I did this in my living room with the same exact wood and my Home Depot cut all of the 8 inch strips for me and wow I did a large area. My husband thought I was crazy and could not see the vision and told me I was wasting my time and money. Low an behold he absolutely loves it and keeps asking me when am I going to do the powder room? I don't think he will question me ever again haha.. I recently just built a farm house table myself and again he was blown away but he was smart and didn't say anything til I was done .. he again couldn't believe it. Glad I came across your channel tonight and subscribed ...
That's awesome, Kim! Nice work and glad to hear that some Home Depots are still cutting 8" strips. We've done this in the past and they cut 8" strips but this last time they said they wouldn't. Kind of lame, especially if we're willing to pay. Keep on knocking out those projects! By the way, I'm just about finished building our new dining room table so I'm looking forward to catching up with you :)
I saw a video where a lady painted the space in between each strip before installing the next one. Which made it easier in the end to paint the whole wall without trying to get paint into those cracks even though it might seem as time consuming
To all those commenting on the 1st piece.... The 1st piece WAS level. it’s the ceiling that’s not. Only way to ensure the rest of the wall is straight. He did it right. Maybe cover with crown molding.
Just use a framing L square and slide it across the rows. Shoot one side and slide it to the other. Bice clean even spacing and you dont have to even remove the spacer until you are done. I find that to be the perfect even space. And if you own that tool you never have to find anything else to ever space with. Usually when you go shiplap and see how wonderful it is, you tend to keep adding. Easy to overdo it lol
Awesome! This is exactly what I’m looking to do. Great idea on using the thin plywood. Easier to work with, cheaper, and doesn’t require me to rip off old door casings to accommodate a thicker board.
Just found you as I’m in planning stage of a bathroom renovation . Nicely done video and ship lap wall cover looks great. I have old plaster walls on 2 sides, in this 1890 home which need covering. Cheers
This is the video I have been looking for and didn’t know existed! Super helpful and love the way it turned out. Ignore the haters, some people are perfectionists, but I bet you get a lot of compliments on it regardless and if your home makes you happy then no one else’s opinion matters 😊
Thanks for letting us have that good last look at your finished project at the end of your video !!! Good job on your video ! A lot of videos forget to spend good filming time to show the finished project.
Same here. Gap at top was very bad and then small pieces on right side were bad too. Should have cut more off first board then stagger then next row and so forth.
I know it’s been 7 years since you did this, but I need to know how well it held up and is there a shower in that bathroom. My husband says the moister from the shower will get behind the boards and cause mildew. I don’t think so, but that could be wishful thinking ha! I did my kitchen this way and I’m so in love with it!
I just had some cut into 6" strips because I thought 8" was too thick -- though looking at this, I'm thinking maybe I should have gone with 8". Looks good! Would like it if you slowed down a bit or zoom into the special cuts with the outlets because I have to do a bunch of those.
Don't forget to put some trim at the top of the door to hide the unsquare room edge. Paint will hide it as you did But trim seal the deal....It;s all about the detail.
Adam Willea - Because the boards are only 1/8” thick, I just cut the “ship lap” to where it was covered by the switch plate and placed the plate right on top of it. I didn’t use box extenders because between the switch screws and the plate screws there was enough play to make up the difference.
What about the humidity in the bathroom? Or it doesn’t have a shower? I’d love to have that in my bathroom but some black spots are appearing above the shower wall and I need to find a way to get rid of that 🙁
My bathroom was just a half bath, so not a lot of humidity but you can install this in a full bath. You'll want to use a thick coat (or two) of mold/mildew resistant paint, and be sure to seal the corners with caulking. The special paint makes all the difference in prevention of issues related to humidity.
THE Jigsaw and me are terrible - CAN'T CUT STRAIGHT lines if my life depended on it .STARTED this project yesterday - Home Depot ripped all the sheets for me but the cuts using a jigsaw are terrible ....... What type of Saw will i need for even simply cutting the ends to length? Do I need a sliding chop saw?
Wasn’t sure I understood if you put putty in the horizontal gaps? I got that you did in one version & didn’t in another version & liked the putty in the gaps? But it still leaves enough of a gap to maintain shiplap look? I’m a beginner ..
Good question. I was referring to puttying in the vertical lines and the nail holes. By putting over the vertical lines/gaps, you make each row look like one continuous piece, rather than two or more individual pieces per row. It's all just a personal preference but I liked the clean look of the puttied nail holes and vertical gaps. Hope that makes sense.
Is there anyway you can stain it to look vintage or aged wood i want to do it for my kitchen backsplash but im going for antique look or a very country look
Have you ever dry brushed this finish in a flat white paint, so it looks more like what Joanna & Chip Gains does on their shows? I would like to see how that turns out because that's the finish I like the best.
Could you do this over popcorn? People that own the house before put popcorn on the Walls in the bathroom and it has been paint over many time so it will just be hard to try and remove it. I dont really want to have yo tear the walls down and redo them. Maybe you have some other advice?
Same as upstairs. We started with full sized boards up against the ceiling, added our gaps and then stacked down from there. Ideally, you pick the area that is most visible (often that's the ceiling line, but not always) and put a full board there and then move up/down after that.
Looks very good! But I did this around my bath, and the timber swells and shrinks due to the moisture in the air. Do you think this will happen on the walls? 👍🏻
Great question. I think it'll be fine on the walls because this is a half bath that doesn't get very damp at all. Same with the mudroom. I can see how putting it near/around a bath or shower would be problematic since the wood can absorb moisture somewhat. The shiplap in our basement has been there all year and looks great still. Thanks for watching!
Shaun Chadwick plywood doesn't swell or move with the seasons or moisture like solid wood, solid wood swells with the grain when it gets most, the grains of the ply's are alternating preventing the wood from swelling. MDF is also an excellent choice for a paintable surface because it's cheaper, and I would highly recommend using construction adhesive.
In this case, no. The plywood only added about 1/8" to the wall thickness, which is a depth that can be compensated for with the screws of the outlet. I did remove the outlets and sit them on top of the plywood, so that the faceplate would seat properly but that's it.
If you shoot into the sheetrock and not the stud, your planks will be able to be pulled out and, worse, may not lay flat on the wall to begin with. If you use adhesive of some sort that will do the job but it's a lot harder to remove if you want to take the planks down at some point.
Wouldn't you have to remove the floor molding and door trim and put the plywood down to the floor and butted against the door? Then reinstall the trim . Otherwise if you have trim that is not thick, the plywood will be sitting on top of it.
How important is it that the dry wall surface is completely even? I have new drywall just put up but it has not been taped or putty'd, so there is a little uneven-ness. Will the plywood cover this up or should i smooth out the drywall with tape and putty first?
Great question. As long as the drywall is screwed into place securely, you should be fine. I did this exact same thing in my basement bathroom - no mud or tape, just faux shiplap on bare drywall and it worked out fine. You can take a look here: ua-cam.com/video/70bVcAc9NbA/v-deo.html
Unfortunately there’s no simple answer there. Concrete usually needs a vapor barrier over it and, depending on the situation, insulation. Technically you could fasten some vertical firring to the wall and tack Shiplap into that but there’s all kinds of code considerations to look into.
Make sure to use plastic spark rings around switches and outlets. Electrical code does not allow wood between the electrical box in the wall and the yoke of the switch/ outlet
that's keepin it real.. like the vid, just one question: how well does plywood stain, i'd love to do stain and keep the natural color of wood.. thanks and GOD BLESS.
lovelylouro The process in your case should be just what you see in the video. Just be sure to keep the door open and a fan on for ventilation while caulking and painting. Good luck!
I'm construction challenged to sat the least. I'd like to attempt this on my kitchen ceiling which is super imperfect. Thoughts on whether it would work? Also thoughts on labor cost if I decided to hire out?
Ive seen people use wood or laminate flooring and painting over it. Its basically pre cut except the ends and it looks really good. If u know a builder, a lot of times u can pick up their leftovers from a job pretty inexpensively
I did this in my living room with the same exact wood and my Home Depot cut all of the 8 inch strips for me and wow I did a large area. My husband thought I was crazy and could not see the vision and told me I was wasting my time and money. Low an behold he absolutely loves it and keeps asking me when am I going to do the powder room? I don't think he will question me ever again haha.. I recently just built a farm house table myself and again he was blown away but he was smart and didn't say anything til I was done .. he again couldn't believe it. Glad I came across your channel tonight and subscribed ...
That's awesome, Kim! Nice work and glad to hear that some Home Depots are still cutting 8" strips. We've done this in the past and they cut 8" strips but this last time they said they wouldn't. Kind of lame, especially if we're willing to pay. Keep on knocking out those projects! By the way, I'm just about finished building our new dining room table so I'm looking forward to catching up with you :)
Kim Bryan what was the average Cost? And the square feet of the room
I hope your husband was cooking dinner for you while you did all the hard stuff
Kim Bryan Go Team Kim!
My husband said the same thing to me and it turned out great
I saw a video where a lady painted the space in between each strip before installing the next one. Which made it easier in the end to paint the whole wall without trying to get paint into those cracks even though it might seem as time consuming
WOW! For a 20 year old i'm learning alot from all the content you're putting on your channel.
Hopefully this becomes bigger than UA-cam for you man!
Thanks, Theo!
To all those commenting on the 1st piece.... The 1st piece WAS level. it’s the ceiling that’s not. Only way to ensure the rest of the wall is straight. He did it right. Maybe cover with crown molding.
Uh, anything wrong with tracing the ceiling to the first board and making it right to start with?
for spacer i used that free paint stirrer they give for free at home depot
Or just use a cutoff from the plywood itself
Just use a framing L square and slide it across the rows. Shoot one side and slide it to the other. Bice clean even spacing and you dont have to even remove the spacer until you are done. I find that to be the perfect even space. And if you own that tool you never have to find anything else to ever space with. Usually when you go shiplap and see how wonderful it is, you tend to keep adding. Easy to overdo it lol
@@mirahgirl01 love this tip, thanks man!
OMG .. i been searching for easy affordable way to do this project in my 20 year old rv i'm renovating ..thanks for this short video
Awesome! This is exactly what I’m looking to do. Great idea on using the thin plywood. Easier to work with, cheaper, and doesn’t require me to rip off old door casings to accommodate a thicker board.
Just found you as I’m in planning stage of a bathroom renovation . Nicely done video and ship lap wall cover looks great. I have old plaster walls on 2 sides, in this 1890 home which need covering.
Cheers
thank you for saying faux. far too many people do this sort of install and refer to it as actual ship lap. good work
i love when folks refer to a wood accent wall as ship-lap, no ship-lap is a joint on the wood
This is called Planking, Shiplap interlaps
This is the video I have been looking for and didn’t know existed! Super helpful and love the way it turned out. Ignore the haters, some people are perfectionists, but I bet you get a lot of compliments on it regardless and if your home makes you happy then no one else’s opinion matters 😊
This is the best DIY on the cheap shiplap I've ever seen 😊 Thank you for sharing 👍
I’m getting ready to do faux shiplap using coins between 5 1/2” mdf. Thanks for the great video to help me get started
Thanks for this! Was going to order some faux peel and stick but I think I’ll try this instead! Love it!
Thank you for this video. My wife and I started on ours today. This was a big help. Thank so much
looks good! I just finished a shiplap wall in my hearth room. I love it! I did 6 inch strips!
Awesome idea! I have some customers that would LOVE the cost saving way of this ship lap look. ☆☆☆☆☆
Thanks for letting us have that good last look at your finished project at the end of your video !!! Good job on your video ! A lot of videos forget to spend good filming time to show the finished project.
The best! We actually covered our popcorn ceilings with a similar method a few months ago. So much easier than scraping (and sooo pretty!)
I have a ceiling as you mentioned. Do you have any pics of the finished project? I would love to see the results. Thanks in advance.
Hi Kelsey, did you do DIY or hire out. This is exactly what I want but probably need to get someone to do the labor.......
That's what I like a affordable option, loos great, guys!
The track saw at the store will often cut out of square due to improper setup..
Had some real expensive cab grade material I got to learn this on..
that first board though...
literally couldn't watch the rest of the video because of it
I know right! Haha.
Who needs a level?
Same here. Gap at top was very bad and then small pieces on right side were bad too. Should have cut more off first board then stagger then next row and so forth.
I was thinking the exact same thing. A piece of trim would hide it.
Used power tools are often a low cost option. With market place and craigs list good deals are easy to find.
I know it’s been 7 years since you did this, but I need to know how well it held up and is there a shower in that bathroom. My husband says the moister from the shower will get behind the boards and cause mildew. I don’t think so, but that could be wishful thinking ha! I did my kitchen this way and I’m so in love with it!
LOVE that color you picked!!! But I was looking at the natural wood and I fell in love with that too lol I can't choose.
Cool that your wife is there hanging out and helping a bit 👌
I just had some cut into 6" strips because I thought 8" was too thick -- though looking at this, I'm thinking maybe I should have gone with 8". Looks good! Would like it if you slowed down a bit or zoom into the special cuts with the outlets because I have to do a bunch of those.
Looks super good and I like the color better then that diff that comes ready made
Thank you for making this, we are doing this to our sunroom and this will save a lot of money.
Your work is really good can you show how to put a handrail up on a front porch. The post will be in concrete thanks
Thank you for showing how to do shiplap this way. It looks amazing!
Don't forget to put some trim at the top of the door to hide the unsquare room edge. Paint will hide it as you did But trim seal the deal....It;s all about the detail.
Please explain what you did for the light switches area. Did you install box extenders? Or just screw directly into the plywood?
Adam Willea - Because the boards are only 1/8” thick, I just cut the “ship lap” to where it was covered by the switch plate and placed the plate right on top of it. I didn’t use box extenders because between the switch screws and the plate screws there was enough play to make up the difference.
Hi.love the Video. can you show us how to do a VERICAL Board bottom., with trim? we will paint the wood white & tan wall. ty Boston.
I hate music during DIY videos but this was still good. Great idea!
My Home Depot did all the 8 inch cuts for me. Saved me having to buy a table saw.
Those sheets are 40 bux now. Haha. Crazy. I know because I just bought 3 and did a 12 foot wall. Good job. Looks niiiice. 👌
thanks for all this tips, and especially for your time.. take care.
Lowe’s has a 5mm plywood and it’s super smooth. I think that works better than regular plywood
Might want to put lite coat of paint on the wail prior to putting up the shiplap, that should help the the gap problem.
YES... Very True!!!
And painting the edges of the board prior to putting them up...but sometimes on 1st projects its live and learn as u go
Great job , please give more details about the paint you have used , and from where u bought it . thx
Nice shiplap bathroom ... Keep going with your Diy ... Home ideas.. More please.. Kitchen next .. I'm waiting...lol
Good job I like it... One suggestion is to prime all pieces on ALL sides before you do any installation
John Limongello prime them as in sanding them?
Large gap on upper ceiling left hand corner, how you fixed that? Caulk?
at least its not dry way that everybody and his brother has! looks good!
Love both looks. I have always loved the look of shiplap know I know how to achive it here were we don't have it.
What about the humidity in the bathroom? Or it doesn’t have a shower? I’d love to have that in my bathroom but some black spots are appearing above the shower wall and I need to find a way to get rid of that 🙁
My bathroom was just a half bath, so not a lot of humidity but you can install this in a full bath. You'll want to use a thick coat (or two) of mold/mildew resistant paint, and be sure to seal the corners with caulking. The special paint makes all the difference in prevention of issues related to humidity.
LRN2DIY thank you for replying! I do appreciate it 😊
THE Jigsaw and me are terrible - CAN'T CUT STRAIGHT lines if my life depended on it .STARTED this project yesterday - Home Depot ripped all the sheets for me but the cuts using a jigsaw are terrible .......
What type of Saw will i need for even simply cutting the ends to length? Do I need a sliding chop saw?
Wasn’t sure I understood if you put putty in the horizontal gaps? I got that you did in one version & didn’t in another version & liked the putty in the gaps? But it still leaves enough of a gap to maintain shiplap look? I’m a beginner ..
Good question. I was referring to puttying in the vertical lines and the nail holes. By putting over the vertical lines/gaps, you make each row look like one continuous piece, rather than two or more individual pieces per row. It's all just a personal preference but I liked the clean look of the puttied nail holes and vertical gaps. Hope that makes sense.
Is there anyway you can stain it to look vintage or aged wood i want to do it for my kitchen backsplash but im going for antique look or a very country look
Have you ever dry brushed this finish in a flat white paint, so it looks more like what Joanna & Chip Gains does on their shows? I would like to see how that turns out because that's the finish I like the best.
Nice! When I do walls I start from the bottom let gravity help me out but to each their own nice work bro
That makes sense for sure. Good tip.
Could you do this over popcorn? People that own the house before put popcorn on the Walls in the bathroom and it has been paint over many time so it will just be hard to try and remove it. I dont really want to have yo tear the walls down and redo them. Maybe you have some other advice?
How did you determine where to put the horizontal lines in the basement ?
Same as upstairs. We started with full sized boards up against the ceiling, added our gaps and then stacked down from there. Ideally, you pick the area that is most visible (often that's the ceiling line, but not always) and put a full board there and then move up/down after that.
Looks very good! But I did this around my bath, and the timber swells and shrinks due to the moisture in the air. Do you think this will happen on the walls? 👍🏻
Great question. I think it'll be fine on the walls because this is a half bath that doesn't get very damp at all. Same with the mudroom. I can see how putting it near/around a bath or shower would be problematic since the wood can absorb moisture somewhat. The shiplap in our basement has been there all year and looks great still. Thanks for watching!
Shaun Chadwick plywood doesn't swell or move with the seasons or moisture like solid wood, solid wood swells with the grain when it gets most, the grains of the ply's are alternating preventing the wood from swelling. MDF is also an excellent choice for a paintable surface because it's cheaper, and I would highly recommend using construction adhesive.
What would you do for the edges if the edges don’t hit a corner of the wall? We’re doing a shiplap accent behind a tv and fireplace on a flush wall.
I'd add a piece of vertical trim (chair rail, pencil molding, etc.) to serve as an edge for the ends of the shiplap to butt up against.
How did you install the wall light on top of the shiplap? Did you use an electrical box extender??
I would use some interior glue like PL375 and use thicker wood. Home Depot now sells ship lap.
Do you also have a DIY video for the door frame in the video?
Looks beautiful
Is it possible to do it over ceramic walls ?
You could technically glue it over ceramic walls using liquid nails but I haven't tried it myself.
@@LRN2DIY thank you!
any moisture concerns putting up plywood strips in the bathroom?
MrSeaneboy good question
Thank you for this video! We just bought our first home. This is helpful for the remodel!
Did you have to pull your electrical boxes out in order to put them flush with the new wall...?
In this case, no. The plywood only added about 1/8" to the wall thickness, which is a depth that can be compensated for with the screws of the outlet. I did remove the outlets and sit them on top of the plywood, so that the faceplate would seat properly but that's it.
Can anyone tell me whether or not it’s a MUST to shoot the brads into the studs? Or will it suffice to just shoot into Sheetrock???
If you shoot into the sheetrock and not the stud, your planks will be able to be pulled out and, worse, may not lay flat on the wall to begin with. If you use adhesive of some sort that will do the job but it's a lot harder to remove if you want to take the planks down at some point.
Wouldn't you have to remove the floor molding and door trim and put the plywood down to the floor and butted against the door? Then reinstall the trim . Otherwise if you have trim that is not thick, the plywood will be sitting on top of it.
How important is it that the dry wall surface is completely even? I have new drywall just put up but it has not been taped or putty'd, so there is a little uneven-ness. Will the plywood cover this up or should i smooth out the drywall with tape and putty first?
Great question. As long as the drywall is screwed into place securely, you should be fine. I did this exact same thing in my basement bathroom - no mud or tape, just faux shiplap on bare drywall and it worked out fine. You can take a look here: ua-cam.com/video/70bVcAc9NbA/v-deo.html
What would you use if u want to cover a cement wall and make it into shiplap ??
Unfortunately there’s no simple answer there. Concrete usually needs a vapor barrier over it and, depending on the situation, insulation. Technically you could fasten some vertical firring to the wall and tack Shiplap into that but there’s all kinds of code considerations to look into.
@@LRN2DIY ohhh i see thank you 😊
where did u buy this shiplap my friend i stay in Scotland glasgow UK
For someone experienced in construction do you think it would be possible to leave the wood natural?
Mary P Absolutely. You can stain it, putty it or whatever you like.
How many sqft of wall did you cover?
fixer upper with the gaines must have a big part in bringing on this recent shiplap craze.
A bag of tile spacers will work as well
Can I do this for the floor?
Hello. Did you also build the white coat rack? Or did you buy that? If so how or where? Love it thank you!!
Actually, that came with the house so I don’t have any info. Sorry.
bought 1/8 inch didn't seem right should it have been 1/4?
Make sure to use plastic spark rings around switches and outlets. Electrical code does not allow wood between the electrical box in the wall and the yoke of the switch/ outlet
Love it but had a problem with the gap on the top=left board close to the ceiling other than that, looks great.
Did you have to remove the toilet to install the shiplap ?
If you're careful about it, no. You can use longer boards behind the tank so that you can fasten them on either side of the toilet instead.
I have a thought, paint a thin coat your wall the color of paint you plan on using for the shiplap.
nice idea...but i always thought shiplap had a slight over lay almost like shingles? Your choice of material and method were spot on :)
This is called Planking, not Shiplap. Yes Shiplap interlocks with a slight overhang
How do you handle a wall over 8 feet wide?
How did you deal with baseboards?
Rather than paint can you stain it & then poly it?
CWright0215 Sure, that would work too.
is there any idea for the internal roof which is without plaster please suggest
that's keepin it real.. like the vid, just one question: how well does plywood stain, i'd love to do stain and keep the natural color of wood.. thanks and GOD BLESS.
it stains quite nicely
Look up diy stained plywood floors
Awesome video. In hindsight would you have preferred to paint the edges of the board before you hung them?
Yes, absolutely
Great thanks. Two more questions. Why are they called Brad nails, and why is the jigsaw cord so short?
Another tip I’ve seen is to paint as you go in between the boards!
Looks really nice. Going to have to try this.
Awesome. But why not paint wood prior to installation?
Any tips for doing this in a small bathroom without a window or vent? Do we have to seal anything? Thank you, looks awesome!
lovelylouro The process in your case should be just what you see in the video. Just be sure to keep the door open and a fan on for ventilation while caulking and painting. Good luck!
lovelylouro We are going to do this and run the fan and open the door :)
How would this last in a bathroom with a shower? Would the steam warp it?
Awesome video man! Very informative! I'm going to use this method for my house we are building!! 😎😎
That turned out really nice. Thank you for this video.
Beautiful result
I'm construction challenged to sat the least. I'd like to attempt this on my kitchen ceiling which is super imperfect. Thoughts on whether it would work? Also thoughts on labor cost if I decided to hire out?
Ive seen people use wood or laminate flooring and painting over it. Its basically pre cut except the ends and it looks really good. If u know a builder, a lot of times u can pick up their leftovers from a job pretty inexpensively
Do you have link for wood?
This is exactly what I want to do in my half bath and another room. Are you for hire?☺️
Super simple and super nice
What’s your ceiling design? Do you think it would look good if it’s shiplap as well?
Nice, clean cut look.
NICE. My Lowes does not have 1/8 plywood. I only see 1/4
Too bad