioned in the video to get rid of that plate and use Jason's works dies with it. It isn't a plate but individual dies that can fit under the ring stretcher. You cam find them at jasonsworks.com
Is that same die large enough to reduce half dollar rings also?
+Tanner Hofdahl Yes there is a die large enough for halves.
Are you selling the rings you make
+Kid Gotti Yes I do! You can order through my website www.changeyoucanwear.net
how do you order from kings site , it's a dud, all it shows is pictures and nothing to click on to order.
+aux1z11 oops I put in the wrong link. Here is the correct one. Thanks for pointing that out!
etsy.me/2ehgWBv
Coin Rings from The Mint - Change You Can Wear Thanks Sir
Great video...keep up the good work!
+Badback60 Thanks!
where is the 20% off coupon for the 6 ton press
+sbjorgy Otherwise changes all the time but they always offer it. Just Google 20% off harbor freight. Thanks!
awesome job !!!!
could you punch out the center of the coin with the ring sizer like you did with the 6 ton press?
+bobnardo26 No it will end up stripping out the gears because of the force needed.
thank you! great video!
cool! thanks for the tutorial
+Logical19 You are welcome!
do you have some for sale? really Nice work!!
+Cassandra Stenholm Yes I do! Check out my website www.changeyoucanwear.net.
Coin Rings from The Mint - Change You Can Wear
Was that Alec Steele at 3:29
Yes. He is working with Brian Brazeal in that video. He's come a long way, haha.
Will the punch work in the stretcher
No it won't
Ok thank you
Great vid!
+TheNinjapig27 Thanks!
muito bom
+Edson Francisco Bonfim Thanks!
отлично!
+Евгений Луценко Благодаря!
Great informative video. I recently started coin ring making with mid level equipment excluding expensive dies or a ring stretcher/reducer. Now with a little extra money i have, i wanted to pick those up but have been unsure of the legitimacy vs price of the equipment. I can now make a confident purchase, thank you!
+TEXB0X Yes! That is exactly what I was hoping for with this video. Let me kbow how you progress.
hey skylar what ball bearing size do I use on dollars and half dollars ?
+Ryne Thompson I can't remember right off but if you look in the description of my original morgan video and half dollar video it will be there.
Coin Rings from The Mint - Change You Can Wear ok I'll take a look. is metric or standard better?
Ryne Thompson Standard is more common here in the US. I really need to change that.
Coin Rings from The Mint - Change You Can Wear ok thanks I need some lol
thank you so much man I started making rings for people cause of your videos its been a blast. if you would like to see what ive done im at Corys COIN RINGS on facebook. I would love to hear what you think. and im on youtube at Fat Dad Gamer.
+Fat Dad Gamer sweet! Thanks for the message!
After watching some more of your videos, I have a couple of questions.
*1.* Since we are not using the die plate that came with the ring stretcher and instead using the die from JasonsWorks, is it still the exact same process as you show in your "Step 3 How to make a double sided clad quarter coin ring - sizing" video? In that video, you use the die plate from your American ring stretcher which has 6 different sized holes to keep making the ring smaller, so I just want to make sure I'll be good with just the one die.
*2.* In the same video that I referred to in my first question, you made sure to have the ring a quarter size lower than your target size because you were going to file the inside. Since you don't use a file in this video, I'm assuming the deburring tool does what the file did in the other video. Should I still make sure to make the ring a quarter size below my target size before using the deburring tool at the end?
Killer125922 I haven't watched that video in years. But yes for quarters, you can use just the 1 die from Jason's works. The deburring tool takes the place of the file and I now go 1/2 to 1 full size below my target size to remove more of that lip inside the band. It is really a personal preference though. I like to get as much of that lip removed as I can.
Okay, sweet! Thank you for the speedy and precise response! :)
Hi, is a one ton arbor press good enough to punch holes in coins? Thanks
+JW Collect in my opinion not really. I would spend the extra $15-20 and get a 6 ton a frame press
Why would anyone wear a quarter as a ring? I don't get it.
Lol, you ask this? With tons of people wearing a nose ring, like cattle, omg