With USB-C and USB PD you could get up to 20V at 5A from a USB-C power supply. That would make this thing really crazy. The ZYPDS is a small USB-C chip that asks for 12V or 20V from a USB-C power supply, they're super useful for projects like this.
That's why I always like creative people. I love to spend a few minutes watching this kind of videos because those minutes are worth it. Learning always something new
Verry Nice project and olso great for carving in to little projects of in a Tiny space and you can dril a hole👌 PS whats the model number from the little DC motor💪 Greets MD 🇳🇱
@@roomspaceplayground thanx💪 go on with projects like this make a 2.0 of it 👌 with a speed controller/display, maby a red little stop button and on en of switch, and e put some rubber grip on the pen ..... Love this project AM gonna make IT olso greetings MD
Cus it low voltage use a FET or transistor with a sliding potentiometer needs slowing a bit or even a gearbox helps prevent ya motor from burning it's brushes Cud even directly connect drills make the drill shaft with a thread or square drive use a magnet to hold it in place
agree, i had the same thought after trying it. but after all this project is just a simple one. I might make a new one with a gearbox like you said next time. Thanks for the advice :)
Atento a las altas RPM de esos motores son de alto riesgo cuando se utilizan en funciones a lo que no están diseñados. La idea está buena y sirve pero atentos siempre al tema de la seguridad.
Hi Thank you. The materials basically are: - 1 mm drill bit - 8 mm chuck for the drill bit. the inner diameter is around 2 mm. - LK0236 motor - 8 mm aluminium pipe - Male and female power connector - USB cable Hope it helps :)
not high enough in my opinion, as it will stop if I push a bit deeper. If using it quite some time, it does get warm. That's why it has to use metal body.
7:15 I said to myself, “Is that going to stay on?” and instantly that happened. I felt bad but laughed pretty hard at how I just said it and then that lol
Hi, my original one has no brand on it, I've got it from some online shop that I forgot already where. The pen drill is still working just fine, it is just that you cannot push hard like it has not enough torque, besides that it is still working and useful in tight space if you push slowly when you drill :D
Ok So Now that I am Moved in To my new Home I have the time to Build this Drill . Everything Is going well Except for the Electrical Connection on the end The Ones I ordered are way to big for the tube Do You know what size those are in you project ?
Your video was nice and ideas was cool aslo ,so may I requested to kindly Please make DIY BMS lithium battery charger. It's important part how to charge lithium battery ,that why requested to you please make "DIY BMS lithium battery charger."easy and simple
I have added the information in the description. The materials basically are: - 1 mm drill bit - 8 mm chuck for the drill bit. the inner diameter is around 2 mm. - LK0236 motor, I think it is a motor for drones. - 8 mm aluminium pipe - Male and female power connector - USB cable
Я заказал моторчик с диаметром 0.8мм. и ничего не подошло 😢😢😢, ждал долго) и диаметр очень маленький, нужно как минимум 1.8 мм. Диаметр вала моторчика!!, Огромное Вам Спасибо за помощь и информацию!!!
Not very sure if this is the correct one, but here you go : shopee.vn/B%E1%BB%99-%C4%91%E1%BA%A7u-k%E1%BA%B9p-m%C5%A9i-khoan-mini-tr%E1%BB%A5c-2.0mm-2.3mm-3.17mm-ch%E1%BA%BF-m%C3%A1y-khoan-m%C3%A1y-m%C3%A0i-mini-LK0069-i.8004713.2372391943
I found it on local online shop, people call it chuck or something else I'm no so sure either. But i'm pretty sure store like aliexpress would have many.
People who build miniatures and models would love this, it's like a powered pin vice.
I like how he shows the problems encountered also.
I feel like you need an on/off switch on the drill itself. It turning on by plugging it in seems like a recipe for disaster.
Agree, I am planning to upgrade this pen later on. Thank you for the advice!
@@roomspaceplayground maybe you should control it by a pedal, like a tattoo machine
@@roomspaceplayground , you should patent it
Bro that is so cool having your phone do that
I want to use this for bookbinding, super cool idea..
I use to own a small mom and pop printing shop, about a dozen years of experience,if you hit a glitch let me know I'm glad to help
With USB-C and USB PD you could get up to 20V at 5A from a USB-C power supply. That would make this thing really crazy. The ZYPDS is a small USB-C chip that asks for 12V or 20V from a USB-C power supply, they're super useful for projects like this.
Wow, that is a new knowledge for me. Thank you for sharing, definitely will try it when I upgrade the drill :D
That's overkill and will burn that motor
@@davey2k12 sure of course they'd need to modify the rest of the design
@@lost4468yt yeh just by a cheap one 👍😂
@@roomspaceplaygroundbuddy, use heat shrink tubing instead of duct tape.
Heat shrink as grip works well too…. Instead of the tape, great build bud, keep up the work
Thanks for the tip :)
That's why I always like creative people. I love to spend a few minutes watching this kind of videos because those minutes are worth it. Learning always something new
Clever little build. We shared this video on our homemade tools forum this week 😎
Motor used doesn’t have enough torque to be used as drill it simply a high speed motor
Agree, this is a fun project
Ahhh that dental drill sound!!! I'm having Bad flash backs or is that panic attacks! Lol neat drill tho!
Thank you :D
Mini drill?!? Dude, you're driving so crazy!! It's a whole billiard cue!!!
250 полуляхов из 250 ! хорошая смена растет!
Thank you! :D
🤣@@roomspaceplayground
Excellent my brother infact marvelous project plus clam without noise of music i loved that the most but over all too hats off to your project 🎩👍😊
Мини дрель?!? Чувак, ты гониш!! Это же целый бильярдный кий!!!
That tool would make a great asset to have in the shop. Excellent build and video, thanks for sharing 👍👍👍👍👍.
Glad you like it!
except that it barely pits some plywood with a 1.6 tip :) but very nice to see
To make this small item you have shown so many tools to use,
I take that as a compliment XD
Good show. I will have a cool pen drill by today. Thanks
Thank you, I hope yours will be better than mine.
Świetny pomysł
失敗するところも見せてくれるのが良いですね。
this is a good channel not music just skills !! thats music for my ears
I'm very glad to hear that! Thank you! :D
@@roomspaceplayground thanks to you, really beautiful work and excellent channel
Great project! 😄
Super fanstatic
Good job 👍
Cool Design, It would be great for models and mini build things, where a dremel couldn't fit.
Thank you :D
good job
Комментарий в поддержку канала и ролика, а также труда мастера.
Respected bro really hard work bro...
Thank you bro
It's very nice tools
You can visit my chanel youtube sir.
Maybe you Like my videos. Thx
Um my English bad I'm sorry 🙏
7:39 *At least it is twisted good now* 😄
:D
created a push button on the Mini drill would be more judicious
Yes! I'm planning to upgrade this pen later on. Thank you for the advice! :D
Cool idea. Can it also be used as screwdriver?
Sounds a bit like crying goat lol
thanks! I dont think the motor has enough torque for that. :D
Cool homemade.better give switch on\off and speed control 👌👍😊
Verry Nice project and olso great for carving in to little projects of in a Tiny space and you can dril a hole👌 PS whats the model number from the little DC motor💪 Greets MD 🇳🇱
Thank you, the motor number is LK0236. I also put it in the description. :D
@@roomspaceplayground thanx💪 go on with projects like this make a 2.0 of it 👌 with a speed controller/display, maby a red little stop button and on en of switch, and e put some rubber grip on the pen ..... Love this project AM gonna make IT olso greetings MD
Kereeeeennnn 🤟🏼
Terimakasiiihhh :)
Cus it low voltage use a FET or transistor with a sliding potentiometer needs slowing a bit or even a gearbox helps prevent ya motor from burning it's brushes
Cud even directly connect drills make the drill shaft with a thread or square drive use a magnet to hold it in place
agree, i had the same thought after trying it. but after all this project is just a simple one. I might make a new one with a gearbox like you said next time. Thanks for the advice :)
I never seen before a tiny dc motor like this but i'd to make a drill with a pen. Well....I put "only " five stars to you! ☆☆☆☆☆ Excellent.
Wow, thanks alot!
Is he on a ship? The wood creaking in the background
Wow! It's craft skiil.!
You are now ready to "hang out your 'Dentistry' shingle"! The problem is in my one remaining tooth, doctor. 8-D
Idenya bagus banget
Terima kasih :D
Very nice!
nice
Atento a las altas RPM de esos motores son de alto riesgo cuando se utilizan en funciones a lo que no están diseñados. La idea está buena y sirve pero atentos siempre al tema de la seguridad.
That initial start up scared the shit out of me for some reason.
Oops :D
Its nice, but it must been better if you just listed down all the materials you've used in this project.
Hi Thank you.
The materials basically are:
- 1 mm drill bit
- 8 mm chuck for the drill bit. the inner diameter is around 2 mm.
- LK0236 motor
- 8 mm aluminium pipe
- Male and female power connector
- USB cable
Hope it helps :)
Ffs did you watch the video and are you visually impaired or something
@@roomspaceplayground where did you get the motor from??
Keep up good work
Just like a dentist's drill
Thank you, but I don't recommend to use it on yourself :D
Thank you
You're welcome :D
nice............
... отличные получились у тебя дрельки- граверы, я тоже хочу себе сделать подобные, где покупал такие узкие моторчики?!!
I think it is motor for drones. You can try aliexpress or if you have old drones, you might be able to use it.
а какой диаметр вала моторчика от квадрокоптера??!!!!
its great, but does it give high torque? if so, make sure the motor doesn't heat up from overload
not high enough in my opinion, as it will stop if I push a bit deeper. If using it quite some time, it does get warm. That's why it has to use metal body.
I am more worried about the fact that if the bit locks, that motor will keep on turning and binding the wires like it did on the pen
might need to add small bolt on the body for tightener. But it cant be too tight either. ill keep that in mind for the next project. thank you
How do you stop it from overloading or heating up too much?
for now the only option is turn it off i guess
De esto se puede hacer un dremel... Genial.
you can also hide battery inside :D
Nicely done, but I'll stick with my Dremel.
вместо изоленты должна была быть термоусадка. из изоленты со временем полезет клейкая основа и будет грязь.
Thank you for the advice!
Или синию изоленту использовать )))
Отлично. Возьму на заметку.
Jeweller's engraving ?
Speed maybe reduced for engraving
Yes, with a gearbox, it might work for engrave.
7:15 I said to myself, “Is that going to stay on?” and instantly that happened. I felt bad but laughed pretty hard at how I just said it and then that lol
😂😂😂
Very Good ,,,,,,
It does not sound happy, cool though 👍
Thanks :D
Nice , It would Have Been great If You provide a Switch on this
will do on the next version :D
Very good but where found motor PL Write.
Hi Thank you, the motor is LK0236. I'm not sure if it is available in your country, but any small drone motor should work in my opinion.
Thanks .
Nice DIY
@Anant This motor is easily available in Indian market, Be it Delhi or other cities or from online shops like robu etc.
whats th name of gold coloured head ur using to hold bit
I think it is called "drill chuck".
@@roomspaceplayground ok thank you
Great build, Can you please put up a link from where to buy the brass chuck as I'm not able to find one online with a inner diameter of 2mm. Thanks
Actually I found exactly what’s in this video on eBay. Search for “Micro Brass Electric Motor Shaft Clamp Fixture Chuck For Drill Micro Drill Bit”…
Where to buy thay drill head set???
You can search on your local online store.
Неплохо было бы ещё кнопку или рычажок воткнуть, думаю это было бы несложно
I like the look of it , do you think it has enough drive to use a brass or wire wheel ?
as long as you are not pushing it too hard, it works fine
What is the condition of the dc motor when used for a continuous period of at least 10 minutes? Does it become hot?
Definitely
Nice one.
Did you build the red one also is there a video for that?
Thanks, the red one I bought from local online store.
top master
I can do my own dental work with this!
i'm not recommending it ;D
Thank for help
In every video I've seen, the drill chuck was the problem; how to make it? So did you make your own. Or was it premade?
it's premade, found it online.
What is the original small hand drill you are using named and/or found?
I think I found, Meterk Part Number E17695-1. Thanks for sharing! Neat design.
How's it holding up? Still working OK? Thinking a speed controller might be a handy addition if those motors last and you can keep the chuck on.
Hi, my original one has no brand on it, I've got it from some online shop that I forgot already where.
The pen drill is still working just fine, it is just that you cannot push hard like it has not enough torque, besides that it is still working and useful in tight space if you push slowly when you drill :D
Well.
I think i found all the parts in Video now just have to wait for delivery ,Will update this later
Ok So Now that I am Moved in To my new Home I have the time to Build this Drill .
Everything Is going well Except for the Electrical Connection on the end The Ones I ordered are way to big for the tube Do You know what size those are in you project ?
if i remember correctly, it is about 5 mm diameter
Your video was nice and ideas was cool aslo ,so may I requested to kindly Please make DIY BMS lithium battery charger.
It's important part how to charge lithium battery ,that why requested to you please make "DIY BMS lithium battery charger."easy and simple
Definitely on the list. :)
please tell me: what is the diameter of the motor shaft itself?
I have added the information in the description.
The materials basically are:
- 1 mm drill bit
- 8 mm chuck for the drill bit. the inner diameter is around 2 mm.
- LK0236 motor, I think it is a motor for drones.
- 8 mm aluminium pipe
- Male and female power connector
- USB cable
Я заказал моторчик с диаметром 0.8мм. и ничего не подошло 😢😢😢, ждал долго) и диаметр очень маленький, нужно как минимум 1.8 мм. Диаметр вала моторчика!!, Огромное Вам Спасибо за помощь и информацию!!!
Can you give me a link to the 8mm Chuck?
Not very sure if this is the correct one, but here you go :
shopee.vn/B%E1%BB%99-%C4%91%E1%BA%A7u-k%E1%BA%B9p-m%C5%A9i-khoan-mini-tr%E1%BB%A5c-2.0mm-2.3mm-3.17mm-ch%E1%BA%BF-m%C3%A1y-khoan-m%C3%A1y-m%C3%A0i-mini-LK0069-i.8004713.2372391943
Aiya are chak eke keeyede
Price? I would like to purchase one
Sorry, I'm not manufacturing
Helicopter toy motor ??
Yes, I'm pretty sure it is motor for drone.
direct drive from small motor with that thin shaft will hurt the motor... it wont last long...
just dont push it too hard, it still works till now 😁
на корпус можно термоусадку натянуть красивее будит
TOP
This material were from purchased
you can search on your local online store. Most of my materials are from online store.
It sounds like my neighbors civic
Hahahahahha :D
What’s the red one you are using ?
it has no name when i bought it, i got it from local online store long time ago
Chế bằng mô tơ rung của điện thoại siêu nhỏ đi 😂
Muito bom, que motor é esse e onde vende esse modelo
Thank you, i believe this is motor for drones, i found it on local shop
Can i make hole in ceremics and terracotta with this ??
I think it would depends on the drill bit, but imo it's not powerful enough. Only good for carving.
I want this driller can you tell me price
Sorry, not for sale. But thank you for liking it :)
plot twist: you will need a mini drill to build a mini drill
hehe it's a joke, no means of offending
just like when you need a scissor to open the new scissor XD
@@roomspaceplayground lmao
откуда появилась трубка с моторчиком (и каким) так и не понял, но понял что это главная часть устройства
@happyand3847 Не спи когда смотришь. Там есть место где он рассверливает алюминиевую трубку под двигатель.
In the time it took to make this, I could have made it to Lowes and back with a new Dremel and attachments
You can start your dentist workshop now.
I still need the license
I want one set bro
Sorry Im not producing it, Thanks for liking it anyway! :D
Look like freze
Donde consigo la punta del dremel?
I found it on local online shop, people call it chuck or something else I'm no so sure either. But i'm pretty sure store like aliexpress would have many.