Sky Viper v2400HD drone modifications - part 1
Вставка
- Опубліковано 3 жов 2024
- Latest! • Sky Viper v2400HD dron...
Sky Viper v2400HD drone modifications specifically LED upgrade modification and battery upgrade modification not mentioned anywhere else on You tube as of this date. LED modification increased the visibility of the LEDs. This helps flying and navigating the drone. Standard battery only lasts 7.5 to 8 minutes while this battery modification gives you 15 to 16 minutes. Short flight demo towards the end of video.
If anyone is interested in more specific technical information please let me know.
For the next video in this series please see:
• Sky Viper v2400HD dron...
And for the third video with longer drone flight footage with this battery LED upgrade combo, please see:
• Sky Viper v2400HD dron...
I love the smooth voice!
Its called miliamp hours
lol Thanks!
3.7 3.7 - 7.4v
You want to go series instead of parallel ? Have you done that? Has it burnt the circuitry yet?
No it’s still works
@@rcworld7146 Gains in speed, performance?
Naseem Max Mansoor It’s a bit over powered On sensitivity 3 it’s goes Insanely fast like I mean it’s goes 30.2mph
@@rcworld7146 Wow. Very nice. I am worried about the the circuits burning out but I will try it myself and post a video. Do post a video if you have made one. Thanks.
Cool tricks
I want to do this to my batteries I bought 4 sky viper batteries for my sky viper hover racer drone. I did some mods with it to make it lighter plus took the sensors out of it for the beacons and the game mode that works with the app. I'm going to add to it a led head light mod so I can fly it at night but the battery mod I need to do this to it
I will post a detailed battery mod video very very soon :)
ua-cam.com/video/4L4c_YdgLu0/v-deo.html
I took my camera board completely out, and did this mod. i almost get 25 mins of flight time from a full charge.
Wow 25 minutes! that is a lot! You did this with 2 batteries if I understand correctly. Which batteries did you use? make ? mah?
nice video... but can I do the same for a sky viper s1700
You probably can.
hello Sir doesn't that burn something ?
What I wrote to you previously should not burn anything unless something is already wrong. In which case you are the best judge!
how do you solder the two batteries together??
Kidd lalalal
Will be posting a detailed video very soon :)
ua-cam.com/video/4L4c_YdgLu0/v-deo.html
ua-cam.com/video/4L4c_YdgLu0/v-deo.html
RED together, BLACKS together.
how did you do that??? please..
Jeff, video coming up soon
ua-cam.com/video/4L4c_YdgLu0/v-deo.html
U can just buy a 1600mah battery instead of two that weigh twice as much and only gives u 100 more mah
Tell me which one? give me an amazon link. I will make the mod and post the video here. I have looked at a 2200 mah shaver battery that would work fine and should give around 50 minutes of flying time. Interested?
The highest I can find is 1200, if you have a link to purchase higher mah please post...Thanks, Colin
Collin I am not sure if the question is aimed at JROD or myself. I am not sure if I know of a 1600 mAh battery that would fit the drone without some tinkering!! Let me know. Happy New Year. Cheers.
Ya I can post a link for ya I'll do it inna few when I get home sorry just seen this.
hey bro what if i used 3 battery
Probably too heavy for the craft!
hello sir i really need ur help my remote is beeping and the drone dont respond i just put brand new battery and my drone just got charge
Hi there GAR. If I understand this correctly you replaced the batteries in your controller and the drone, and the controller is beeping. Do the following. Get new batteries for the controller one more time. Replace the drone battery with a new freshly charged battery one more time. Connect the drone battery first. Then turn on your controller with your left joystick pushed all the way down towards yourself. Wait 1 minute and then please tell me what are the results. Cheers.
I need some help. I was flying my SkyViper 2400HD today when one of the props flew off mid flight and after inspecting it I found the reason was a small metal clip that holds the shaft that the prop is on. Where could I get another one of those metal lock clips or how could I fix it otherwise?
James check these out.......
www.getfpv.com/replacement-c-clips-for-2mm-shafts-10pcs.html
replacementparts-skyrockettoys-com.3dcartstores.com/Streaming-v2400HDFPV-Motor-and-Gear-Set_p_64.html (this one out of stock)
www.amazon.com/Brass-Washer-Plain-Finish-Metric/dp/B009OK2D3E/ref=sr_1_1?s=hi&ie=UTF8&qid=1491745636&sr=1-1&keywords=2.2mm+washer (this should probably work for the washer)
Thanks, they were out but I signed up for when they get more
www.getfpv.com/replacement-c-clips-for-2mm-shafts-10pcs.html
Thanks very much, I appreciate your help.
Same happend to me its called a c clamp i temporarily wrapped a stripped bread tie arounf it and twisted it tight and clipped it not too close to the axle
Can I use 2 of the 1200 mah that viper sells and put them together. I don't know what max mah i can put together.
TheTruth Doesn’t matter about the milliamps It matters about the voltage
The circuitboard can handle 7.4v 2s lipo
Do you know where I can find parts? I need the washer/clip on the bottom of the blade.Somehow we lost the clip and now we can't fly it until we get a replacement.
William check these links please
www.getfpv.com/replacement-c-clips-for-2mm-shafts-10pcs.html
replacementparts-skyrockettoys-com.3dcartstores.com/Streaming-v2400HDFPV-Motor-and-Gear-Set_p_64.html (this one out of stock)
www.amazon.com/Brass-Washer-Plain-Finish-Metric/dp/B009OK2D3E/ref=sr_1_1?s=hi&ie=UTF8&qid=1491745636&sr=1-1&keywords=2.2mm+washer (this should probably work for the washer)
Would the washers be the same size? Just realized that is missing as well. I am searching that parts site right now to try and find them.
The third amazon link above is the washer site. I calipered my washers and those washers "should" do the trick. Just don't come looking for me if they don't :)
Sorry I didn't see the "read more" button before or I would have seen the third link. Appreciate the help. Even if they just work "okay" it's better than the drone not working at all which is the issue. My son will be happy that he gets to fly this again soon.
Would be nice if he could get it in the air again. Good luck. Do let me know if I can be of assistance.
where did you get the batteries from
Hi Kidd. Apologies for replying so late :) Please check out the following links.
www.amazon.com/gp/product/B016ZM3LCK/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
www.amazon.com/gp/product/B01ALV6NSA/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Thanks! time for mods now
The charging port for mine detached, any idea how I can fix it, or where to order a new one? I'm assuming I need it for any of the batteries, mod or no mod.
Which charging port. The two wires that run into the drone itself?
Naseem Mansoor the one directly below the on and off switch. the little white piece you plug the charger into.
Are you talking about the Sky Viper v2400HD or some other model?
Naseem Mansoor it looks just like yours. I believe they're the same model
Mine does not have a charging port or an on off switch. Maybe I could help if you can tell me the model.
were i can buy those batteries?
Luis check these links please
www.amazon.com/gp/product/B016ZM3LCK/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
www.amazon.com/gp/product/B01ALV6NSA/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
Watching vid just subbed nice vid man gonna get a 2450 and try aome sruff out would appriciate a subb gonna keep up on your vids
Thank you my friend. Subbed!