HVAC Service Call | Troubleshooting a Blower Motor

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 85

  • @HVACUncensored
    @HVACUncensored 10 років тому +5

    I just wanna say thank you for making these videos I've been in the field for quite a few years but I'm no super tech by no means so I really appreciate people like you making these videos!!

    • @HVACShopTalk
      @HVACShopTalk  10 років тому +2

      Gil Cavey Jr no problem Gil, its fun

  • @bluestarorion
    @bluestarorion 9 років тому +7

    Great video! I was able to fix my Goodman for 17 bucks all due to a bad run capacitor. Thanks so much for making this video.

  • @JOEYHIPHOP2008
    @JOEYHIPHOP2008 9 років тому +1

    Thank you for this video .I could have not fixed my Furnace with out this video . My mom Marjorie thanks you to From the top to the bottom of are heart .

  • @1984juant
    @1984juant 11 років тому +4

    Changeout soon!!!...hey i like the new toy you have to check temperatures. Handy when using it with those gauges.
    Thanks for sharing.

    • @HVACShopTalk
      @HVACShopTalk  11 років тому +2

      Good for "tech on the go". Thanks

  • @estrelladelnorte1308
    @estrelladelnorte1308 10 років тому

    man you should of been on the music business, i am glad you share your knowledge with us.

    • @HVACShopTalk
      @HVACShopTalk  10 років тому

      estrelladelnorte1308 Thanks, that is kind of you

  • @stevenlavimoniere
    @stevenlavimoniere 11 років тому +1

    good video zack,,, close to home is always good . i aways like to see heat pumps,, seeing i don't run across them to offen being up north .most of the heat up north is gas ,oil boilers ,furnaces.but i did shut off a iced up heatpump today,no heat call . it was a block of ice totaly .maybe i can get some video on the problem once it thows out ,condenser was on heat mode all iced with the fan running .it should be intresting .the duct work was a mess also . no stactic pressure 8" line taken off end of duct .what a joke

    • @HVACShopTalk
      @HVACShopTalk  11 років тому +1

      Sounds like a mess. This place is like that, old ducting partially insulated and falling apart. Only 2/3 of the air even makes it into the building.

  • @classic-hb8vs
    @classic-hb8vs 10 років тому

    thank you for sharing. I learn a little more each time I watch this.

  • @jimbola77
    @jimbola77 9 років тому +2

    Dam Talyn Your'e gifted!!! u can sing and your a great tech!!!

  • @bushcraftchip
    @bushcraftchip 9 років тому

    I use a 3 degree td between rv lines for proof of leaking. Great video. Love your channel bud...

    • @HVACShopTalk
      @HVACShopTalk  9 років тому +1

      Thanks. 3 degrees should work well.

  • @rayneedaebluz
    @rayneedaebluz 6 років тому

    best video I've seen so far and trust me have seen many! great job!

  • @tomcat27557
    @tomcat27557 9 років тому +2

    remember you have to clean off your copper lines with sandscreen where you place your probes or you want get a accurate temp reading.

  • @rogervaughn1854
    @rogervaughn1854 8 років тому

    Thermostat lost power for me too, but found it was caused by galvanic corrosion of the aluminum power cable connection to the copper leads. Stripped the wires back cleaned them real well and used oxide preventing electrical grease before adding the scotch locks. Powered up and fixed the issue.

  • @charlesbryant8947
    @charlesbryant8947 7 років тому

    I like how you check everything before you change parts I work with some fellow all they do is change parts before they test

  • @heribertogarcia412
    @heribertogarcia412 11 років тому

    happy holidays for you and you family I ben watching your videos for long time I want to say thank you for all your tips I really appreciate your hard work

  • @TandNServices
    @TandNServices 11 років тому +4

    Half way through the video I was thinking that thing needs to be changed!!!!! Then you got to the compressor not starting. Looks you may be changing out a package unit my friend

    • @HVACShopTalk
      @HVACShopTalk  11 років тому +2

      Hey, its what I do best Ralph. Yea you could watch and find reasons to change that thing out every 3 or 4 minutes.

  • @Hvacmania
    @Hvacmania 5 років тому

    Will a single stage outdoor unit work with a single stage indoor unit ?

  • @eagletek1
    @eagletek1 11 років тому +1

    Have you seen problems with the inducer pressure switch on a Goodman gas furnace?

    • @HVACShopTalk
      @HVACShopTalk  11 років тому

      I dont see a lot of gas furnaces but I have changed one Goodman switch on a 95% furnace.

  • @CM_AFFORDABLE_ROOF_REPAIR
    @CM_AFFORDABLE_ROOF_REPAIR 7 років тому

    Thanks for the video's. My unit is 4 years old and it seems like the blower will come on most times but sometimes it will not start and it starts getting hot because the heating element is on. I can't seem to find a video about this, do you know what it might be? If I spin it by hand it will take off and start blowing. Just curios. Any input would be great, Thanks

  • @RAGENBUQUE
    @RAGENBUQUE 10 років тому

    Man, i'm glad you and the rest of the other real pro's upload these videos...I was going to school for this trade but unfortunately the school closed it's doors 3 month's b4 i could take my final exams...but i pretty much kept up with my studies and presently still looking for work here in New Mexico...i have learned alot and i'm gonna see if i can go for my journeymans & nate licenses...just wanted to know if you have any suggestions regarding study materials,guides, etc.. regarding those licenses...i'd appreciate any feedback..thanks and keep them videos rolling.

  • @HVACUncensored
    @HVACUncensored 10 років тому

    Hey Zach where did you get those fittings for your little gauge set I really like that idea I bought a Suction Gauge and a Liquid Gauge but can't find a way to connect to the unit! Thanks in advance

  • @AdamCanFly
    @AdamCanFly 10 років тому

    I have a Rheem rgua-080c in my attic. Today it started making a loud humming noise. The blower still turns, but I can't figure out what the humming is. It ran hard all summer then we had a cool day yesterday so it had time to rest. Do you think it's the motor or a bearing or something?

  • @samacochan
    @samacochan 7 років тому

    Hi, I am checking my HVAC and the blower motor has four wires - black, brown, blue and green. There are two capacitors for the fan. ( and a separate one for the compressor) When I tested the wiring with the multimeter, there is reading when I connect black and brown. When I test blue with all other wires, there is nothing at all. I saw most motor has a white wire but mine doesn't have one. Can you help please.
    Capacitors are all good but the HVAC won't start up.

  • @josearellano3268
    @josearellano3268 7 років тому

    Will that capacitor not make your unit work if it's bad..?? Please reply...

  • @rayneedaebluz
    @rayneedaebluz 6 років тому

    now if I could get you to come figure out my unit, it's 100 degrees lol, I'ma troubleshooting!

  • @andysmechanical7825
    @andysmechanical7825 11 років тому

    enjoy all your videos. thanks

  • @michaelbrewer1474
    @michaelbrewer1474 6 років тому

    Amp clamp go around the high speed black wire? Love the videos thank you

    • @HVACShopTalk
      @HVACShopTalk  6 років тому

      "common" or motor speed (black for high) is what you would test.

  • @jaimearteaga3718
    @jaimearteaga3718 10 років тому +1

    HEY, TALYN ! IT IS A GOOD VIDEO THANKS.

  • @paulhuff4265
    @paulhuff4265 2 роки тому

    Thanks for this video!

  • @vicentehenriquez6131
    @vicentehenriquez6131 8 років тому

    Why does it show 2.5 amps when it was not working right and less amps when the capacitor was changed

    • @HVACShopTalk
      @HVACShopTalk  8 років тому

      The run cap helps the motor turn efficiently. With a bad a weak cap the amp draw will be higher

    • @arrealhandymanservice4459
      @arrealhandymanservice4459 7 років тому

      If the motor isn't blowing like it used to could it also be the cap I didn't check the cap on one of my tenants,,,,,

  • @meonetallguy
    @meonetallguy 9 років тому

    Hi talyn875. Thanks for the video. I have an old gas furnace. Back in Dec. 2014 the furnace started short cycling & would take a long time to get up to desired temperature so I changed the Fan & Limit Control (Honeywell L 4064 B) & the furnace was working fine for the remainder of the winter season. This winter the furnace was working fine to about (1/18/16) 4 days ago. Once again short cycling. My F&L control has a press/pull peg, pulled out puts the blower in auto mode, pushed in is manual mode that overrides auto & should turn the blower on until I turn the blower off. I pushed in the peg to manual & the blower fan jumps to life but for short burst only or doesn't operate at all this takes place whether "calling" for heat or not. When power is on I can hear the transformer humming & sometimes a short burst of the motor but then it dies down. So I'm beginning to think it's the blower motor/capacitor & not the F&L control. I'll spin the finned blower wheel & quickly turn the power on & wheel will kick in for a short while then shut off. Long post I know...any suggestions/input would be greatly appreciated. Thank you.

    • @TriDaddy
      @TriDaddy 7 років тому

      meonetallguy was it the capacitor?

  • @arrealhandymanservice4459
    @arrealhandymanservice4459 7 років тому

    Newbeee... alert..... so I get confused on amp draw what wire do u take your amp reading on btw I have a fan that is not pushing like it used to I checked relay n that's good .. could it be cap or just motor is bad? I work for 400 apartment complex

  • @cindymitchell8334
    @cindymitchell8334 10 років тому

    please my blower is not working does it have a relay switch ?

  • @posttopstreetlight1055
    @posttopstreetlight1055 3 роки тому

    Do you still have that unit

  • @twinels2
    @twinels2 9 років тому

    I had a blower motor wasn't working. I replaced it and the capacitor. Now it isn't getting power. I have checked the obvious, no door safety and the breakers are on. It will not come on even with the switch on fan mode.

    • @flybackdiode9580
      @flybackdiode9580 7 років тому

      Sharon Walton Dead fan motor?

    • @racegrubb2152
      @racegrubb2152 2 роки тому

      If the motor isn't getting power the relay for it isn't closing or the coil side of the relay isn't getting its 24 volt call

  • @patrickriley9368
    @patrickriley9368 10 років тому +2

    I really wish I could find a good HVAC guy who doesn't mind doing a little "moonlighting" to make some extra money. That way he could make extra money, and I can get a reduced rate. I realize that the reason the bigger companies have to charge so much is the overhead, but wow, I need to find a cheaper rate. I am just not cut out for this type of work myself, I'm all thumbs and also I am 65 with arthritis.

    • @mfb5642
      @mfb5642 7 років тому

      cost me 600 to have a motor blower changed out in my old handler unit.

  • @MrLaffertyheating
    @MrLaffertyheating 7 років тому

    Like the jam at the end of thus one! Put it on wjr!

    • @HVACShopTalk
      @HVACShopTalk  7 років тому

      Jeremy Calvin I will! man I might have to rerecord it.

  • @philiplowery977
    @philiplowery977 11 років тому

    Nice video. At least it didn't cost anything for gas. Lol thanks for sharing.

    • @HVACShopTalk
      @HVACShopTalk  11 років тому

      Thanks Philip, it was a nicest call you can have on Friday night.

  • @danieltmaide
    @danieltmaide 10 років тому

    great video!

  • @hvactecster79
    @hvactecster79 11 років тому

    Great job Zack !! I believe that one will be residing in the boneyard before long. Love the Hilmor temp meter/probes. Take care, Brett.............PS...Can you add a 79 to the end of my username ? Thanks.

    • @HVACShopTalk
      @HVACShopTalk  11 років тому

      Brett the part of my brain that makes credits will never do them correctly I fear. I will make the change and thanks for watching.

    • @hvactecster79
      @hvactecster79 11 років тому

      Thanks, don't want anyone to miss out on my 6 videos lol.

    • @HVACShopTalk
      @HVACShopTalk  11 років тому

      hvactecster79 That is hilarious Brett. We will make them the best damn 6 videos on UA-cam!

    • @hvactecster79
      @hvactecster79 11 років тому

      LOL

  • @josesousa3288
    @josesousa3288 10 років тому

    thanks for this video, it was a lot helpfull. god bless you! :D

  • @juanherbert6788
    @juanherbert6788 9 років тому

    Definetly not hammer the reversing valve you could damage the valve body

    • @HVACShopTalk
      @HVACShopTalk  9 років тому +4

      You can tap it to switch it sometimes.

  • @tomcat27557
    @tomcat27557 9 років тому

    do you realize you have the side off the unit so it not drawing air across the coil as it should...thats why its freezing up. Ive done that before myself.

  • @nisw1918
    @nisw1918 10 років тому

    Check out my army surplus diesel unit ( please see video ) How hard would it be to put a functional reversing valve on it ? Thanks gave you a thumbs up .

  • @posttopstreetlight1055
    @posttopstreetlight1055 2 роки тому

    Ge makes good units

  • @markcotter2355
    @markcotter2355 2 роки тому

    Liked It

  • @Blake4Truth
    @Blake4Truth 8 років тому

    Should be titled "troubleshooting a blower motor and heat pump."

  • @Nutintoitbut2doit
    @Nutintoitbut2doit 11 років тому

    I hope you get to replace that old hog

  • @jfreeman702
    @jfreeman702 10 років тому

    It looks like that unit needs to be replaced.

  • @troycampbell4116
    @troycampbell4116 9 років тому

    If cap is FAT??.IT'S FLAT BAD!!!

  • @hoangthainam
    @hoangthainam 11 років тому

    Good

  • @ike2167
    @ike2167 7 років тому

    That looks heathy

  • @brandonhvacants2217
    @brandonhvacants2217 10 років тому

    Just let it die it's tired and wants to be recycled. Lol

    • @HVACShopTalk
      @HVACShopTalk  10 років тому

      It's actually still there, performing badly as I write.

    • @posttopstreetlight1055
      @posttopstreetlight1055 3 роки тому

      It is a good quality made in America unit not like the newer cheper units

  • @scooterp21
    @scooterp21 10 років тому

    69