Rear wiper arm repair 2003-2009 Toyota 4Runner 4th Generation seized spline
Вставка
- Опубліковано 15 жов 2024
- Remove the broken wiper and heat the press ring to remove. Install the new arm and blade and cut to adjust tension
4:11 heat with torch
4:58 removal of seized spline collar
8:10 installing arm
11:53 cutting arm to increased tension
13:50 testing with washer fluid
Amazon part link below
OTUAYAUTO 8524135031 Rear Wiper Arm Blade Set, Replacement for Toyota 4Runner 2003-2009 a.co/d/d9Fgd7o
Dude amazing ... I was dreading this project on my 2004 4runner because the "nut" was rusted on tight. Most folks were saying..."lube and tap, lube and tap". I did that till I was frustrated and came to your video. BAM! HEAT! took me 3 minutes and the damn thing pulled right off. Thanks Jacob! This is what makes UA-cam and folks like you wonderful! Cheers!
Thank you for the positive feedback. UA-cam has helped me through so many obstacles too
Thank you!
Thank you for upload this video.
Thanks, how is it holding up so far?
It is still working great!
I got the same problem with the arm stuck into it, unfortunately I don't have a torch. I don't know what else to do
Try a blow dryer on low speed high heat. It may be enough if you hold it there longer. Also try penetrating oil, only a small amount each day for a few days to see if it lessens up. I believe the wiper is brass and a softer metal so it may just take more time without a torch.