OE Error LG Washing Machine Not Draining You Can Fix Easy
Вставка
- Опубліковано 7 лют 2021
- OE Error LG washing machine not draining easy fix. 0E or OE error on LG washing Machine can be caused by a number of issues. The Washing Machine not draining and other things stuck in there. This is a step by step tutorial on how to fix your LG Front Load Washing Machine.
You can find a replacement pump here www.ebay.com.au/itm/224577020... - Навчання та стиль
Omg all can say god bless you I'm a senior alone and was panicking at how i was going to pay someone to fix my washing machine or have to buy a new one i did what you said on the video & it was fool of rubbish from my dog & my cats fur thank , thank you, thank you again God bless you.
welcome glad it helped you
I cleaned mine out but mines still not working I have a repairman coming tomorrow cause the pump is a lot to get to
@@raynah412 did you find out what was wrong with it? Because mine is doing the same.
Thanks! Every other video just says "clean out the filter" but you were more comprehensive & covered the pump replacement too. Thanks!
welcome glad you found value in this video. The filter is often overlooked
Thank you for this clear, detailed video. Those of us that are visual learners appreciate showing how it is done. And saved me a ton of money.
Excellent tutorial. There are websites that charge you money for this information. You are doing a great service by providing it for free. And that my man, gets you a new subscriber 👍🏾
Welcome. Thanks mate. Hope to continue providing you value
Thank you so much for making this video! I was able to fix my washer by myself, mostly because of this video. You are awesome!
Thank you! Thank you! I just fixed my washing after 4 hours of failure. God bless you!
Thank you so mucho for this video, I just fixed my washing machine by myself watching this video. I’m so grateful. You’re the best.
Just followed your tutorial and although my machine was a bit different, it was pretty much the same. Easier actually. My control board was on the bottom of the machine facing down in the middle under the drum so the entire operation was simplified.
Thank you so much for demonstrating how to solve this problem. I tried twice and got frustrated until I found you. Thanks
Thanks for this very helpful video. My LG washing machine was stuck with an OE error, nearly sent it to a service centre. Found a sock stuck inside the side hole there as shown in the video. Machine good as new. Kudos. 👊👊👏👏👏🤙🤙🤙🤙🤙Already subscribed to the channel
awesome glad to hear you worked it out
Thank you so much, Sir. You saved us a lot of money for what was a simple I issue to fix!
Good video, however if you have a clog, which you usually do if you have the OE, there's a few gallons of water in the machine. Taking off the cap dumped way more water out than a towel can handle.
This just happened to me as well 😭
Thanks, this worked a treat! I sat there and watched the machine do a full cycle and it worked perfectly. Best wishes :)
Thank you, Mr. Washy Washy! You saved me a lot of time and money.
Hey, i just wanted to say thank you very much. This video solved my issue. I really appreciate the honest, straightforward advice. Other youtube channels just tell you to replace the drain pump. These other channels also conveniently sell the replacement drain pumps...
Mate this was the most informative washer fix video.
Thank Goodness for this video RIGHT NOW! My last repair for the same thing the tech said it's on its last leg! When he was repairing it I RECALL to the T he kept the laundry door closed so I couldn't see what he was doing and not mention he was done real quick like the same time me cleaning my filter less than 10mins! I was screwed basically! I went on YY to "fix same issue" and saw this video! Don't believe everything they tell you! Lesson learned stay right by their side during repairs! Thank you for this video?
Thank you! thank you!! for your video. I’m from Ohio USA. All I had to do is drain the washer and clean a really nasty filter. It’s washing like a champ again.
welcome glad to hear its working again
Thanks for the video, every other LG washer drain repair video suggested I'd need to remove the lid or tip the washer over, and neither were an option with my stacked units in a tight space. Just popping off that lower front panel saved me a ton of effort and possibly back injury. 👍
So you were able to replace the pump from the front?
@@JoeS97756 Yeah, removed the Philips-head screws by the filter, and was able to pop the bottom panel out like around 7:55. I must have a different model, because I was fortunate enough to not have to remove extra parts seen at 9:55 and beyond. For complete clarity, my washer was model WM1355HW
Really thanks for help, struck in troubleshooting from last 1 hours, after opening draining cover lot of mud come outside and ots resolved issue.
Also I clean external pipe by shaking it.
This helped me diagnose problem, and I was able to clear a clogged pump by using the manual testing sequence shown at the end. Thanks!
Awesome glad you fixed it. Thanks for the $5 appreciate it
I want to say a big thank you for the tip on the pump it really saved me a lot cos I was thinking of buying a new machine. My machine was a bit of an older version so it was harder reaching the pump but I got it done. Thanks
welcome im glad you managed to fix it
Fixed my washer in no time. Thank you!
Awesome glad it’s helped
Thank you for the video! Got my washer working again!
Videos like this has saved me a ton of money. Thanks much!!!
Welcome glad it helped
Thank you very much, only £30 for new pump and easy fix . Thanks again
This video was incredibly helpful. I was able to fix my washer by myself because of this. Thank you!
Welcome glad you fixed it and saved your machine
@@askmrwashywashy Literally just saved me $300 as a poor university student - thank you!
Hi, that’s very helpful. Although my machine looks fairly similar it does have that front removable cover?? I would imagine it will need accessing from below??? My filter is clear and sometimes it’s OK. Would it be possible to have blockages in the outlet hose or beyond the filter? Pump looks the most likely though. Any thought??
I pulled the hose off the bottom of the tub and found a sock, credit card and fluff blocking the passage to the drain pump.
So definitely check that before ordering parts.
Mos def yes glad you found that
Super helpful video, Thanks for helping me to fix the machine
welcome glad it helped
THANKS SO MUCH FROM LAS VEGAS NEVADA!
If your machine won't drain try blowing hard into the drain hose. Mine came free and saved me from having to take the machine apart to clean it, replace the pump or calling a guy out.
Thank you so much for sharing your experience . I have a question need your help . I have replaced the new LG water pump, checked all the hoses cleaned perfect. but no water comes out when draining water at high speed. What is the problem? Thank you for your advice. thank you!
Thank you for this video! Super helpful! My LG washer has recently developed a new issue. The light does not turn off after a cycle until I completely disconnect the machine from power. Would you know how to tackle this issue?
Welcome. I have had that issue before. there might be some water ingress in the connectors for the light. If you turn on the drum light manually does it go off
Big Up and God bless you from South Africa
Hi brother. Glad you like the content
Thank you very much God bless you and your family
Welcome glad you found some value in the video
Thank you bruhhh!!! You Saved Me $1200 🐐
Thank you for your help you are a legend. I’ll sub out of respect atleast. You are a saint mate and deserve nothing but good things.
Thank you so helpful videoa
Very helpful! Thanks!
Great video! One tip for future video production: if you need to point the location of any screws, use a long and thin screwdriver instead of your finger for pointing and it will be much more clear in the video.
Thank you will do that cheers
@@askmrwashywashy l
WOW. Thank you. Good news. That fixed my washer. Bad news. There is now a water all over my floor 🤦🏻♀️. For though. Thank you.
Welcome glad it’s sorted
Thank for your video, I am one that has the oe error on, and am suspecting pump is out I will try and fix it this weekend thank you 😊
Great glad you could find this video. Try it out and see how you go
Thank you! Incredibly helpful! Liked and subbed.
Glad it’s helped
Ditto! Thank you!!
Came back to show my result... I disassembled it 3 times... But became faster doing it haha.
I unplugged every hose. The bottom one from the drum, the main one, clear. The bubbles ones (right pump motor) were clogged in the connection to the drum gum (the one that attaches to the door), cleaned them, but it was not the OE cause.
The motors were working (I extracted them and tested directly to the current with a cable)
I even disconnected a black somewhat big but short hose from the back, clear of obstructions also.
The last possibility was the white hose going to the waste. It its the exit one, that connects to the pump. I disconnected it from the pump and removed it completely, it was separated by a plastic union. I connected one extreme to the water and left it flow but nothing was exiting from the other side. Didn't have a long thing to unclog it so I took it to the street and grabbed it frok the plastic union, then I started spinning and the centrifugal force unclogged it, expelling the waste obstruction. Tested it under the water again and now it was flowing. Reconnected everything and worked again.
My model is F14U2TDNO - front disassembly is the same but pump motor is located bottom right behind filter/drain. No need to disconnect any hoses, just tilt pump unit, release the three screws that hold the motor and swap.
Fantastic video ty!
Thank you! Thank god it was a filter issue.
welcome. Awesome i'm glad you found it was a small issue
Right, after fearing the worst I removed the waste pipe and watched the machine try to pump the waste water out, it came out like a trickle. After a while, I noticed something at the end of the hose moving in and out when the washing machine tried to eject water. A quick shake of the hose and it released a fairly large amount of fibres from a rug that had been put in the machine.
It came out like a hair ball and immediately afterwards, the pressure of the water coming out was more akin to a shower! All is well.
Fixed!! Thank you!
Glad it helped!
Thank you so much for this video. You saved me from my husband getting mad at me.
Welcome glad it helped
Welcome glad it helped
Unplug!!
If tub isn’t drained, watch out for lots of water! You could drain via the black hose, with ver shallow pan. Perhaps rig up a hose into a bucket or outside because the water might equal 2 buckets full.
Thank you a lot 😊
Spot on advise worked first i really appreciate it your a god send thank you and god bless 🙏 ❤
Thanks my friend 🙂
Thanks for the video,
Alhamdu Lillah, I fixed my washing machine Drain problem. 💐❤️
welcome glad it helped
Thanks a million times, this helped,🤗🔥♥️💕❤️💃💃💃💃, even though I ended up with the floor full of water 💧 😂😂, but I'm excited, thank you, thank you, thank you...🙏🏽🙏🏽🙏🏽🙌🏼
It also worked for the LG thin Q. Washer and dryer combo
thank you so much my problem solved door opened ☺️
Thanks mate. You are amazing. Would have paid a lot of money to get mine back and running. Wife is proud hahahaaha
Welcome mate. Glad the wife’s happy 😃
Great help! Trying to find drain pump for my lg electronic washer drier FH4A8TDH4 N can you help please
My machine clog was up the drain line to a 90* angle, was sand and dirt small dog short hairs. Blew air compressor air back through in opposite direction of how it drains
I washed a carpet that was way too big and it clogged the filter. I put a towel like you said, but the filter was so clogged, I needed more like a bathtub. Needless to say, I was doused in very smelly water 😂😂
What do u mean the towel clogged the filter? How does that even happen? I thought the filter just filters dirt.
@@SirRorschachJack I put a towel under the washing machine to catch the water that comes out of the filter. But it wasn’t just a little bit of water it was a ton.. no towel clogging anything 🙂
@@SirRorschachJack if you’re referring to the carpet, it was so large and dirty that all the hair and dirt clogged the filter up :)
Thanks!
Very clear
Thank you
Hi, I have a LG front load that washes fine but when it comes to the spinning cycle it doesn't spin and OE error will appear. However, the water is drained and I've already replaced the drain motor.. What could be the issue? I suspect it might be the pressure switch or control board? Please help me
Mine has a big panel in the front, not this small part on the bottom, any videos of how to open that?
God bless you dear
Hello and thank you for the video! I have a model LG- WM3997H, Do you know what pump I need? I did a search on eBay for that model and I am not finding anything. I appreciate any help.
I would say maybe remove the one on your washer first and try to match it up by typing in the product code on ebay or online
G'day mate. Have you done a video of actually removing the pump and putting the new on in ?
Gday I haven’t done one yet but will do one in the next few weeks. It’s simple to remove. 3 screws to undo it
Great and informative video. Legend. However, my machine is only about 3 months old and gets the OE error every cycle. Have cleaned filters and blown down the hose to clear any blockage.
Any other ideas for a new machine?
Check your drainage. The hole where the pipe goes into might be too narrow
Who else is currently cleaning the water spill from the filter because they thought there were to smart and opened it before he said about the spill
well, thanks for the video. I did not have to check the pump :)
Hi! Great video! Tried removing our filter and the cap top came off without the filter basket, we have never cleaned it. 10+ years. Is there another way in?
Hi i have the same issue did you fix it please if you can help me
Life saver thx
Welcome glad it helped
thanks for the video , i replaced the pump , clean the hose , and the hateful OE still on when spin cycle started . Any idea ? Thanks
welcome. Glad you are fixing it. Which pump did you replace ? You might have replaced the recirculating pump.Also please make sure that you reinstalled the wiring to the pump. Can you hear the pump going ?
@@askmrwashywashy Thanks for replying , I replaced the drain pump ( bigger one from the left) You meant the little pump across it ? And no , there was no humming sound like it used to be when spin cycle started .
Anyone going through the pain of this at the moment it may not be the pump ,I had a kids sock stuck in the pipe under the drum ,hadn't reached the filter,easy enough to remove pipe from drum but WHAT A BALL ACHE to get pipe back on !! Access really limited so you' re working blind, much cursing and mangled knuckles later it's back on and working. After I'd finished a had a too late brainwave ,the mrs has one of those thin spiral flexible things for removing hair and goop from plug holes this may well have reached the sock from filter end and pulled it out ,worth a try before dismantling everything and now ALL small items WILL go in a mesh bag for washing !!
I might be in the same predicament... where is it located or how you accessed it? through the back? I replaced the two pump motors and OE came again :(
@@fusiongamesthe pipe under the drum is accessed from the front after removing panel BUT if something is stuck in that pipe you might be to get to it via the normal filter pipe on front right, you can get long pipe cleaner type plug hole cleaners designed for removing hair etc ,I reckon it may be possible to poke it in via that filter pipe and grab onto a sock or whatever is blocking it .
Thank
Hi sir, can you give me the link for replacing the drain pump? Still thinking how to put back the wires...
I can't get the front of the washing machine off to access the pump behind. Where you unscrewed the second panel to get to the guts of the washing machine, that lower panel on mine is metal and riveted in place?
Hi. What’s your model number ?
Hi I have the same issue in my washer machine but I don’t know how and where to find the right draining pump can you help me where to find it please
It’s a LG model WM3370HVA
Due to noisy working, removed pump motor assembly that you talk about here in this video..
But started getting OE fault code with water not drained from machine..
Cleaned both pumps properly and removed , dried magnets, greased the o rings after drying..
BUT I guess I could not align and connect both motors properly...do you have a detailed video for this ?
Lg model F1480RDS5 pump model 4681EA2001E(N)...looking exactly like the one in this video..
Can you be of help?
Quick question, does the washer make any specific sounds before the pump breaks?
yes it will sound loud. A good working pump is quiet
@@askmrwashywashy Can you show us what it normally sounds like please?
Whats the average lifespan on one of these drainpumps? I replaced mine and then only a few months later started getting OE again. I did a thoughough clean of all the pipes but i think the drain pump is failing again 😩
Hi depends on how often you wash but should last about 2 years or more. Make sure you’re buying genuine Oem replacement.so many substandard ones out there
I'm having this same error, but when I open the filter water keeps pouring out (to the extent its already soaked through over 10 towels) and shows no sign of slowing down. Any recommendations for how to deal with this?
Thanks
Welcome glad it helped
So can you help me I opened up my black filter pulled it out and there's black plastic chunks and a rubber seal in all kinds of pieces of rubber seal came out in the filter and my spin cycles is not working is that a major fix on my LG stackable washer and dryer?
I have same problem did u fix it please if u can explain 😊
The washing machine that I have doesn't have a basket for a filter, you turn the cap off and using a brush to clean the inside.
what model is it?
Have to do the work. I’ll be back when completed
hope it all went well mate
My Washing machine isnt throwing an OE error but smells strongly. and is retaining a lot of water in the pump drain area. Draining it will alleviate the smell for a few days but then it will come back. There are no visible blocks, the filter is clean. We regularly leave the door open and run tub cleaning cycles. Could the Pump not be pushing strong enough or could there be a block in the drain hose?
Hi there. I would check the drain hose for blockages. You might also want to try and pinpoint when the problem started. If you’re using too much softener/soap could be an issue. Try and do a tub clean with 100mls bleach and 50mls white vinegar that should get rid of the bad smell
Hello
I’ve got an lg inverter drive 11kg
F1443KDS
Showing drain code what pump would I buy
I would fit myself after watching your excellent video
Hi Amy universal pump will do. I use these you can find them on eBay www.ebay.com.au/itm/224577020130?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=5M1ZhRlYQp6&sssrc=2051273&ssuid=5M1ZhRlYQp6&var=&widget_ver=artemis&media=COPY
I replaced the pumps on my lg washing machine after getting an oe and tcl error code.
After replacing the pumps I ran one cycle and it’s giving me a tcl error code again and water is left in the tub.
What can it be. Please let me know if you have any feedback thank you so much.
My machine doesn't have the lower right corner opening for the filter.
When feeling inside the drain hole, should I be feeling a filter of some sort? I’m definitely feeling something that could be a filter but I can’t see it to know for sure.
Use a torch and take a look inside there should only be the pump impeller in there nothing else. Make sure you remove the filter first
@@askmrwashywashy it was the pump impeller.
I just bought a set uses and when I put it on regular cotton load it locks and then stays on scaling load and won't do anything. I did the test run process and everything works except the last step draining... The drain filter had a ton of stuff in it when I cleaned it and now every time I drain it it gets cleaner and cleaner. How can I clean that part out completely? Or is it possible that the large drain hose in the back is clogged? How can I check to see if that is clogged?
you need to check the drain pipe and the black pipe that drains water from wash tub into drain filter. You can remove the bottom cover under the door if removeable or you can access through a whole under the washer if there is one ( you would need to lay the washer on its side ) or you can uninstall the base of the washer, they'll be maybe 15-20 screws. you'll need to lay the washer on its side as well.
I'm not a pro but one thing I learned from fixing fridges freezers game systems and televisions is its all the same. Different items same organs just gotta know what "organ" needs changing
hello , how to change drain pmup LG washing machine model : WDU1H466JCH ?
I did broke the cup cover of the filter, I don’t know what to do please help
What is the model of the pump?
Askoll
I had this problem. Replaced the pump still no go. Checked the sensor and ordered a replacement for that. On a hunch I blew into the hose feeding the sensor and felt a pop. Something had gunked up that inlet and washer has worked fine since.
Awesome glad you were able to fix it. Good on you for persisting with it
Where's the sensor/hose?
@@shaunhill2466 Sensor was in the back right of the unit if you are behind it. The hose leads down to the bottom of the tub to measure water levels. It was gunked up with those scented add-in pellets. Since we have dumped those we haven't had any issue.
@@jeffriechers3236 Thank you very much!
Sorry, do you blow into the exit hose? or another one?