@@CarnivalNights yeah the Xbox version says Xbox One also for some reason Very confusing Glad it helped Thanks for watching subscribing and your comment
Edit: thanks for informative video bro!!!❤ For xbox series users hold the right bumper button down when plugging it in if your using the magic boots dongle. It doesn’t mention this in the manual. Im on the haute42 m16 plus for reference For further verification the magic x converter works like a charm too but i prefer the smaller profile of the magic boots dongle! Happy gaming
No problem glad it helped the issue you had I've found some have the same or do what i did below or have no issues. i think its something they do in the factory during production yes it works all the adapters in the video i tested the xbox mayflash stick i did have to hold the button on the side and change the color and wait 10 seconds for each color until i found the right color that works after pressing home slowly over and over for about 10 seconds the first time to find the color hope that helps Thanks for watching subscribing and your comment
@@PalisadeGaming my bad I read that wrong I've seen that on the adapter but never on the magic boot for Xbox too wow Thanks for sharing your steps much appreciated 🙏🏿 and helps a lot Don't know about you but I have seen it take 10 seconds to register the adapter or magic boot in the pass through port on Xbox sometimes I just keep pressing home button slowly until it recognizes it not every time but happens from time to time Great tips Thanks
@ no need to apologize man reading through all the technical stuff and taking care of comments can get hectic especially when labeling is so similar lol but yes definitely man I noticed with the xbox registration it can get a bit wonky. Even in other arcade stick’s that require it. My best bet if it had a hard rime taking was to just reboot back into x-input and then back into xbone mode.
@@plainthehouse3545 I have 2 parts Here's a web config video and a quick start guide with solutions to common issues Hope it helps Thanks for watching subscribing and your comment ua-cam.com/video/FF3XrZfFKac/v-deo.htmlsi=nzbOmp9QawbW6dXG ua-cam.com/video/h-umw1UqxW0/v-deo.htmlsi=BeXOarOBWOkrCGJh
The booter Mayflash Booter or Haute42 Cosmox Booter 5 Is the lowest latency far as I know and the preferred way to play in XBox or PS5 mode as you will not need any other adapter in those modes Thanks for watching subscribing and your comment
@@sosichris Yes works on Haute42 Duelpad GuileKeys ASI and Mayflash Any GP2040 controller and some other firmware controllers with a passthrough port it will work from my testing Hope that helps Thanks for watching subscribing and your comment
@@MiyagiKilla thanks much appreciated 🙏🏿 with a Brooks XB3 adapter They all work on Xbox series x Don't know your country for shipping cost and etc... Amazon AliExpress etc... But to start the Haute42 S16 or T16 model is a good small / large starting point for Haute42 For other brands the Duelpad C12 and Duelpad A16 are good small / large starting points For box style Fightbox has so many styles and options There is really no best I would not recommend the 3D printed pads they are $35 but spend $10-20 more and get the options above to start for large or small and better quality I recommend AliExpress to start using PayPal good price long shipping... Or Amazon is great too higher price fast shipping and easier to return if needed I haven't returned any of mine yet Hope that helps Thanks for watching subscribing and your comment
Just got my s13 and FGC Wingman but I’m having trouble on Tekken 8. For some reason my touch button doesn’t work when pressing it with x to reset training mode. Any advice?
I haven't seen that but I'm curious I need to give that a test I'm out of town for the week But the discord link in the description has a very active general and support channel Ask there and someone has probably seen this before Before you do things I know you tried but my thoughts Did you put the pad in PS5 mode? Did you update the pad to the latest os 0.7.8 or .9 not required but a thought Link in the description at the bottom to a walkthrough video Hope that helps Thanks for watching subscribing and your comment
@@SFLegendsFGC I believe so Sorry I haven't tested myself but I would assume using the Brooks or Mayflash should work on Xbox to PS5 and reverse PS5 to Xbox using the adapter I'll make a note to test good question thanks Thanks for watching subscribing and your comment
With the Mayflash or Brooks XB3 links in the description you should be all set but not sure never tested Thanks for watching subscribing and your comment
how is the booter 5 perfomance in comparison of others ps5 adapters? i mean latency wise....the small dimensions and lower prices are a huge pro. there is any way to test it scentifically ? like capturing the polling rate? or just plugging 2 hitboxes with different adapters one in p1 and other in p2 and throw jabs on practice ahah to see on screen input latency visually (bad english)
I don't have the equipment at this time to tell As the channel grows and I can get more equipment in I will definitely set something like that up I think it will be fun to see the latency of the passthrough port compared to wireless compared to adapter at the end of the cable also We're growing closer to 1000 subs Thanks for watching subscribing and your comment
@@bakigod that is my initial thought as well But I love his question I wish I had the hardware to prove it to you all Because that's what we're all really wanting to see for tournaments the latency issues so great original question All I can say is playing with it it's been a good experience No issues so far
hello, my magicboots is no longer work with ps5 on mayflash f500 v2. Can you test if the magicboots still work with haus42? Thanks! Also, do you know if there is a firmware I can download to update the magicboot?
Hi my magicboot is still working I live streamed with it today and had no issues I have no updates on my magicboot I'm using it out the box I can try to make a note to test it on the Mayflash F500 and see if it still works Thanks for watching subscribing and your comment
@@rainman1498 I hope this isn't spreading I played on the R16 black last night for a couple hours in a tournament and it worked no issues I'm starting to wonder if something is going on I have not updated my magic boot and my pad is running 0.7.10 firmware
Going to brain dump step by step Connect magic to b16 To magic x Make sure you hold the button for Xbox One Check your firmware is 0.7.8 Connect to Xbox Press home button then start and it should work??? Thanks for watching subscribing and your comment
I use Haute42 T16 on Xbox Series X with Magic Boots for Xbox. It's ok, but when I finish playing and turn off the console, the blue LED in Magic Boots is still on. What could be the reason? When I used Magic Boots and Mayflash Arcade Stick (F500 Elite), everything went out when I turned off the console.
I unplug when I'm done But that could be the plug is still giving power to charge your controllers and it's enough to lower the pad Not sure Thanks for watching subscribing and your comment
@@drjones694 I've read in various places that it's an Xbox problem, that the USB ports are always on. People have problems with the LEDs on external drives flashing. Some people are helped by the "Shut Down" option in Xbox power options. Not working for me thou. But it's strange that with Mayflash arcade stick the LED turns off. All that remains is to disconnect the USB cable from Haute42 after each session.
@@jinryo2174 my consoles are always on the shutdown option just in case the power goes out no issues So maybe that's why I don't see it But I have before
Hi my friend im new to this can u help me? So im planning to switch to haute 42 which version i think its t13 so i wanna use on my sereis s which adapter is the best for this hitbox? And how do I change the leds ?
No it doesnt work from my tests I've heard a PS4 controller might work but dont have any to test myself Thanks for watching subscribing and your comment
This is impossible and it's mentioned on GP2040-CE website. I assume that using any of the official hardware to bypass will never be an option because the devs try their best to avoid any legal troubles
Will the magicboots work for series x/s becuse well i want to get an hitbox im currently going for an Haute42 but i wonder with the magicboots becuse i play xbox and mostly on my lab becuse i dont have an desk so not wanting to risk it (i mainly struggle to find it in the eu amazon to)
If I understand right yes you want the Xbox magic boot links to everything in the description If you want the lowest latency If you want to play on your lap The magic boots on Xbox is the way to go When it comes to the Haute42 and Duelpad and any GP2040 devices and the Mayflash F500 with a pass through port for lower latency you will want it I have a link to their discord in the description There is an announcements channel that has all the links you need to find their stores or ask in the general channel for the link as well I'm in the states so not sure the exact EU link Hope that helps Thanks for watching subscribing and your comment
When I plug my Mayflash Magic X into my console my Haute works normal, but as soon as I then plug the Mayflash into the Haute I can’t use the controller anymore. Any advice?
Things i know you've done but have to write my thoughts down.. 1st make sure you padr is on Xbox One mode when you plug it in by holding down R1 or whatever button you have set for Xbox One mode in the Web config site Next plug the MAYFLASH MAGIC-X Adapter into your passthrough port then connect your cable to the console Wait about 10 seconds Then press Home a couple times and the Xbox menu should appear and your set It does respond faster on PS5 Once it is accepted you should be able to unplug the adapter if you want from the pass through port as well on the Xbox. It remembers the adapter as long as you do not unplug the controller and you dont have to keep the adapter plugged into the pass through port the whole time as long as the controller maintains connection to the Xbox console, does not work on PS5 Next updating to latest firmware 0.7.8 or 0.7.9 (not required as long as your on 0.7.6 or above but might as well it's not hard link on the bottom of the description to a video to help you) I hope this makes sense A lot to say in words... If I was on live stream I would show you.. But hope it helps Thanks for watching subscribing and your comment
@@teaenjoyer2225 I believe so as the Mayflash Magic boot says PS4 on it and I use it for PS5 and Xbox series Magic boot says Xbox one on it so I think last gen requires an adapter as well as current gen but can't confirm as I don't own a PS4 so can't confirm Thanks for watching subscribing and your comment
I've seen talk about this on the discord but was hearing it didn't work Out of town but will test when I get back The discord link is in the description and very active They could answer for sure in the support channel just post a support question Thanks for watching subscribing and your comment
@@Ismi2002 I play Tekken 8 weekly using the Booter 5 on multiple pads with no issues I saw a post once on it on Discord but I have 5 Booter 5.s and no issues so far Thanks for watching subscribing and your comment
Hello my dear friend so I want to buy the haute42 for my xbox s does the magic x and magic s-pro 2support it very well im scared it will not work cuz I have been saving money for this for ages plz help me
For Xbox I would recommend the Mayflash MagicBoots Adapter for Xbox One its compact and pretty flush to your controller here's the link. If you need an adapter for end of cord hear are some adapter options also. Thanks for watching subscribing and your comment Xbox Mayflash MagicBoots Adapter amzn.to/3zvVMup Xbox Brooks XB3 amzn.to/3Yz96IQ Xbox Series Mayflash MAGIC-X Adapter amzn.to/4cQUGHU
@@drjones694 so I bought the magicboot xbox one for my xbox series s i don't need to do anything else like upgrade etc.. I just have to plug in my hitbox and it will works right?
i used mine right out the box. just make sure your controller is in Xbox One mode you may need to update the pad to 0.7.10 firmware sometimes they ship with 0.7.7 firmware Thanks for watching subscribing and your comment
@@AdamTruong-ro7dc each brand has adapters for each console I'm not sure which adapter model works on 360 sorry Thanks for watching subscribing and your comment
I'm out of town so can't test But if your pad is in PS5 mode things should work fine The discord link is in the description post in the support channel not general channel a new question post and someone will reply with more details they're pretty active in there Thanks for watching subscribing and your comment
HI. Good Day! I Already Updated firmware ng GP2040ce Set Input mode to PS5 Enabled pass thru on Peripheral Mapping and set value to 28, but still I'm getting 8 minute time out when using the brook wingman fgc as passthru dongle. Am i missing somthing?
@@EkimVillanueva which pad are you using? If on Haute42 I used it yesterday on live stream so it should be working no updates broke anything far as I know so that's good I have a link to their discord in the description Their is a support channel and a lot of members in the community Post there not in general and someone will usually give live support pretty quickly They will ask what version firmware your on 0.7.10 or 0.7.9 etc and the pad version you have Thanks for watching subscribing and your comment
@@egg.8320 there are creators in the discord link in the description I made mine from mixing Google searches and ChatGPT and Mid journey Thanks for watching subscribing and your comment
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Please Subscribe and Like
So close to the 1000 subs goal to make more content
Thank You much appreciated
Good video, my dude. I love the links you have posted in the description, and I will 100% be copying your right-angle USB-C -> 3M cable hook setup.
@@Ukyoprime Thanks 🙏🏾 much appreciated
Glad it helped
Thanks for watching subscribing and your comment
Super useful, thanks, I was second guessing whether I bought the wrong thing since Magicboots has PS4 on it, thanks for clarifying.
@@CarnivalNights yeah the Xbox version says Xbox One also for some reason
Very confusing
Glad it helped
Thanks for watching subscribing and your comment
Edit: thanks for informative video bro!!!❤
For xbox series users hold the right bumper button down when plugging it in if your using the magic boots dongle. It doesn’t mention this in the manual.
Im on the haute42 m16 plus for reference
For further verification the magic x converter works like a charm too but i prefer the smaller profile of the magic boots dongle!
Happy gaming
No problem glad it helped
the issue you had I've found some have the same or do what i did below or have no issues.
i think its something they do in the factory during production
yes it works all the adapters in the video i tested
the xbox mayflash stick i did have to hold the button on the side and change the color and wait 10 seconds for each color until i found the right color that works after pressing home slowly over and over for about 10 seconds
the first time to find the color
hope that helps
Thanks for watching subscribing and your comment
@@PalisadeGaming my bad
I read that wrong
I've seen that on the adapter but never on the magic boot for Xbox too wow
Thanks for sharing your steps much appreciated 🙏🏿 and helps a lot
Don't know about you but I have seen it take 10 seconds to register the adapter or magic boot in the pass through port on Xbox sometimes
I just keep pressing home button slowly until it recognizes it not every time but happens from time to time
Great tips Thanks
@ no need to apologize man reading through all the technical stuff and taking care of comments can get hectic especially when labeling is so similar lol but yes definitely man I noticed with the xbox registration it can get a bit wonky. Even in other arcade stick’s that require it. My best bet if it had a hard rime taking was to just reboot back into x-input and then back into xbone mode.
Do you have a video for beginners like me on what to change on the settings of haute's web config to connect to the ps5?
@@plainthehouse3545 I have 2 parts
Here's a web config video and a quick start guide with solutions to common issues
Hope it helps
Thanks for watching subscribing and your comment
ua-cam.com/video/FF3XrZfFKac/v-deo.htmlsi=nzbOmp9QawbW6dXG
ua-cam.com/video/h-umw1UqxW0/v-deo.htmlsi=BeXOarOBWOkrCGJh
great video thanks for the info
@@phasis97 no problem
Thanks for watching subscribing and your comment
4:09 is there latency like this ? no right ?
The booter
Mayflash Booter
or Haute42 Cosmox Booter 5
Is the lowest latency far as I know
and the preferred way to play in XBox or PS5 mode
as you will not need any other adapter in those modes
Thanks for watching subscribing and your comment
Is Booter 5 works on other pads such as Duelpad A16?
@@sosichris Yes works on Haute42 Duelpad GuileKeys ASI and Mayflash
Any GP2040 controller and some other firmware controllers with a passthrough port it will work from my testing
Hope that helps
Thanks for watching subscribing and your comment
Just amazing, thank you for showing this. Im thinking to buy first one ever, can you suggest me hitbox or haute that will work 100% on Xbox Series X ?
@@MiyagiKilla thanks much appreciated 🙏🏿
with a Brooks XB3 adapter
They all work on Xbox series x
Don't know your country for shipping cost and etc... Amazon AliExpress etc...
But to start the Haute42 S16 or T16 model is a good small / large starting point for Haute42
For other brands the Duelpad C12 and Duelpad A16 are good small / large starting points
For box style Fightbox has so many styles and options
There is really no best
I would not recommend the 3D printed pads they are $35 but spend $10-20 more and get the options above to start for large or small and better quality
I recommend AliExpress to start using PayPal good price long shipping... Or Amazon is great too higher price fast shipping and easier to return if needed
I haven't returned any of mine yet
Hope that helps
Thanks for watching subscribing and your comment
Just got my s13 and FGC Wingman but I’m having trouble on Tekken 8. For some reason my touch button doesn’t work when pressing it with x to reset training mode. Any advice?
I haven't seen that but I'm curious I need to give that a test
I'm out of town for the week
But the discord link in the description has a very active general and support channel
Ask there and someone has probably seen this before
Before you do things I know you tried but my thoughts
Did you put the pad in PS5 mode?
Did you update the pad to the latest os 0.7.8 or .9 not required but a thought
Link in the description at the bottom to a walkthrough video
Hope that helps
Thanks for watching subscribing and your comment
does the mayflash allow you to use xbox controller on ps5?
@@SFLegendsFGC I believe so
Sorry I haven't tested myself but I would assume using the Brooks or Mayflash should work on Xbox to PS5 and reverse PS5 to Xbox using the adapter
I'll make a note to test good question thanks
Thanks for watching subscribing and your comment
@drjones694 please let me know
Question if I have a ps5 or ps4 arcade stick with these adaptors can I use to use those sticks on my Xbox ?
With the Mayflash or Brooks XB3 links in the description
you should be all set but not sure never tested
Thanks for watching subscribing and your comment
@@drjones694 mayflash magic x correct?
@@vrcx999
Xbox Mayflash MagicBoots Adapter
amzn.to/3zvVMup
Xbox Series Mayflash MAGIC-X Adapter
amzn.to/4cQUGHU
Xbox Brooks XB3
amzn.to/3Yz96IQ
how is the booter 5 perfomance in comparison of others ps5 adapters? i mean latency wise....the small dimensions and lower prices are a huge pro.
there is any way to test it scentifically ? like capturing the polling rate? or just plugging 2 hitboxes with different adapters one in p1 and other in p2 and throw jabs on practice ahah to see on screen input latency visually (bad english)
I don't have the equipment at this time to tell
As the channel grows and I can get more equipment in I will definitely set something like that up
I think it will be fun to see the latency of the passthrough port compared to wireless compared to adapter at the end of the cable also
We're growing closer to 1000 subs
Thanks for watching subscribing and your comment
correct me if i'm wrong but theoretically since theyre only doing the "passthrough" to ps5, there shouldn't be any delay at all. (?)
@@bakigod that is my initial thought as well
But I love his question I wish I had the hardware to prove it to you all
Because that's what we're all really wanting to see for tournaments the latency issues
so great original question
All I can say is playing with it it's been a good experience
No issues so far
Maybe it's a late answer but they've been tested by the firmware devs and they have minimal latency
hello, my magicboots is no longer work with ps5 on mayflash f500 v2. Can you test if the magicboots still work with haus42? Thanks! Also, do you know if there is a firmware I can download to update the magicboot?
Hi my magicboot is still working I live streamed with it today and had no issues
I have no updates on my magicboot I'm using it out the box
I can try to make a note to test it on the Mayflash F500 and see if it still works
Thanks for watching subscribing and your comment
my magicboots also stopped working, haute 42 s13. ive tried literally everything and nothing has fixed it.
@@rainman1498 I hope this isn't spreading
I played on the R16 black last night for a couple hours in a tournament and it worked no issues
I'm starting to wonder if something is going on
I have not updated my magic boot and my pad is running 0.7.10 firmware
My magic x doesnt work on my haute42 b16/series s, nothing happens when i plug it in really don't know what to do
Going to brain dump step by step
Connect magic to b16
To magic x
Make sure you hold the button for Xbox One
Check your firmware is 0.7.8
Connect to Xbox
Press home button then start and it should work???
Thanks for watching subscribing and your comment
Hi did it work?
I use Haute42 T16 on Xbox Series X with Magic Boots for Xbox. It's ok, but when I finish playing and turn off the console, the blue LED in Magic Boots is still on. What could be the reason?
When I used Magic Boots and Mayflash Arcade Stick (F500 Elite), everything went out when I turned off the console.
I unplug when I'm done
But that could be the plug is still giving power to charge your controllers and it's enough to lower the pad
Not sure
Thanks for watching subscribing and your comment
@@drjones694 I've read in various places that it's an Xbox problem, that the USB ports are always on. People have problems with the LEDs on external drives flashing. Some people are helped by the "Shut Down" option in Xbox power options. Not working for me thou.
But it's strange that with Mayflash arcade stick the LED turns off.
All that remains is to disconnect the USB cable from Haute42 after each session.
@@jinryo2174 my consoles are always on the shutdown option just in case the power goes out no issues
So maybe that's why I don't see it
But I have before
Hi my friend im new to this can u help me? So im planning to switch to haute 42 which version i think its t13 so i wanna use on my sereis s which adapter is the best for this hitbox? And how do I change the leds ?
Can i connect a ps5 controller to the passthrough port and have it work like an adapter?
No it doesnt work from my tests
I've heard a PS4 controller might work but dont have any to test myself
Thanks for watching subscribing and your comment
@@drjones694 you're welcome man, thanks for letting me know!
This is impossible and it's mentioned on GP2040-CE website. I assume that using any of the official hardware to bypass will never be an option because the devs try their best to avoid any legal troubles
Will the magicboots work for series x/s becuse well i want to get an hitbox im currently going for an Haute42 but i wonder with the magicboots becuse i play xbox and mostly on my lab becuse i dont have an desk so not wanting to risk it (i mainly struggle to find it in the eu amazon to)
If I understand right
yes you want the Xbox magic boot links to everything in the description
If you want the lowest latency
If you want to play on your lap
The magic boots on Xbox is the way to go
When it comes to the Haute42 and Duelpad and any GP2040 devices and the Mayflash F500 with a pass through port for lower latency you will want it
I have a link to their discord in the description
There is an announcements channel that has all the links you need to find their stores or ask in the general channel for the link as well I'm in the states so not sure the exact EU link
Hope that helps
Thanks for watching subscribing and your comment
@@drjones694 it does thank you
When I plug my Mayflash Magic X into my console my Haute works normal, but as soon as I then plug the Mayflash into the Haute I can’t use the controller anymore. Any advice?
Things i know you've done but have to write my thoughts down..
1st make sure you padr is on Xbox One mode when you plug it in by holding down R1 or whatever button you have set for Xbox One mode in the Web config site
Next plug the MAYFLASH MAGIC-X Adapter into your passthrough port then connect your cable to the console
Wait about 10 seconds
Then press Home a couple times and the Xbox menu should appear and your set
It does respond faster on PS5
Once it is accepted you should be able to unplug the adapter if you want from the pass through port as well on the Xbox. It remembers the adapter as long as you do not unplug the controller and you dont have to keep the adapter plugged into the pass through port the whole time as long as the controller maintains connection to the Xbox console, does not work on PS5
Next updating to latest firmware 0.7.8 or 0.7.9 (not required as long as your on 0.7.6 or above but might as well it's not hard link on the bottom of the description to a video to help you)
I hope this makes sense
A lot to say in words...
If I was on live stream I would show you..
But hope it helps
Thanks for watching subscribing and your comment
hey, will i need one of those to play on ps4?
@@teaenjoyer2225 I believe so as the Mayflash Magic boot says PS4 on it and I use it for PS5 and Xbox series Magic boot says Xbox one on it
so I think last gen requires an adapter as well as current gen but can't confirm as I don't own a PS4 so can't confirm
Thanks for watching subscribing and your comment
@@drjones694 it's a pity, for someone who has just started with fighting games it's quite a big investment
Is it possible that we just plug an Xbox controller to the hautepad through usb port and then hautepad starts working on xbox ?
Is it possible?
I've seen talk about this on the discord but was hearing it didn't work
Out of town but will test when I get back
The discord link is in the description and very active
They could answer for sure in the support channel just post a support question
Thanks for watching subscribing and your comment
I heard that booter 5 when it connect to ps5 it doesn't work on ps5 native games is that right
@@Ismi2002 I play Tekken 8 weekly using the Booter 5 on multiple pads with no issues
I saw a post once on it on Discord but
I have 5 Booter 5.s and no issues so far
Thanks for watching subscribing and your comment
Hello my dear friend so I want to buy the haute42 for my xbox s does the magic x and magic s-pro 2support it very well im scared it will not work cuz I have been saving money for this for ages plz help me
And which adapter is better and cheaper for Xbox series s
For Xbox I would recommend the Mayflash MagicBoots Adapter for Xbox One its compact and pretty flush to your controller here's the link. If you need an adapter for end of cord hear are some adapter options also.
Thanks for watching subscribing and your comment
Xbox Mayflash MagicBoots Adapter
amzn.to/3zvVMup
Xbox Brooks XB3
amzn.to/3Yz96IQ
Xbox Series Mayflash MAGIC-X Adapter
amzn.to/4cQUGHU
@@drjones694 so I bought the magicboot xbox one for my xbox series s i don't need to do anything else like upgrade etc.. I just have to plug in my hitbox and it will works right?
i used mine right out the box. just make sure your controller is in Xbox One mode you may need to update the pad to 0.7.10 firmware sometimes they ship with 0.7.7 firmware
Thanks for watching subscribing and your comment
@ how do i make to xbox ond mode?
Do any of these work with Xbox 360?
@@AdamTruong-ro7dc each brand has adapters for each console
I'm not sure which adapter model works on 360 sorry
Thanks for watching subscribing and your comment
You don't need an adapter
Question: for touchscreen function in ps5 (like in tekken used for restart) how the adaptor/ passthrough will handles the touchscreen button?
I'm out of town so can't test
But if your pad is in PS5 mode things should work fine
The discord link is in the description post in
the support channel
not general channel
a new question post and someone will reply with more details they're pretty active in there
Thanks for watching subscribing and your comment
HI. Good Day! I Already
Updated firmware ng GP2040ce
Set Input mode to PS5
Enabled pass thru on Peripheral Mapping and set value to 28, but still I'm getting 8 minute time out when using the brook wingman fgc as passthru dongle. Am i missing somthing?
@@EkimVillanueva which pad are you using?
If on Haute42 I used it yesterday on live stream so it should be working no updates broke anything far as I know so that's good
I have a link to their discord in the description
Their is a support channel and a lot of members in the community
Post there not in general and someone will usually give live support pretty quickly
They will ask what version firmware your on 0.7.10 or 0.7.9 etc and the pad version you have
Thanks for watching subscribing and your comment
@@drjones694 I'm using it on my Custom MIXBOX
Yo howd u get custom art for ur haute
@@egg.8320 there are creators in the discord link in the description
I made mine from mixing Google searches and ChatGPT and Mid journey
Thanks for watching subscribing and your comment